• 제목/요약/키워드: single machine

검색결과 1,250건 처리시간 0.027초

정치식 원적외선 건조기를 이용한 수수×수단그라스 교잡종의 건초 조제 기술 연구 (Hay Preparation Technology for Sorghum×Sudangrass Hybrid Using a Stationary Far-Infrared Dryer)

  • 김종근;김현래;이원진;유영상;이연분;왕리리
    • 한국초지조사료학회지
    • /
    • 제43권1호
    • /
    • pp.22-27
    • /
    • 2023
  • 본 시험은 원적외선을 이용한 수수×수단그라스 교잡종 인공건초의 조제 가능성을 확인하기 위해 수행되었다. 본 시험에 사용된 기계는 원적외선을 기본으로 하는 건조 장치로 온도, 송풍량, 원적외선 방사량 및 기류 속도를 조절할 수 있도록 설계되었다. 9월 하순에 수확한 수수×수단그라스 교잡종을 1일간 포장에서 예건을 하였고 이를 대상으로 실시 건조 시험을 수행하였다. 건조를 위한 조건은 전체 7개의 조건을 선택하여 수행하였으며 각각의 조건은 단일 조건(방사율 42%) 및 2단계(4처리) 및 3단계(2처리) 방사율 변화를 유도하였다. 기기내의 기류의 속도는 60m/s로 고정하였고 건조시간은 30, 60 및 90분으로 변화를 주었다. 평균 건물함량은 82.84%로 나타났으며 1번 및 3번 건조조건에서는 수분함량이 각각 59.94 및 76.91%로 나타나 건초에는 적합하지 않았다. 건조율에 있어서는 5번, 6번 및 7번 처리구에서 80% 이상으로 유의적으로 높게 나타났으며 전력 소비량은 평균 5.7kw/h로 다소 높게 나타났다. 각각의 건조 조건에 따른 사료가치는 조단백질 함량은 건조시간이 길어질수록 높게 나타났으며 ADF, NDF, IVDMD 및 TDN 함량에 있어서는 처리간에 유의적인 차이를 보이지 않았다. RFV에 있어서는 단일 조건인 1번 처리구가 복합조건보다 유의적으로 낮게 나타났다. 이상의 결과를 통하여 건조속도, 전력량, 품질 등을 고려할 때 4번 및 5번 건조조건이 가장 유리한 것으로 판단되었다.

디자인의 형태와 기능에 관한 연구 (Essay on Form and Function Design)

  • 이재국
    • 디자인학연구
    • /
    • 제2권1호
    • /
    • pp.63-97
    • /
    • 1989
  • There is nothing more important than the form and function in design, because every design product can be done on the basis of them. Form and Function are already existed before the word of design has been appeared and all the natural and man-made things' basic organization is based on their organic relations. The organic relations is the source of vitality which identifies the subsistance of all the objects and the evolution of living creatures has been changed their appearances by the natural law and order. Design is no exception. Design is a man-made organic thing which is developed its own way according to the purposed aim and given situations. If so, what is the ultimate goal of design. It is without saying that the goal is to make every effort to contribute to the -human beings most desirable life by the designer who is devoting himself to their convenience and well-being. Therefore, the designer can be called the man of rich life practitioner. This word implies a lot of meanings since the essence of design is improving the guality of life by the man-made things which are created by the designer. Also, the things are existed through the relations between form and function, and the things can keep their value when they are answered to the right purpose. In design, thus, it is to be a main concern how to create valuable things and to use them in the right way, and the subject of study is focused on the designer's outlook of value and uk relations between form and function. Christopher Alexander mentioned the importance of form as follows. The ultimate object of design is form. Every design problem begins with an effort to achieve fittness between the form and its context. The form is the solution to the problem: the context defmes the problem. In other words, when we speak of design, the real object of discussion is not form alone, but the ensemble comprising the form and its context. Good fit is a desirable property of this ensemble which relates to some particular division of the ensemble into form and context. Max Bill mainatined how important form is in design. Form represents a self-contained concept, and its embodiment in an object results in that object becoming a work of art. Futhermore, this explains why we use form so freguently in a comparative sense for determining whether one thing is less or more beautiful than another, and why the ideal of absolute beauty is always the standard by which we appraise form, and through form, art itself. Hence form has became synonymous with beauty. On the other hand, Laszlo Moholy-Nagy stated the importance of function as follows. Function means the task an object is designed to fulfill the task instrument is shaping the form. Unfortunately, this principle was not appreciated at the same time but through the endeavors of Frank Lloyd Wright and of the Bauhaus group and its many collegues in Europe, the idea of functionalism became the keynote of the twenites. Functionalism soon became a cheap slogan, however, and its original meaning blurred. It is neccessary to reexamine it in the light of present circumstances. Charles William Eliot expressed his idea on the relations between function and beauty. Beauty often results chiefly from fittness: indeed it is easy to manitain that nothing is fair except what is fit its uses or functions. If the function of the product of a machine be useful and valuable, an the machine be eminently fit for its function, it conspicuously has the beauty of fittness. A locomotive or a steamship has the same sort of beauty, derived from the supreme fittness for its function. As functions vary, so will those beauty..vary. However, it is impossible to study form and function in separate beings. Function can't be existed without form, and without function, form is nothing. In other words, form is a function's container, and function is content in form. It can be said that, therefore, the form and function are indispensable and commensal individuals which have coetemal relations. From the different point of view, sometimes, one is more emphasized than the other, but in this case, the logic is only accepted on the assumption of recognizing the importance of the other's entity. The fact can be proved what Frank Hoyd wright said that form and function are one. In spite of that, the form and function should be considered as independent indivisuals, because they are too important to be treated just as the simple single one. Form and function have flexible properties to the context. In other words, the context plays a role as the barometer to define the form and function, also which implies every meaning of surroun'||'&'||'not;dings. Thus, design is formed under the influence of situations. Situations are dynamic, like the design process itself, in which fixed focus can be cripping. Moreover, situations control over making the good design. Judging from the respect, I defined the good design in my thesis An Analytic Research on Desigh Ethic, "good design is to solve the problem by the most proper way in the situations." Situations are changeable, and so is design. There is no progress without change, but change is not neccessarily progress. It is highly desirable that there changes be beneficial to mankind. Our main problem is to be able to discriminate between that which should be discarded and that which should be kept, built upon, and improved. Form and Function are no exception. The practical function gives birth to the inevitable form and the $$\mu$ti-classified function is delivered to the varieties of form. All of these are depended upon changeable situations. That is precisely the situations of "situation de'||'&'||'not;sign", the concept of moving from the design of things to the design of the circumstances in which things are used. From this point of view, the core of form and function is depended upon how the designer can manage it efficiently in given situations. That is to say that the creativity designer plays an important role to fulfill the purpose. Generally speaking, creativity is the organization of a concept in response to a human need-a solution that is both satisfying and innovative. In order to meet human needs, creative design activities require a special intuitive insight which is set into motion by purposeful imagination. Therefore, creativity is the most essential quality of every designer. In addition, designers share with other creative people a compulsive ingenuity and a passion for imaginative solutions which will meet their criteria for excellence. Ultimately, it is said that the form and function is the matter which belongs to the desire of creative designers who constantly try to bring new thing into being to create new things. In accordance with that the main puppose of this thesis is to catch every meaning of the form and function and to close analyze their relations for the promotion of understanding and devising practical application to gradual progression in design. The thesis is composed of four parts: Introduction, Form, Function and Conclusion. Introduction, the purpose and background of the research are presented. In Chapter I, orgin of form, perception of form, and classification of form are studied. In Chapter II, generation of function, development of function, and diversification of function are considered. Conclusion, some concluding words are mentioned.ioned.

  • PDF

감정예측모형의 성과개선을 위한 Support Vector Regression 응용 (Application of Support Vector Regression for Improving the Performance of the Emotion Prediction Model)

  • 김성진;유은정;정민규;김재경;안현철
    • 지능정보연구
    • /
    • 제18권3호
    • /
    • pp.185-202
    • /
    • 2012
  • 오늘날 정보사회에서는 정보에 대한 가치를 인식하고, 이를 위한 정보의 활용과 수집이 중요해지고 있다. 얼굴 표정은 그림 하나가 수천개의 단어를 표현할 수 있듯이 수천 개의 정보를 지니고 있다. 이에 주목하여 최근 얼굴 표정을 통해 사람의 감정을 판단하여 지능형 서비스를 제공하기 위한 시도가 MIT Media Lab을 필두로 활발하게 이루어지고 있다. 전통적으로 기존 연구에서는 인공신경망, 중회귀분석 등의 기법을 통해 사람의 감정을 판단하는 연구가 이루어져 왔다. 하지만 중회귀모형은 예측 정확도가 떨어지고, 인공신경망은 성능은 뛰어나지만 기법 자체가 지닌 과적합화 문제로 인해 한계를 지닌다. 본 연구는 사람들의 자극에 대한 반응으로서 나타나는 얼굴 표정을 통해 감정을 추론해내는 지능형 모형을 개발하는 것을 목표로 한다. 기존 얼굴 표정을 통한 지능형 감정판단모형을 개선하기 위하여, Support Vector Regression(이하 SVR) 기법을 적용하는 새로운 모형을 제시한다. SVR은 기존 Support Vector Machine이 가진 뛰어난 예측 능력을 바탕으로, 회귀문제 영역을 해결하기 위해 확장된 것이다. 본 연구의 제안 모형의 목적은 사람의 얼굴 표정으로부터 쾌/불쾌 수준 그리고 몰입도를 판단할 수 있도록 설계되는 것이다. 모형 구축을 위해 사람들에게 적절한 자극영상을 제공했을 때 나타나는 얼굴 반응들을 수집했고, 이를 기반으로 얼굴 특징점을 도출 및 보정하였다. 이후 전처리 과정을 통해 통계적 유의변수를 추출 후 학습용과 검증용 데이터로 구분하여 SVR 모형을 통해 학습시키고, 평가되도록 하였다. 다수의 일반인들을 대상으로 수집된 실제 데이터셋을 기반으로 제안모형을 적용해 본 결과, 매우 우수한 예측 정확도를 보임을 확인할 수 있었다. 아울러, 중회귀분석이나 인공신경망 기법과 비교했을 때에도 본 연구에서 제안한 SVR 모형이 쾌/불쾌 수준 및 몰입도 모두에서 더 우수한 예측성과를 보임을 확인할 수 있었다. 이는 얼굴 표정에 기반한 감정판단모형으로서 SVR이 상당히 효과적인 수단이 될 수 있다는 점을 알 수 있었다.

개량 Mulching 담배밭 부근뽕잎이 춘잠작에 미치는 영향에 관한 연구 (Study on Spring Cocoon Crops with the Leaf Produced in the Mulberry Field close to the Totacco Field)

  • 이상풍;김정배;김계명;박광준
    • 한국잠사곤충학회지
    • /
    • 제16권1호
    • /
    • pp.67-75
    • /
    • 1974
  • 개량 Mulching 재배법에 의한 조기재배담배밭부근 뽕잎이 춘잠작에 미치는 영향을 알고져, 담배밭으로부터 뽕밭이 서북쪽에 위치하고, 경사도는 20%미만으로 뽕밭이 높게 위치하였으며, 시험기간중의 풍향은 담배밭을 거쳐 뽕밭쪽으로 불어오는 남풍과 동남풍이 각각 36%로 주풍이었고 동풍이 그 다음으로 18%의 상태인, 담배밭으로부터 l00m떨어진 처리구를 대조로 하고 10m, 25m, 50m, 80m별로 시험구를 설정하여 각처리의 뽕으로 누에 사육을 통한 영향여부를 조사한 결과, 시험사육기간중 육만으로 식별할 수 있을정도의 중독잠 내지 폐사잠은 발견할 수 없었으나 그 결과에 나타난 피해상황은 다음과 같다. 다만, 같은 뽕밭의 뽕이라도 경사도가 낮고, 담배밭에 가까운 곳일수록 뽕나무의 발육이 양호하였고, 엽질면에서도 우량한 뽕잎의 사육결과 였음에도 불구하고, 본 시험결과에 대한 분석결과를 요약하면 다음과 같다. 1. 5영극도 잠종중에는 담배밭으로부터 25m구까지 감초의 영향을 미쳤다. 2. 생견 1ι과수 역시 담배밭으로 부터 25m 구까지는 고치가 작았다. 3. 전견종과 견층종에서도 담배밭으로 부터 25m 구까지 피해를 주었으며 그 정도는 전견중보다 견층중에 더큰 영향이 미치어서 그 결과 견층비율이 일충 낮아지는 경향을 보였다. 4. 옥견포함 1만두 수견량에서도 담배밭에서 25m 구까지는 수량이 감소되고 있으며 그 정도는 1차 시험에 있어서는 처리구는 대조에 비하여 10m 구에서는 2.4kg, 25m 구는 2.5kg의 차이로 대조보다 19%가 감수되었으며, 2차에서는 10m 구는 1.8kg, 25m 구는 1.5kg의 차이로 각각 11%, 9%의 감수를 보였다. 이상을 종합하여 보면 대조구의 뽕의 질이 좋지 못하였던 점을 감안한다면 본 시험에서 얻어진 거리 및 감량이상의 피해를 받을 가능성을 시사하며, 본 시험에서의 피해한계 거리는 25m∼50m사이에 있는 것 같다. 그 피해증상은 포장에서 발생되는 증상과 동일하였다. 10. 석회의 시용은 시용량이 증가할 수록 발아불량현상을 다소 높게하는 경향이 있었다. 이상의 결과를 종합하여 볼때 뽕나무의 발아불량현상은 붕소의 결핍에 기인되나 붕소의 결핍피해정도는 토양모재, 토양내 유기물함량 및 수분함량 그리고 석회시용등에 의해서도 좌우되는 것으로 인정된다. 11. 발아불량현상은 붕사를 10a 당 6∼9kg을 춘, 하2회분시하면 방제할 수 있으며, 10a당2,000kg의 퇴비를 수년간 계속시용하는 방법도 상당한 방제방과를 얻을 수 있다고 믿어진다.. 14. 4항 및 5항의 시험결과 견층 sericin 변성에 가장 크게 영향을 미치는 제사용수의 성분은 pH, M-알카리도, 산도 및 총경처이므로 앞으로 이상의 4개 항목을 기본으로 한 제사시험을 행하고 이 결과에 따라 최적의 제사용수 수질 조건을 설정코저 한다. 15. 동일 시수를 가지고 견층을 반복처리 하는데 따라 시수내의 완충력이 증가하여 견층 sericin의 용해량은 감소하는 경향이 있었다.견층 sericin의 용해량은 감소하는 경향이 있었다.된다.esion also improved. The best results were shown when reeling velocity was 180-220 r.p.m. But when the velocity was increased more than 220 r.p.m., the results of cohesion got worse more or less. D) When the temperature of the drying pipe in reeling machine was raised, the results of cohesion also showed a tendency to improve. 4. Re-reeling A) We could net reach a conclusion as to have correlation

  • PDF

탈곡기의 제작동요인이 벼의생탈곡성능에 미치는 영향 (Factors Affecting Wet-Paddy Threshing Performance)

  • 남상일;정창주;류관희
    • Journal of Biosystems Engineering
    • /
    • 제5권1호
    • /
    • pp.1-14
    • /
    • 1980
  • Threshing operation may be one of the most important processes in the paddy post-production system as far as the grain loss and labor requirement are concerned . head-feeding type threshers commercially available now in Korea originally were developed for threshing dry paddy in the range of 15 to 17 % in wet basis. However, threshing wet-paddy with the grain moisture content above 20 % has been strongly recommended, especially for new high-yielding Indica -type varieties ; (1) to reduce high grain loss incurred due to the handling operations, and (2) to prevent the quantitative and qualitative loss of milled -rice when unthreshed grains are rewetted due to the rainfall. The objective of this study were to investigate the adaptability of both a head-feeding type thresher and a throw-in type thresher to wet-paddy , and to find out the possiblilities of improving the components of these threshers threshing. Four varieties, Suweon 264 and Milyang 24 as Tongil sister line varieties, minehikari and Jinhueng as Japonica-type varieties, were used at the different levels of the moisture content of grains. Both the feed rate and the cylinder speed were varied for each material and each machine. The thresher output quality , composition of tailing return, and separating loss were analyzed from the sampels taken at each treatment. A separate experiment for measurement opf the power requirement of the head-feeding type thresher was also performed. The results are summarized as follows : 1. There was a difference in the thresher output quality between rice varieties. In case of wet-paddy threshing at 550 rpm , grains with branchlet and torn heads for the Suweon 264 were 12 % and 7 % of the total output in weight, respectively, and for the Minehikari 4.5 % and 2 % respectively. In case of dry paddy threshing , those for the Suweon 264 were 8 % and 5% , and for the Minehikari 4% and 1% respectively. However, those for the Milyang 23 , which is highly susceptable to shattering, were much lower with 1 % and 0.5% respectively, regardless of the moisture content of the paddy. Therefore, it is desirable to breed rice varieties of the same physical properties as well as to improve a thresher adaptable to all the varieties. Torn heads, which increased with the moisture content of rall the varieties except the Milyang 23 , decreased as the cylinder speed increased, but grains with branchlet didnt decrease. The damaged kernels increased with the cylinder speed. 3. The thresher output quality was not affected much by the feed rate. But grains with branchlet and torn heads increased slightly with the feed rate for the head-feeding type thresher since higher resistance lowered at the cylinder speed. 4. In order to reduce grains with branchlet and torn heads in wet-paddy threshing , it is desirable to improve the head-feeding type thresher by developing a new type of cylinder which to not give excess impact on kernels or a concave which has differenct sizes of holes at different locations along the cylinder. 5. For the head-feeding type thresher, there was a difference in separating loss between the varieties. At the cylinder speed of 600 rpm the separating losses for the Minehikari and the Suweon 264 were 1.2% and 0.6% respectively. The separating loss of the head-feeding type thresher was not affected by the moisture content of paddy while that of the Mini-aged thresher increased with the moisture content. 6. From the analysis of the tailings return , to appeared that the tailings return mechanism didn't function properly because lots of single grains and rubbishes were unnecessarily returned. 7. Adding a vibrating sieve to the head-feeding type thresher could increase the efficiency of separation. Consequently , the tailing return mechanism would function properly since unnecessary return could be educed greatly. 8. The power required for the head-feeding type thresher was not affected by the moisture content of paddy, but the average power increased linearly with the feed rate. The power also increased with the cylinder speed.

  • PDF

Progress of Composite Fabrication Technologies with the Use of Machinery

  • Choi, Byung-Keun;Kim, Yun-Hae;Ha, Jin-Cheol;Lee, Jin-Woo;Park, Jun-Mu;Park, Soo-Jeong;Moon, Kyung-Man;Chung, Won-Jee;Kim, Man-Soo
    • International Journal of Ocean System Engineering
    • /
    • 제2권3호
    • /
    • pp.185-194
    • /
    • 2012
  • A Macroscopic combination of two or more distinct materials is commonly referred to as a "Composite Material", having been designed mechanically and chemically superior in function and characteristic than its individual constituent materials. Composite materials are used not only for aerospace and military, but also heavily used in boat/ship building and general composite industries which we are seeing increasingly more. Regardless of the various applications for composite materials, the industry is still limited and requires better fabrication technology and methodology in order to expand and grow. An example of this is that the majority of fabrication facilities nearby still use an antiquated wet lay-up process where fabrication still requires manual hand labor in a 3D environment impeding productivity of composite product design advancement. As an expert in the advanced composites field, I have developed fabrication skills with the use of machinery based on my past composite experience. In autumn 2011, the Korea government confirmed to fund my project. It is the development of a composite sanding machine. I began development of this semi-robotic prototype beginning in 2009. It has possibilities of replacing or augmenting the exhaustive and difficult jobs performed by human hands, such as sanding, grinding, blasting, and polishing in most often, very awkward conditions, and is also will boost productivity, improve surface quality, cut abrasive costs, eliminate vibration injuries, and protect workers from exposure to dust and airborne contamination. Ease of control and operation of the equipment in or outside of the sanding room is a key benefit to end-users. It will prove to be much more economical than normal robotics and minimize errors that commonly occur in factories. The key components and their technologies are a 360 degree rotational shoulder and a wrist that is controlled under PLC controller and joystick manual mode. Development on both of the key modules is complete and are now operational. The Korean government fund boosted my development and I expect to complete full scale development no later than 3rd quarter 2012. Even with the advantages of composite materials, there is still the need to repair or to maintain composite products with a higher level of technology. I have learned many composite repair skills on composite airframe since many composite fabrication skills including repair, requires training for non aerospace applications. The wind energy market is now requiring much larger blades in order to generate more electrical energy for wind farms. One single blade is commonly 50 meters or longer now. When a wind blade becomes damaged from external forces, on-site repair is required on the columns even under strong wind and freezing temperature conditions. In order to correctly obtain polymerization, the repair must be performed on the damaged area within a very limited time. The use of pre-impregnated glass fabric and heating silicone pad and a hot bonder acting precise heating control are surely required.

LSTM 모형과 로지스틱 회귀를 통한 도시 침수 범위의 예측 (Prediction of Urban Flood Extent by LSTM Model and Logistic Regression)

  • 김현일;한건연;이재영
    • 대한토목학회논문집
    • /
    • 제40권3호
    • /
    • pp.273-283
    • /
    • 2020
  • 기후변화의 영향으로 국지성 및 집중호우에 대한 발생 가능성이 높아지는 시점에서 과거에 침수피해를 입은 도시 유역에 대하여 실제 호우에 대한 침수 양상을 예측하는 것은 중요하다. 이에 수치해석 기반 프로그램과 함께 기계학습을 이용한 홍수 분석에 대한 연구가 증가하고 있다. 본 연구에서 적용한 LSTM 신경망은 일련의 자료를 분석하는데 유용하지만, 딥 러닝을 수행하기 위하여 충분한 양의 자료를 필요로 한다. 그러나 단일 도시유역에 홍수를 일으킬 강우가 매년 일어나지 않기에 많은 홍수 자료를 수집하기에는 어려움이 있다. 이에 본 연구에서는 대상 유역에서 관측되는 강우 외에 전국 단위의 실제 호우를 예측 모형에 반영하였다. LSTM (Long Short-Term Memory) 신경망은 강우에 대한 총 월류량을 예측하기 위하여 사용되었으며, 목표값으로 SWMM (Storm Water Management Model)의 유출 모의 결과를 사용하였다. 침수 범위 예측을 위해서는 로지스틱 회귀를 사용하였으며, 로지스틱 회귀 모형의 독립 변수는 총 월류량이며 종속 변수는 격자 별 침수 발생 유무이다. 침수 범위 자료는 SWMM의 유출 결과를 바탕으로 수행된 2차원 침수해석 모의 결과를 통해 수집하였다. LSTM의 매개변수 조건에 따라 총 월류량 예측 결과를 비교하였다. 매개변수 설정에 따른 4가지의 LSTM 모형을 사용하였는데, 검증과 테스트 단계에 대한 평균 RMSE (Root Mean Square Error)는 1.4279 ㎥/s, 1.0079 ㎥/s으로 산정되었다. 최소 RMSE는 검증과 테스트에 대하여 각각 1.1656 ㎥/s, 0.8797㎥/s 으로 산정되었으며, SWMM모의 결과를 적절히 재현할 수 있음을 확인하였다. LSTM 신경망의 결과와 로지스틱 회귀를 연계하여 침수 범위 예측을 수행하였으며, 침수심 0.5m 이상을 고려하였을 때에 최대 침수면적 적합도가 97.33 %으로 나타났다. 본 연구에서 제시된 방법론은 딥 러닝에 기반하여 도시 홍수 대응능력을 향상 시키는데 도움이 될 것으로 판단된다.

가정용수의 용도별 사용량 조사 및 원단위 분석 (End-use analysis of household water by metering)

  • 김화수;이두진;김주환;김정현;정관수
    • 한국수자원학회:학술대회논문집
    • /
    • 한국수자원학회 2008년도 학술발표회 논문집
    • /
    • pp.869-877
    • /
    • 2008
  • 본 연구에서는 전국 140여개 가구를 대상으로 조사된 가정용수의 각 용도별 사용량 자료를 바탕으로 가정용수의 용도별 사용량을 도출함으로써 상, 하수도시설설계에 활용할 수 있는 원단위를 제시하고, 또한 용도별 사용특성분석, 영향인자 평가 등을 통하여 가정용수의 변동특성을 이해하고 향후 사용경향을 예측할 수 있는 정보를 제공하고자 하였다. 가정용수의 총사용량 기준 원단위는 $165.8{\ell}pcd$였으며, 각 용도별 사용량은 세면용수 $15.4{\ell}pcd$(10%), 욕조용수 $24.7{\ell}pcd$(16%), 싱크대용수 $29.7{\ell}pcd$(19%), 세탁기용수 $30.8{\ell}pcd$(20%), 변기용수 $38.5{\ell}pcd$(25%), 기타용수 $13.5{\ell}pcd$(9%)로 나타났다. 가정용수 중에서 변기용수의 사용량이 가장 많은 것으로 나타났으며, 베란다, 정원용수 등이 포함된 기타용수의 경우 사용빈도가 일정하지 않고 사용량의 편차도 심하여 변동계수와 표준편차가 가장 크게 나타났다. 가정용수의 용도별 사용량을 미국, 영국 가정과 비교한 결과, 기타용수와 실외용수를 제외하고는 미국의 실내용수 사용량과 비율이 우리나라와 매우 유사한 특성을 보였다. 가정에서 물사용에 기초한 생활양식이 미국과 유사하게 변화되고 있음을 간접적으로 보여준 결과이다. 또한 1985년에 서울에서 조사된 용도별 사용량과 금번결과를 비교한 결과, 목욕, 변기, 세탁, 취사용수의 총량은 $23{\ell}$가 증가하였으며, 특히 세면과 욕조용수를 합산한 목욕용수가 $27{\ell}$에서 $40{\ell}$로 크게 늘어났고, 세탁용수도 $17{\ell}$나 늘어났다. 생활양식이 서구화되면서 가정에서의 목욕, 사워문화가 점차 확산되고 대용량 세탁기의 보급이 늘어난 것 등이 영향을 미쳤을 것으로 추측되었다.

  • PDF

치기공과 학생들의 실습 중 안전에 대한 안전교육 요구도 특성 (Safety education needs among the dental technology-major college students to prevent injuries in their laboratory classes)

  • 박종희
    • 대한치과기공학회지
    • /
    • 제28권1호
    • /
    • pp.177-198
    • /
    • 2006
  • This study purposed to offer basic data for safety education of the dental laboratory technology after the investigation of how much the students in the dept. of dental laboratory technology are aware of the danger of each instrument, equipment or laboratory procedure that they use during laboratory and how much they demand safety education for this. The objects for this study were 423 students who were in the dept. of dental laboratory technology. In this regard, four colleges which have the dept. of dental laboratory technology were randomly selected to do a questionnaire survey. SPSS 12.0 was used to analyze the collected data. The results were as follows: As for satisfaction with their major, the respondents answered Satisfied (59.1%), Average (35.5%) and Dissatisfied (5.4%). In terms of the production process of a partial denture, they considered casting, polishing the casting body, polishing denture and burn out were most dangerous in order. As for the production process of a full denture, what they regarded as the most dangerous in order was polishing denture, deflasking and wax wash. Regarding the laboratory procedures of porcelain material, casting, trimming casting body, polishing porcelain material and burn out were the most dangerous procedures that they perceived. With regard to materials for use, alcohol, polishing, metal and wire were the most dangerous ones they thought. As for the handling characteristics of each material, small towns showed a higher demand for safety of the handling characteristics of alcohol. In terms of school year and sex, juniors and girls had higher scores in the demand for safety of the handling characteristics of acid. Regarding the handling characteristics of each equipment and instrument, all of small towns, juniors and girls showed the highest demand for safety of the handling characteristics of alcohol lamps. With regard to scores in the demand for safety of other characteristics, all of small towns, juniors and girls had the highest demand for safety of emergency treatment. Concerning the demand for safety education by the completion of safety education, in terms of each material, highest was the demand for safety of acid from the group which completed safety education. In regard to equipments and instruments, when it came to the demand for safety of the handling characteristics of casting machine, the educated group's demand for safety of acid was higher. Regarding other characteristics, the group which was not educated gained higher scores in the demand for safety of emergency treatment. 11. In all areas(materials, machines and others), small towns, girls and juniors showed higher scores in the demand for safety. Based on the above results, it was found that when students conduct the laboratory of dental technology, they would think that many materials, instruments or equipments for use are very dangerous. However, safety education was not fully given to them. Regarding the scores in the damned for safety education, the highest was 4.16 and the lowest was 3.43, which suggests that the scores were generally very high. In this regard, it is necessary to continue delivering a systematic safety education of materials, equipments or instruments used during the laboratory of dental technology. Therefore, through the analysis of each material, instruments or facility used in every laboratory and each process, safety accident types and accident risk factors should be investigated to develop educational materials for this. Moreover, it is required to open safety education as a single course of study or insert safety contents of all materials and machines into the class of dental laboratory instrument or dental materials for the purpose of a systematic and thorough safety education to prevent a safety accident during laboratory.

  • PDF

ACCase 및 ALS 저해 제초제들에 대한 저항성 강피의 반응과 대체약제들의 효과 (Response of the Resistant Biotype of Echinochloa oryzoides to ACCase and ALS inhibitors, and Effect of Alternative Herbicides)

  • 박태선;구본일;강신구;최민규;박홍규;이경보;고재권
    • 한국잡초학회지
    • /
    • 제30권3호
    • /
    • pp.291-299
    • /
    • 2010
  • ACCase 저해해제인 cyhalofop-butyl과 ALS 저해제인 penoxsulam은 한국의 직파재배 논에서 수년 동안 경엽 처리용으로 사용되어지고 있다. 그러나 2009년 이후 익산, 김제, 부안에서 이들 제초제를 사용한 벼 직파재배 논에서 강피 약효에 대한 민원이 증가하고 있다. ACCase 및 ALS 저해제 저항성으로 추정되는 강피를 3개 지역에서 수집하여 온실조건에서 cyhalofop-butyl과 penoxsulam에 대한 저항성 정도를 검증하였다. 익산과 김제의 수집종은 cyhalofopbutyl과 penoxsulam의 추천량에서 완전 생존하였으며, 부안 수집종은 약 60% 생존하였다. 온실조건에서 화본과 잡초인 피를 방제를 위한 ACCase 및 ALS 저해제들이 혼합된 제초제들을 강피 3.5엽기에 처리한 결과 무처리 대비 생존율은 80% 이상으로 나타났다. 파종 및 이앙전 처리제들인 oxadiazon EC, pyrazolate SC, pretilachlor EC, benzobicyclon+thiobencarb SE들은 강피 0.5엽기에서 효과적이었으며, benzobicyclon+fentrazamide+bensulfuron SC, benzobicyclon+ mefenacet+bensulfuron SC 그리고 benzobicyclone+cafenstrole+pyrazosulfuron-ethyl GR은 강피 2엽기까지 효과적으로 방제하였다. 포장실험에서 benzobicyclon+fentrazamide+bensulfuronSC과 benzobicyclon+mefenacet+bensulfuron SC의 단일처리에서는 저항성 강피의 방제에 실패하였으나, benzobicyclon+thiobencarb SE와 benzobicyclon+mefenacet+bensulfuron SC의 체계처리는 강피를 효과적으로 방제하였다. 따라서 강피의 익산, 김제 수집종은 cyhalofopbutyl과 penoxsulam애 대하여 강한 저항성을 보였으나, 작용기작이 다른 cafenstrole, fentrazamide, mefenacet에 의해 2엽기 이내에는 효과적으로 방제되었다.