• Bulletin of the Korean Chemical Society
• /
• 제30권8호
• /
• pp.1724-1728
• /
• 2009

Severe acute respiratory syndrome coronavirus (SARS-CoV) helicase separates the double-stranded nucleic acids using the energy from ATP hydrolysis. We have measured ATPase activity of SARS-CoV helicase in the presence of various types of nucleic acids. Steady state ATPase analysis showed that poly(U) has two-times higher turnover number than poly(C) with lower Michaelis constant. When M13 single-stranded DNA is used as substrate, the Michaelis constant was about twenty-times lower than poly(U), whereas turnover numbers were similar. However, stimulation of ATPase activity was not observed in the presence of double-stranded DNA. pH dependent profiles of ATP hydrolysis with the helicase showed that the optimal ATPase activities were in a range of pH 6.2 ~ 6.6. In addition, ATP hydrolysis activity assays performed in the presence of various divalent cations exhibited that $Mg^{2+}$ stimulated the ATPase activity with the highest rate and $Mn^{2+}$ with about 40% rate as compared to the $Mg^{2+}$.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 2002년도 봄 학술발표회 논문집
• /
• pp.183-186
• /
• 2002

Polymer composites with carbon nanotubes have recently been investigated for improving certain properties i.e., electrical, optical and mechanical properties[1-3]. Kymakis et. al. have reported the electrical and optical properties of single wall carbon nanotube-poly(3-octylthiophene) composites[4]. Polyurethane dissolved in dimethylformanide (DMF) were electrospun by Demir et. al.[5]. (omitted)

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.372-372
• /
• 2012

We have studied a fabrication of Poly (3,4-ethylenedioxythiophene) (PEDOT) wire arrays and structures with various feature sizes from hundreds micrometers to tens nanometers. PEDOT is well-known as a conducting material, can be grown by a vapor pressure polymerization (VPP) method. The VPP technique is a bottom-up processing method that utilizes the organic arrangement of macromolecules to easily produce ordered aggregates. Also, liquid-bridge-mediated nanotransfer molding (LB-nTM), which was reported as a new direct patterning method recently, is based on the direct transfer of various materials from a mould to a substrate through a liquid bridge between them. The PEDOT nanowires grown by VPP method and transferred on a substrate to use LB-nTM method have been investigated by Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Selected Area Electron Diffraction (SAED), X-Ray Diffraction (XRD), X-ray Photoelectron Spectroscopy (XPS), and electrical properties.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1001-1003
• /
• 1998

In this paper, $Ar^+$ ion laser etching process of single/poly crystalline silicon with $CCl_{2}F_{2}$ gas is studied for MEMS applications. To investigate the effects of process parameters, laser power, gas pressure, scanning speed were varied and multiple scanning was carried out to obtain high aspect ratio. In addition, scanning width was varied to observe the trench profile etched in repeating scanning cycle. From the etching of $2.6{\mu}m$ thick polycrystalline Si deposited on insulator, trench with flat bottom and vertical side wall was obtained and it is possible to apply this results for MEMS applications.

• 전자공학회논문지C
• /
• 제35C권12호
• /
• pp.40-48
• /
• 1998

본 논문에서는 rail-to-rail 복합입력단을 갖는 증폭회로의 옵셋전압을 보상해주기 위한 방법을 제안하고 집적회로로 구현하였다. 두 개의 보조증폭회로와 옵셋보상 커패시터들을 사용하여 NMOS 차동쌍과 PMOS 차동쌍의 옵셋을 각각 보상하고, ping-pong control을 사용하여 연속시간 동작이 가능한 3V rail-to-rail CMOS 증폭회로를 설계하였다. 설계된 증폭회로를 0.8㎛ single-poly double metal CMOS 공정으로 제작한 후 성능을 측정한 결과, 옵셋보상후의 옵셋전압은 옵셋보상전에 비해 약 20배정도 감소하였다.

• 대한전자공학회논문지
• /
• 제24권2호
• /
• pp.254-259
• /
• 1987

This paper describes the CMOS standard cell library implemented in double metal single poly gate process with 3\ulcornerm design rule, and its results of testing. This standard cell library contains total 33 cells of random logic gates, flip-flop gates and input/output buffers. All of cell was made to have the equal height of 98\ulcornerm, and width in multiple constant grid of 9 \ulcornerm. For cell data base, the electric characteristics of each cell is investigated and delay is characterized in terms of fanout. As the testing results of Ring Oscillator among the cell library, the average delay time for Inverter is 1.05 (ns), and the delay time due to channel routing metal is 0.65(ps)per unit length.

• 전자공학회논문지
• /
• 제50권11호
• /
• pp.64-69
• /
• 2013

본 논문에서는 10-bit 해상도의 Two-Step Single-Slope A/D 변환기를 이용한 고속 CMOS Image Sensor(CIS)를 제안하였다. 제안하는 A/D 변환기는 5-bit coarse ADC 와 6-bit fine ADC 로 구성되어 있으며, 기존의 Single-Slope A/D 변환기보다 10배 이상의 변환속도를 나타내었다. 또한 고속 동작에서 적은 노이즈 특성을 갖기 위해 Digital Correlated Double Sampling(D-CDS) 회로를 제안하였다. 설계된 A/D 변환기는 0.13um 1-poly 4-metal CIS 공정으로 제작되었으며 QVGA($320{\times}240$)급 해상도를 갖는다. 제작된 칩의 유효면적은 $5mm{\times}3mm$ 이며 3.3V 전원전압에서 약 35mW의 전력소모를 나타내었다. 변환속도는 10us 이었으며, 프레임율은 220 frames/s으로 측정되었다.

• 폴리머
• /
• 제24권1호
• /
• pp.128-132
• /
• 2000

Polycaprolactone (PCL) 블록의 함량이 62.7 wt%인 PCL-폴리아미드 블록공중합체와 poly(vinyl chloride) (PVC)의 상용거동을 시차주사열량계로 열적 성질을 관찰하여 조사하고, 블렌드물의 인장물성을 측정하였다. PCL과 PVC 세그먼트는 상용성을 가졌으며, PVC의 함량이 많은 경우 PCL의 결정화가 방해받아 PCL과 PVC 세그먼트로 구성된 비결정성 균일상이 형성됨을 알 수 있었다. PCL/PVC 균일 비결정상과 폴리아미드의 결정상이 병존하는 경우 균일 비결정상의 유리전이온도와 결정상의 녹는점 사이의 온도 영역에서 블렌드물은 고무탄성을 가졌다.

• 약학회지
• /
• 제44권4호
• /
• pp.293-299
• /
• 2000

Biodegradable microspheres made from poly-lactide-co-glycolide polymers have been considered as a new delivery system for single-dose vaccine. Purified tetanus toxoid (TT) was encapsulated in poly-lactide(PLA) and poly-lactide-co-glycolide (PLGA) microparticles using a solvent evaporation method in a multiple emulsion system (water-in oil-in water). The morphology of 77-loaded microparticles was spherical and the suface of them was smooth. The particle size was in a range of 2-10. Protein loading efficiency was 68-97.8%. PLGA (85:15) microparticle showed the highest efficiency. Protein release pattern was influenced by polymer molecular weight and composition. The release rate of PLA(Mw 100,000) microsphere was higher than any other microspheres. In consequence of the hydrolysis of PLGA(50:50) microspheres, environmental pH decreased from 7.4 to 5.0. The PLA, PLGA (75:25) and PLGA (85:15) microshperes showed no significant pH change. The antigenicity or n in microshperes was assayed by indirect sandwich ELISA using equine polyclonal tetanus antitoxin for capture antibody and human polyclonal tetanus antitoxin for primary antibody. The antigenicity of TT in PLA (Mw 100,000), PLGA(50:50, Mw 100,000) and PLGA (75:25, Mw 73,300) after 30 days incubation showed 54, 40.9 and 76.7%, respectively.

• Journal of Microbiology
• /
• 제40권2호
• /
• pp.129-133
• /
• 2002

The fungus, Emericellopsis minima W2, capable of degrading poly(3-hydroxybutyrate) (PHB) was isolated from a waste water sample. Production of the PHB depolymerase from E. minima W2 (PhaZ/ sub Emi/) was significantly repressed in the presence of glucose. PhaZ/ sub Emi/ was purified by column chromatography on Octyl-Sepharose CL-4B and Sephadex G-100. The molecular mass of the PhaZ/ sub Emi/), which consisted of a single polypeptide chain, was estimated to be 48.0 kDa by SDS-PAGE and its pI vague was 4.4. The maximum activity of the PhaZ/ sub Emi/ was observed at pH 9.0 and 55$\^{C}$. It was significantly inactivated by 1mM dithiothreitol, 2mM diisopropyl fluorphosphate, 0.1mM Tween 80, and 0.1 mM Triton X-l00, but insensitive to phenylmethylsulfonyl fluoride and N-ethylmaleimide. The PhaZ/ sub Emi/ efficiently hydrolyzed PHB and its copolyester with 30 mol% 3-hydroxyvalerate, but did not act on poly(3-hydroxyoctanoate). It also hydrolyzed p-nitrophenylacetate and p-nitrophenylbutyrate but hardly affected the longer-chain forms. The main hydrolysis product of PHB was identified as a dimer of 3-hydroxybutyrate.