• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2005년도 International Meeting on Information Displayvol.II
• /
• pp.1536-1537
• /
• 2005

We have made point electron sources using carbon nanotubes (CNTs). For the fabrication of point electron sources, CNTs were dispersed in a solution and attached on electrochemically etched W tips using electrophoresis. In our study, we have utilized various CNTs such as single-walled CNT (SWCNT), multiwalled CNT (MWCNT), and thin-MWCNT and threshold current, turn-on voltage, filed enhancement factor of each emitter have been studied upon a tube/bundle diameter and length. In addition, fieldemitted electron energy distribution of various CNT emitters is characterized.

• Smart Structures and Systems
• /
• 제18권4호
• /
• pp.787-800
• /
• 2016

The aim of the paper is to analyze nonlinear transverse vibration of an embedded piezoelectric plate reinforced with single walled carbon nanotubes (SWCNTs). The system in rested in a Pasternak foundation. The micro-electro-mechanical model is employed to calculate mechanical and electrical properties of nanocomposite. Using nonlinear strain-displacement relations and considering charge equation for coupling between electrical and mechanical fields, the motion equations are derived based on energy method and Hamilton's principle. These equations can't be solved analytically due to their nonlinear terms. Hence, differential quadrature method (DQM) is employed to solve the governing differential equations for the case when all four ends are clamped supported and free electrical boundary condition. The influences of the elastic medium, volume fraction and orientation angle of the SWCNTs reinforcement and aspect ratio are shown on frequency of structure. The results indicate that with increasing volume fraction of SWCNTs, the frequency increases. This study might be useful for the design and smart control of nano/micro devices such as MEMS and NEMS.

• Computers and Concrete
• /
• 제25권6호
• /
• pp.485-495
• /
• 2020

This paper, presents the dynamic and stability analysis of the simply supported single walled Carbon Nanotubes (SWCNT) reinforced concrete beam on elastic-foundation using an integral first-order shear deformation beam theory. The condition of the zero shear-stress on the free surfaces of the beam is ensured by the introduction of the shear correction factors. The SWCNT reinforcement is considered to be uniform and variable according to the X, O and V forms through the thickness of the concrete beam. The effective properties of the reinforced concrete beam are calculated by employing the rule of mixture. The analytical solutions of the buckling and free vibrational behaviors are derived via Hamilton's principle and Navier method. The analytical results of the critical buckling loads and frequency parameters of the SWCNT-RC beam are presented in the form of explicit tables and graphs. Also the diverse parameters influencing the dynamic and stability behaviors of the reinforced concrete beam are discussed in detail.

• Advances in nano research
• /
• 제7권1호
• /
• pp.39-49
• /
• 2019

This paper focuses on two main objectives. The first one is to exploit an energy equivalent model and finite element method to evaluate the equivalent Young's modulus of single walled carbon nanotubes (SWCNTs) at any orientation angle by using tensile test. The calculated Young's modulus is validated with published experimental results. The second target is to exploit the finite element simulation to investigate mechanical buckling and natural frequencies of SWCNTs. Energy equivalent model is presented to describe the atomic bonding interactions and their chemical energy with mechanical structural energies. A Program of Nanotube modeler is used to generate a geometry of SWCNTs structure by defining its chirality angle, overall length of nanotube and bond length between two adjacent nodes. SWCNTs are simulated as a frame like structure; the bonds between each two neighboring atoms are treated as isotropic beam members with a uniform circular cross section. Carbon bonds is simulated as a beam and the atoms as nodes. A finite element model using 3D beam elements is built under the environment of ANSYS MAPDL environment to simulate a tensile test and characterize equivalent Young's modulus of whole CNT structure. Numerical results are presented to show critical buckling loads, axial and transverse natural frequencies of SWCNTs with different orientation angles and lengths. The understanding of mechanical behaviors of CNTs are essential in developing such structures due to their great potential in wide range of engineering applications.

• 대한기계학회논문집B
• /
• 제38권7호
• /
• pp.601-605
• /
• 2014

일반적으로 표면적/부피비가 큰 전도성 다공체는 수퍼캐패시터의 전극이나 흡수제, 유연히터 등의 다양한 분야에 적용되어 왔다. 본 논문에서는 이러한 전도성 다공성 구조의 역학적 전기적 특성을 이용하여 고감도 압력센서를 구현하였다. 탄소나노튜브 용액에 스펀지를 적셔 다공체에 전도성을 부여하였으며, 압력에 따른 전도성 다공체의 저항 변화를 측정하였다. 전도성 스펀지에 압력이 가해졌을때, 각각의 탄소나노튜브들은 서로 맞붙게 되어 저항이 최대 20%까지 줄어듦을 확인하였다. 부드럽고 탄성력이 뛰어난 탄소나노튜브 스폰지는 반복적인 압축실험에도 모양의 변형 없이 매우 빠르게 안정화되고 일정한 저항변화를 확인할 수 있었다. 또한 스펀지 압력소자를 유연소자에 적용하기 위하여 탄소나노튜브 트랜지스터와 연결하여 외부압력에 따른 전기적 특성변화를 측정하였다.

• Structural Engineering and Mechanics
• /
• 제59권3호
• /
• pp.431-454
• /
• 2016

In this paper, the nonlinear static and free vibration analysis of Euler-Bernoulli composite beam model reinforced by functionally graded single-walled carbon nanotubes (FG-SWCNTs) with initial geometrical imperfection under uniformly distributed load using finite element method (FEM) is investigated. The governing equations of equilibrium are derived by the Hamilton's principle and von Karman type nonlinear strain-displacement relationships are employed. Also the influences of various loadings, amplitude of the waviness, UD, USFG, and SFG distributions of carbon nanotube (CNT) and different boundary conditions on the dimensionless transverse displacements and nonlinear frequency ratio are presented. It is seen that with increasing load, the displacement of USFG beam under force loads is more than for the other states. Moreover it can be seen that the nonlinear to linear natural frequency ratio decreases with increasing aspect ratio (h/L) for UD, USFG and SFG beam. Also, it is shown that at the specified value of (h/L), the natural frequency ratio increases with the increasing the values amplitude of waviness while the dimensionless nonlinear to linear maximum deflection decreases. Moreover, with considering the amplitude of waviness, the stiffness of Euler-Bernoulli beam model reinforced by FG-CNT increases. It is concluded that the R parameter increases with increasing of volume fraction while the rate of this parameter decreases. Thus one can be obtained the optimum value of FG-CNT volume fraction to prevent from resonance phenomenon.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.396-396
• /
• 2008

투명 전도성 탄소나노튜브(carbon nanotube, CNT) 필름을 터치스크린이나 디스플레이 소자 등의 전극에 응용할 목적으로, CNT 필름의 전기저항 및 광 투과도를 향상시키기 위한 연구가 활발히 진행되고 있다. 본 연구에서는 단일벽 CNT (single-walled CNT)를 여러 가지 계면활성제로 분산시킨 수용액으로부터 제조한 CNT 필름을 산 처리하여 저항 및 투과도의 변화를 관찰하였다. 우선 계면활성제로 분산시킨 CNT 수용액을 알루미나 재질의 필터에서 정량적으로 진공 필터링하여 CNT 필름을 제조하였다. 알루미나 필터를 sodium hydroxide (NaOH) 수용액으로 용해시켜 제거함으로써 얻은 CNT 필름을 유리기판 위에 부착시킨 후 광 투과도와 먼 저항 (sheet resistance)을 측정하였다. CNT 필름을 질산 ($HNO_3$) 용액에 처리하였을 때 투과도는 1~5 % 향상되었으며, 면 저항은 계면활성제로 분산시킨 CNT 필름 대부분에서 감소하였다. 이는 CNT 표면에 코팅되어 있던 계면활성제들이 산에 의해 제거되었기 때문일 것으로 추측된다. 특히 sodium dodecylbenzene sulfonate (NaDDBS)로 제조한 CNT 필름의 경우, 질산을 처리 전에는 투과도 83%, 면 저항 450 $\Omega$/sq.의 특성을 보였으나, 처리 후에는 각각 86 %, 350 $\Omega$/sq.로 향상되었다. Polyvinyl pyrrolidone (PVP)과 cetyltrimethylammonium bromide (CTAB)를 사용하여 제조한 CNT 필름의 면 저항이 가장 뚜렷한 감소를 보였다. 제조된 필름과 삼 처리된 필름 특성을 Raman spectroscopy, scanning electron microscopy, UV-Vis spectroscopy 등을 이용하여 분석하였고, 4-point probe로 면 저항을 측정하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2010년도 하계학술대회 논문집
• /
• pp.264-264
• /
• 2010

Single-walled carbon nanotubes (SWCNTs) were grown on a Si wafer by using thermal chemical vapor deposition (t-CVD). We investigated the effect of the catalyst deposition rate on the types of CNTs grown on the substrate. In general, smaller islands of catalyst occur by agglomeration of a catalyst layer upon annealing as the catalyst layer becomes thinner, which results in the growth of CNTs with smaller diameters. For the same thickness of catalyst, a slower deposition rate will cause a more uniformly thin catalyst layer, which will be agglomerated during annealing, producing smaller catalyst islands. Thus, we can expect that the smaller-diameter CNTs will grow on the catalyst deposited with a lower rate even for the same thickness of catalyst. The 0.5-nm-thick Fe served as a catalyst, underneath which Al was coated as a catalyst support as well as a diffusion barrier on the Si substrate. The catalyst layers were. coated by using thermal evaporation. The deposition rates of the Al and Fe layers varied to be 90, 180 sec/nm and 70, 140 sec/nm, respectively. We prepared the four different combinations of the deposition rates of the AI and Fe layers. CNTs were synthesized for 10 min by flowing 60 sccm of Ar and 60 sccm of $H_2$ as a carrier gas and 20 sccm of $C_2H_2$ as a feedstock at 95 torr and $810^{\circ}C$. The substrates were subject to annealing for 20 sec for every case to form small catalyst islands prior to CNT growth. As-grown CNTs were characterized by using field emission scanning electron microscopy, high resolution transmission electron microscopy, Raman spectroscopy, UV-Vis NIR spectroscopy, and atomic force microscopy. The fast deposition of both the Al and Fe layers gave rise to the growth of thin multiwalled CNTs with the height of ${\sim}680\;{\mu}m$ for 10 min while the slow deposition caused the growth of ${\sim}800\;{\mu}m$ high SWCNTs. Several radial breathing mode (RBM) peaks in the Raman spectra were observed at the Raman shifts of $113.3{\sim}281.3\;cm^{-1}$, implying the presence of SWCNTs (or double-walled CNTs) with the tube diameters 2.07~0.83 nm. The Raman spectra of the as-grown SWCNTs showed very low G/D peak intensity ratios, indicating their low defect concentrations.

• 청정기술
• /
• 제17권3호
• /
• pp.273-279
• /
• 2011

제조나노물질은 원료물질이 동일하더라도 제조방법에 따라 최종생산물의 물리화학적 특성은 매우 상이해질 수 있고 더불어 독성 또한 크게 달라질 수 있을 것으로 추정되고 있다. 본 연구에서 우리는 2종의 탄소나노튜브(단층벽 탄소나노튜브 및 다층벽 탄소나노튜브)를 마우스에 경구와 경기관지로 처리한 후 체중당 상대무게 및 염증반응 지표를 조사함으로써 길이와 전기전도성에 따른 독성을 동정하였다. 실험 결과, 다층벽 탄소나노튜브의 경우 체중 감소는 길이가 짧은 그룹에서 더 강하게 관찰된 반면, 염증 반응은 비교적 길이가 긴 그룹에서 더 강하게 유도되었다. 경기관지로 처리된 단층벽 탄소나노튜브는 뇌와 신장의 상대무게를 의미있게 감소시켰고, 기관지 세척액과 혈액 내 면역세포의 의미있는 변화는 처리 후 1일과 7일에서 주로 관찰되었다. 이 결과를 통해 길이, 입경, 층벽의 수와 같은 탄소나노튜브의 물리화학적 특성이 물질에 의한 독성과 염증 반응에 매우 중요한 인자로 작용하고 있음을 확인할 수 있었다.

• Geomechanics and Engineering
• /
• 제12권2호
• /
• pp.327-346
• /
• 2017

Laminated plates have many applications in different industrials. Buckling analysis of these structures with the nano-scale reinforcement has not investigated yet. However, buckling analysis of embedded laminated plates with nanocomposite layers is studied in this paper. Considering the single-walled carbon nanotubes (SWCNTs) as reinforcement of layers, SWCNTs agglomeration effects and nonlinear analysis using numerical method are the main contributions of this paper. Mori-Tanaka model is applied for obtaining the equivalent material properties of structure and considering agglomeration effects. The elastic medium is simulated by spring and shear constants. Based on first order shear deformation theory (FSDT), the governing equations are derived based on energy method and Hamilton's principle. Differential quadrature method (DQM) is used for calculating the buckling load of system. The effects of different parameters such as the volume percent of SWCNTs, SWCNTs agglomeration, number of layers, orientation angle of layers, elastic medium, boundary conditions and axial mode number of plate on the buckling of the structure are shown. Results indicate that increasing volume percent of SWCNTs increases the buckling load of the plate. Furthermore, considering agglomeration effects decreases the buckling load of system. In addition, it is found that the present results have good agreement with other works.