• International Journal of Automotive Technology
• /
• 제6권3호
• /
• pp.235-242
• /
• 2005

This study introduces the Reliability-Based Design Optimization (RBDO) to enhance the kinematic and compliance (K & C) characteristics of automotive suspension system. In previous studies, the deterministic optimization has been performed to enhance the K & C characteristics. Unfortunately, uncertainties in the real world have not been considered in the deterministic optimization. In the design of suspension system, design variables with the uncertainties, such as the bushing stiffness, have a great influence on the variation of the suspension performances. There is a need to quantify these uncertainties and to apply the RBDO to obtain the design, satisfying the target reliability level. In this research, design variables including uncertainties are dealt as random variables and reliability of the suspension performances, which are related the K & C characteristics, are quantified and the RBDO is performed. The RBD-optimum is compared with the deterministic optimum to verify the enhancement in reliability. Thus, the reliability of the suspension performances is estimated and the RBD-optimum, satisfying the target reliability level, is determined.

• ETRI Journal
• /
• 제37권6호
• /
• pp.1199-1210
• /
• 2015

Automatic emotion recognition based on facial cues, such as facial action units (AUs), has received huge attention in the last decade due to its wide variety of applications. Current computer-based automated two-phase facial emotion recognition procedures first detect AUs from input images and then infer target emotions from the detected AUs. However, more robust AU detection and AU-to-emotion mapping methods are required to deal with the error accumulation problem inherent in the multiphase scheme. Motivated by our key observation that a single AU detector does not perform equally well for all AUs, we propose a novel two-phase facial emotion recognition framework, where the presence of AUs is detected by group decisions of multiple AU detectors and a target emotion is inferred from the combined AU detection decisions. Our emotion recognition framework consists of three major components - multiple AU detection, AU detection fusion, and AU-to-emotion mapping. The experimental results on two real-world face databases demonstrate an improved performance over the previous two-phase method using a single AU detector in terms of both AU detection accuracy and correct emotion recognition rate.

• 한국주거학회논문집
• /
• 제18권5호
• /
• pp.33-43
• /
• 2007

This study aimed to analyze residential demands on intelligent systems for apartments and suggest space design directions of intelligent apartment complexes. Data collection was done through mail-in surveys by five respondent groups. Outcomes of this study would provide basic data for developing intelligent apartment housing corresponding to the residential characteristics and demands of the five respondent groups. The sample size for the questionnaire survey was 592. The types of the target residents in this study were classified into five categories; nuclear families, dual income families, single households and the handicapped needing special environmental supports, and workers at home who need the new home design with a home office. The primary findings of this study were as follows. 1) For the controllers of intelligent system, nuclear families preferred TV, single households prefer home-pad which is movable and provides access to the internet. Dual income families, the handicapped and workers at home preferred remote control panels. 2) For the desirable space for computer equipment, regardless of the types of target residents, bedroom and living room were preferred. 3) For the desirable space for a home theater system, most of respondent groups preferred living rooms, but many rather wanted to have media rooms only for this system.

• 한국표면공학회:학술대회논문집
• /
• 한국표면공학회 2015년도 춘계학술대회 논문집
• /
• pp.78-79
• /
• 2015

PVD 공정에서 다성분으로 이루어진 나노복합 코팅을 형성하는 것은 원소들간의 합금화 문제로 인해 어렵다. 따라서 일반적으로 두 개 이상의 원소타겟 또는 멀티타겟을 이용한 PVD+PECVD 의 융합공정에 의해 제조된다. 하지만 멀티타겟을 사용한 공정은 공정의 복잡화가 뒤따르며 신뢰성이 떨어진다. 본 연구에서는 멀티타겟의 단점을 보완하기 위해 Ti-Al-X(Cr, Si, B, V) 단일 합금 타겟을 제작하여 나노복합 코팅을 형성하고자 하였다. 기계적 합금화법을 통해 합금분말을 제조하였으며, 방전플라즈마소결법으로 합금 타겟을 제작하였다. 제작된 타겟을 이용하여 스퍼터링 장치를 통해 박막을 형성 하였다. 그 결과 분말은 밀링 시간 20시간에서 정상상태에 도달하였으며, 더 이상 분말의 입자는 줄어들지 않았다. 이때 분말의 입자크기는 $5{\sim}6{\mu}m$ 이었으며 결정립의 크기는 16~20nm 이었다. 소결을 통해 99% 이상의 진밀도를 갖는 합금타겟을 제작하였으며, 이때 결정립의 크기는 매우 미세하였다. 박막의 경우 모두 30GPa 이상의 고경도 특성을 나타냈다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2000년도 제18회 학술발표회 논문개요집
• /
• pp.213-213
• /
• 2000

Direct laser vaporization of transition-metal(Co, Ni)/graphite composite pellet produced single wall carbon naotubes(SWNT) in the condensing vapor in a heated flow cylinder-type tube furnace, Transition metal/graphite composite pellet target was made by mixing graphite, Co, and Ni in 98:1:1 atomic weight ratios, pressing the mixed powder, and curing it. The target was placed in a tube furnace maintained at 1200$^{\circ}C$ and Ar inert collision gas continuously flowed into the tube. The 2nd harmonic, 532nm wavelength light from Nd-YAG laser was used to vaporize the tube. The carbon nanotubes produced by the laser vaporization were accumulated on quartz tube wall. The raw carbon nanotube materials were purified with surfactants(Triton X-100) in a ultrasonicator. These carbon nanotubes were analyzed using SEM, XRD, and Raman spectroscopic method. The carbon nanotube growth on the Ni-patterned Si substrate was investigated by the CVD process. Transition-metal, Ni and CH4 gas were used as a catalyst and a reactant gas, respectively. The structure and the phonon frequencies of the carbon nanotubes formed on the patterned Si substrate were measured by SEM and Raman spectrometer.

• 한국표면공학회지
• /
• 제45권3호
• /
• pp.117-122
• /
• 2012

ZTO/GZO double layered films were prepared on unheated non-alkali glass substrates. ZTO films were deposited by RF/DC hybrid magnetron co-sputtering using ZnO (RF) target and $SnO_2$ (DC) targets, and then GZO films were deposited by DC magnetron sputtering using an GZO ($Ga_2O_3$:5.57 wt%) target. These films were post-annealed at temperature of 200, $300^{\circ}C$ in air and vacuum ambient for 30 min. In the case of post-annealing in air, ZTO/GZO double layer showed relatively low resistivity change, compared to GZO single layer. Furthermore, ZTO/GZO double layer revealed low WVTR, compared to GZO single layer. Therefore, it can be confirmed that ZTO film doing a role with barrier for water or oxygen diffusion.

• 동국한의학연구소논문집
• /
• 제11권
• /
• pp.66-73
• /
• 2008

Objectives: The study was designed to evaluate the single dose toxicity of modified Bo-yang-Hwan-o-Tang (mBHT) in Sprague-Dawley (SD) rats. Methods: The mBHT was once administrated orally to both sexes of rats at dose 2,000 mg/kg body weight which are the recommended maximum limit dose for acute toxicity. We recorded clinical signs of toxicity, body weight, gross and histological changes in target organs for all rats. Results: Neither significant changes of body weight not death was observed during the observation period in mBHT-administrated rats. Neither significant toxic signs not histopathological changes were shown during the observation period. There were not observed significant gross abnormality between the control and mBHT-administrated rats. Conclusions: These results indicated that the toxicity of mBHT is greater than 2,000 mg/kg body weight in SD rats.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 추계 학술논문 발표대회
• /
• pp.89-94
• /
• 2011

In this research, among thermoplasticity plastic raw material that recycling is possible polyolefine(TPO) and polyvinyl chloride(PVC) as target recycling plan examine wish to. It is polyolefine(TPO) and polyvinyl chloride(PVC)) is mediocrity material that there are a lot of amount useds among plastic material and it is material that recycling is also activated most. Long term made first new regulation raw material, by-product raw material happened at process of production at second factory and third time to examine recycling plan of this material divides this as raw material that pass through process separation and pelet Tuesday and analyzed each special quality removing each removed waste after is used. Measure tension strength and ext. heightening gradually mixing proportion of refreshing resources on standard Sample manufactured as new raw material and application examined possibility availability to single fly system.

• BMB Reports
• /
• 제49권4호
• /
• pp.201-207
• /
• 2016

The CRISPR-Cas system has emerged as a fascinating and important genome editing tool. It is now widely used in biology, biotechnology, and biomedical research in both academic and industrial settings. To improve the specificity and efficiency of Cas nucleases and to extend the applications of these systems for other areas of research, an understanding of their precise working mechanisms is crucial. In this review, we summarize current studies on the molecular structures and dynamic functions of type I and type II Cas nucleases, with a focus on target DNA searching and cleavage processes as revealed by single-molecule observations.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.255-258
• /
• 2008

The DEM (Digital Elevation Model) can be obtained from stereo image pair acquired by LEO satellite. Stereo images may consist of at least two images with different viewing angles to the imaging target for one pass or multiple passes. While each image is generally acquired from each pass in cross-track direction for multiple passes, stereo image pair in along-track direction can be acquired during one pass with attitude control capability for the pitch axis of the satellite. Single pass stereo imaging provides stereo pair image more efficiently on the fact that stereo pair image is generated with less orbit resources and less imaging time consumption. In this paper, the feasibility study result on the stereo pair image collection planning algorithm during single pass is addressed.