• Korean Journal of Materials Research
• /
• v.16 no.3
• /
• pp.178-182
• /
• 2006

A single electro-discharge-sintering (EDS) pulse (1.0 kJ/0.7 g), from a $300{\mu}F$ capacitor, was applied to atomized spherical Ti-6Al-4V powder in a low vacuum to produce porous-surfaced implant compacts. A solid core surrounded by a porous layer was formed by a discharge in the middle of the compact. XPS (X-ray photoelectron spectroscopy) was used to study the surface characteristics of the implant material. C, O, and Ti were the main constituents, with smaller amounts of Al, V, and N. The implant surface was lightly oxidized and was primarily in the form of $TiO_2$ with a small amount of metallic Ti. A lightly etched EDS implant sample showed the surface form of metallic Ti, indicating that EDS breaks down the oxide film of the as-received Ti-6Al-4V powder during the discharge process. The EDS Ti-6Al-4V implant surface also contained small amounts of aluminum oxide in addition to $TiO_2$. However, V detected in the EDS Ti-6Al-4V implant surface, did not contribute to the formation of the oxide film..

• Journal of KIISE:Computer Systems and Theory
• /
• v.30 no.3_4
• /
• pp.149-159
• /
• 2003

The need for information security increases interests on cipher algorithms recently. Especially, a large volume of data transmission over high-band communication network requires faster encryption and decryption techniques for real-time processing. It would be a good solution for this problem that we implement the cipher algorithm in forms of hardware circuits. Though some previous researches use this approach, they focus only on repeatedly executing the core part of the algorithm to minimize the hardware chip size, while most cipher algorithms are inherently parallel. In this paper, we propose a new design for the SEED block cipher algorithm developed by KISA (Korea Information Security Agency) in 1998 as Korean standard cipher algorithm. It exploits the parallelism of the algorithm basically and implements it in a pipelined fashion. We described the design in VHDL program and performed functional simulations on the program, and then found that it worked correctly. In addition, we synthesized it and verified that it could be implemented in a single FPGA chip, implying that the new design can be Practically used for the actual hardware implementation of a high-speed and high-performance cipher system.

• Journal of Astronomy and Space Sciences
• /
• v.24 no.4
• /
• pp.397-408
• /
• 2007

Diplexer is one of core devices needed to communicate with satellite using single ground antenna by separating uplink and downlink signal. This paper presents the design of the S-band diplexer for LEO TT&C application, especially for KOMPSAT (KOrea Multi-Purpose SATellite). To cope with requirements such as high handling power, low insertion loss, air-cavity resonator with high quality factor was considered as one of design drivers. Design was started with predicting unloaded Q and equivalent circuit from the structure of air-cavity resonator. For the convenience of adjustment, the coupling factor placed between resonators was estimated from COTSEM (Electro-Magnetic) simulator, EESOF $ADS^{TM}$, and expressed with 2-order polynomial regression. To improve the isolation between transmitting part (Tx) and receiving part (Rx), the inductive and capacitive attenuation poles were inserted between $4^{th}\;and\;6^{th}$ resonator respectively. The fabricated diplexer consists of two bandpass filters and each filter has eight resonants. From the measurement, it was shown that major requirements such as 0.5dB of insertion loss, 20dB of return loss and 100dB of isolation were fully satisfied within passband.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.10
• /
• pp.798-803
• /
• 2010

This paper describes the characteristics of electromagnetic wave propagation in power transformer. A transformer which is similar to 154 kV single phase on-site transformer unit was provided for the purpose of the experiment. The 12 dielectric windows on the transformer enclosure to install UHF (ultra high frequency) sensors and the full scale mock ups of winding and the core were also equipped in the transformer. Every sensors to be installed to the transformer was tested and verified whether they show same characteristics or not before the experiment. A discharge gap which was used as a PD (partial discharge) source moved to several necessary locations in the transformer to simulate dielectric defects. Propagation times of electromagnetic wave signal from PD source to sensors decided by the routes of both reflection phenomenon and diffraction phenomenon were compared each other. The experimental results showed propagation route of the PD signal makes an effect on the frequency spectrum of front part of the signal and the magnitude of the signal and propagation time of the signal when the signal is captured on the sensor.

• Journal of the Korean Society for information Management
• /
• v.27 no.1
• /
• pp.79-102
• /
• 2010

In Korea, more than half of medical libraries are small.sized hospital libraries operated under the single.librarian system, and it is keenly required to establish collection management policies for exchanging resources with other libraries and maintaining consistency. however, it is rare to set up their collection management policies on the web among the domestic medical libraries. Thus, this study purposed to survey cases of collection management policies in domestic and foreign medical libraries and to provide basic information and ideas for Korean medical libraries that are preparing collection management policies. As long as core requirements are satisfied, collection management policies do not have a way. Thus, this case study is expected to provide useful ideas to medical libraries developing their collection management policies. For this purpose, we selected 12 survey items based on previous studies, and investigated one domestic and five foreign medical libraries, and analyzed collected data. Based on the results of analyzing the cases, we suggested 12 guidelines.

• Current Photovoltaic Research
• /
• v.8 no.1
• /
• pp.33-38
• /
• 2020

Single-phased SnS thin films have been prepared by RF magnetron sputtering at various deposition pressures. The effect of deposition pressure on the structural and optical properties of polycrystalline SnS thin films was studied using X-ray diffraction (XRD), field-emission scanning electron microscopy (FE-SEM), X-ray photoelectron spectroscopy (XPS) and ultraviolet-visible-near infrared (UV-Vis-NIR) spectrophotometer. The XRD analysis revealed the orthorhombic structure of the SnS thin films oriented along the (111) plane direction. As the deposition pressure was increased from 5 mTorr to 15 mTorr, the intensity of the peak on the (111) plane increased, and the intensity decreased under the condition of 20 mTorr. The binding energy difference at the Sn 3d_5/2 and S 2p_3/2 core levels was about 324.5 eV, indicating that the SnS thin film was prepared as a pure Sn-S phase. The optical properties of the SnS thin films indicate the presence of direct allowed transitions with corresponding energy band gap in the rang 1.47-1.57 eV.

• Bulletin of the Korean Space Science Society
• /
• 2008.10a
• /
• pp.37.2-37.2
• /
• 2008

Korea-Japan Joint VLBI Correlator (KJJVC), to be used for Korean VLBI Network (KVN) in Korea Astronomy & Space Science Institute (KASI), is a high-speed calculator that outputs the correlation results in the maximum speed of 1.4GB/sec.To receive and record this data keeping up with this speed and with no loss, the design of the software running on the data archive system for receving and recording the output data from the correlator is very important. But, the simple kind of programming using just single thread that receives data from network and records it by turns, can cause a bottleneck effect while processing high speed data and a probable data loss, and cannot utilize the merit of hardwares supporting multi core or hyper threading, or operating systems supporting these hardwares. In this talk we summarize the design of the data transfer software for KJJVC and high speed, large capacity data archive system using general socket programming and multi threading techniques, and the pre-BMT(Bench Marking Test) results from the tests of the storage product providers' proposals using this software.

• Journal of KIISE:Information Networking
• /
• v.36 no.2
• /
• pp.118-129
• /
• 2009

The ISO 18000-7 Active RFID standard, a single channel system operating in the 433Mhz, faces technical difficulties in supporting some recently introduced application demands because of its low transmission rates and radio interference between readers. We propose a new multi-channel active RFID system operating in the 2.4Ghz. The special feature of the proposed system is that a reader makes use of multiple interfaces to improve its performance like a multi-core processor. However if only a small part of interfaces are actually used, the performance improvement would not meet the expectation. To overcome this problem, a new multi-channel multi-interface active RFID protocol, which balances communication loads among all available interfaces, is necessary. 3 protocols, named as "Aggregated", "LP-Combined", "AP-Balanced", are proposed. Through simulation, we compare them for various conditions by changing number of tags, number of interfaces, tag data size. AP-Balanced shows the best performance and its performance increases almost linearly as the number of interface increases, which meets our expectation.

• Journal of the Korean Society for information Management
• /
• v.29 no.2
• /
• pp.155-171
• /
• 2012

In text categorization, core terms of an input document are hardly selected as classification features if they do not occur in a training document set. Besides, synonymous terms with the same concept are usually treated as different features. This study aims to improve text categorization performance by integrating synonyms into a single feature and by replacing input terms not in the training document set with the most similar term occurring in training documents using Wikipedia. For the selection of classification features, experiments were performed in various settings composed of three different conditions: the use of category information of non-training terms, the part of Wikipedia used for measuring term-term similarity, and the type of similarity measures. The categorization performance of a kNN classifier was improved by 0.35~1.85% in $F_1$ value in all the experimental settings when non-learning terms were replaced by the learning term with the highest similarity above the threshold value. Although the improvement ratio is not as high as expected, several semantic as well as structural devices of Wikipedia could be used for selecting more effective classification features.

• Knowledge Management Research
• /
• v.17 no.3
• /
• pp.181-206
• /
• 2016

Under the influence of growing popularity of "hallyu" (Korean wave), corporates that have copyrights such as music, movie, drama as their core competitiveness are showing continuing growth. In Addition, they built on contents are rapidly growing, interests in protection and management of intellectual property rights linked to contents are growing. Global contents development corporates are making great efforts to create profits out of copyrights. They could utilize original contents to strengthen brand value use it to produce additional contents in current market. Also they take advantage of existing storyline of the contents and strong brand to explore new markets. This paper looks into Value articulation model by Professor James Conley and analyzed the firms that utilized intellectual property rights to extend the period of protection, strengthen their competitiveness and succeeded in breaking into new market by using the rights they possess. Also, this paper examines the usage of intellectual property rights and business expansion strategy of of Iconix, the Korean entertainment company, which gained tremendous popularity in last ten years using this model. In Value articulation model, Conley classifies the process of exploiting the portfolio of the single product's(or service's) intellectual property right for a period of time into three stages ; value transference, value translation, value transportation. Pororo's strategy of utilizing intellectual property right is suggestive to domestic entertainment companies. Under the influence of hallyu" (Korean wave), domestic contents such as movies, dramas and music are enjoying the high level of popularity recently not to mention animations. In reality, Korean entertainment companies who have no background or experience of Intellectual property rights are not creating enough added values compared to fast growing market. It is believed Iconix's intellectual property rights management strategy will suggest positive aspects to domestic companies. Moreover, I hope various intellectual property rights management strategies including Conley's value articulation are studied and they can make contributions to managing domestic entertainment companies.