• Journal of the Korean Institute of Telematics and Electronics D
• /
• v.34D no.5
• /
• pp.22-31
• /
• 1997

We have measured the optical properties, thickness, and energy band gap of the P $b_{1-x}$/100/L $a_{x}$100/ $Ti_{1-}$0.25x/100/ $O_{3}$ (PLT(x)) thin film prepared by the sol-gel method with varying the La concentration, x, fyom 15 nto 33 mol%. We have obtained the values from the tranmission spectrum and employed the envelope method in anayzing the spectrum. We have also performed the simulation of the transmission spectrum on the PC (personal computer) to verify the accuracy of the values 15 to 33mol%, the refractive index (at .lambda.=632.8nm) increases from 2.39 to 2.44. The extinction coefficient does not depend on the la concentration but mainly on te wavelength, and has the values between 0.2 and 0.5 at the wavelength shorter than 330nm and between 0.001 and 0.008 at the wavelength longer than 700nm. The energy band gap of the PLT (x) thin film has been obtained on the assumption of the direct band-to-band transition. It decreases from 3.28 to 3.17eV as the La concentration increases from 15 to 33 mol%. The thickness of the PLT(x) thin film has been also obtained in high accuracy by the envelope method..

• Communications for Statistical Applications and Methods
• /
• v.19 no.5
• /
• pp.685-696
• /
• 2012

These days the interest of quality leads to the necessity of control charts for monitoring the process in various fields of practical applications. The $\overline{X}$ chart is one of the most widely used tools for quality control that also performs well under the normality of quality characteristics. However, quality characteristics tend to have nonnormal properties in real applications. Numerous recent studies have tried to find and explore the performance of $\overline{X}$ chart due to non-normality; however previous studies numerically examined the effects of non-normality and did not provide any theoretical justification. Moreover, numerical studies are restricted to specific type of distributions such as Burr or gamma distribution that are known to be flexible but can hardly replace other general distributions. In this paper, we approximate the false alarm rate(FAR) of the $\overline{X}$ chart using the Edgeworth expansion up to 1/n-order with the fourth cumulant. This allows us to examine the theoretical effects of nonnormality, as measured by the skewness and kurtosis, on $\overline{X}$ chart. In addition, we investigate the effect of skewness and kurtosis on $\overline{X}$ chart in numerical studies. We use a skewed-normal distribution with a skew parameter to comprehensively investigate the effect of skewness.

• Tunnel and Underground Space
• /
• v.29 no.6
• /
• pp.542-557
• /
• 2019

The behavior of rock mass is influenced by its microscopic feature of internal structure generating from forming and metamorphic process. This study investigated a new methodology for characterization of rock based on the X-ray CT (computed tomography) images reflecting the spatial distribution characteristics of internal constituent materials. The X-ray image based analysis is capable of quantification of heterogeneity and anisotropy of rock fabric, size distribution and shape parameter analysis of rock mineral grains, fluid flow simulation based on pore geometry image and roughness evaluation of unexposed joint surface which are hardly acquired by conventional rock testing methods.

• Journal of The Korean Astronomical Society
• /
• v.37 no.5
• /
• pp.593-596
• /
• 2004

We introduce a method of identifying evidence of shocks in the X-ray emitting gas in clusters of galaxies. Using information from synthetic observations of simulated clusters, we do a blind search of the synthetic image plane. The locations of likely shocks found using this method closely match those of shocks identified in the simulation hydrodynamic data. Though this method assumes nothing about the geometry of the shocks, the general distribution of shocks as a function of Mach number in the cluster hydrodynamic data can be extracted via this method. Characterization of the cluster shock distribution is critical to understanding production of cosmic rays in clusters and the use of shocks as dynamical tracers.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.17 no.3
• /
• pp.26-35
• /
• 1980

The degradation of image due to the finite size of sensing devices has been one of the problems in all digital imaging systems. The basic study on the improvement of the spatial resolution was carried out in both spatial and frequency domains by the resolution recovery techniques which have been used in optics. Here, the techniques were applied to CT (Computerized Tomography) system, and image with finer resolution was obtained by these techniques. The basic theory is described and the results of the simulation are shown.

• Journal of the Korean Data and Information Science Society
• /
• v.16 no.3
• /
• pp.665-682
• /
• 2005

The sample reuse bootstrap technique has been successful to attract both applied and theoretical statisticians since its origination. In recent years a good deal of attention has been focused on the applications of bootstrap methods in regression analysis. It is easier but more accurate computation methods heavily depend on high-speed computers and warrant tough mathematical justification for their validity. It is now evident that the presence of multiple unusual observations could make a great deal of damage to the inferential procedure. We suspect that bootstrap methods may not be free from this problem. We at first present few examples in favour of our suspicion and propose a new method diagnostic-before-bootstrap method for regression purpose. The usefulness of our newly proposed method is investigated through few well-known examples and a Monte Carlo simulation under a variety of error and leverage structures.

• Journal of Korean Society on Water Environment
• /
• v.23 no.3
• /
• pp.367-370
• /
• 2007

Numerous sets of simulation were conducted in order to find out the optimum operational conditions of the existing BNR process using GPS-X program. The model of ASM3 and modified Bio-P module were applied for simulations. From the result of this study, effluent quality was closely related with the step feeding rate and influent C/N ratio. The effluent TN concentration seemed to be significantly affected by step feeding rate at the low C/N condition. But at the high C/N condition, the effluent concentration of TP rather than that of TN was affected by the control of step feeding rate.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.61 no.10
• /
• pp.1489-1495
• /
• 2012

In this study, the active noise control experiment has been performed using induction motor noises. While the noises were measured, a induction motor was operated in different speed. For the simulation of ANC(Active Noise Control), test-bed is composed a multi-channel ANC system was constructed. In order to compare the control performance, we performed noise reduction simulations of ANC by Co-FXLMS algorithm and FXLMS algorithm. Through the simulation results, we confirmed that convergence performance and noise decrease effect of the proposed Co-FXLMS algorithm have been improved from existing FXLMS algorithm.

• Journal of the Korean Statistical Society
• /
• v.27 no.4
• /
• pp.421-433
• /
• 1998

In this paper, matching priors for P(X < Y) are investigated when both distributions are exponential distributions. Two recent approaches for finding noninformative priors are introduced. The first one is the verger and Bernardo's forward and backward reference priors that maximizes the expected Kullback-Liebler Divergence between posterior and prior density. The second one is the matching prior identified by matching the one sided posterior credible interval with the frequentist's desired confidence level. The general forms of the second- order matching prior are presented so that the one sided posterior credible intervals agree with the frequentist's desired confidence levels up to O(n$^{-1}$ ). The frequentist coverage probabilities of confidence sets based on several noninformative priors are compared for small sample sizes via the Monte-Carlo simulation.

• Journal of the Korea Society for Simulation
• /
• v.4 no.1
• /
• pp.37-44
• /
• 1995

본 논문은 가상현실 어플리케이션을 제작하기 위한 가상세계 저작도구인 VRAT(Virtual Reality Authoring Tool)의 설계 및 구현에 대해 기술한다. VRAT는 3D desktop, immersive, reflexive metaphor를 지원하며 실시간 3D 센서 시스템과 폴리곤 렌더링 시스템을 기반으로 객체 지향적인 가상현실 운영시스템, 가상세계 데이터베이스, GUI를 통한 저작시스템으로 구성된다. 이들 하부 시스템은 완전히 결합되어 있어서 VRAT시스템을 사용한 응용프로그램의 수행중에 기존의 3D CAD 시스템등에서 제작한 모델을 가상세계내에 배치하고 이들에 행위양식을 부여하는 태스크를 지정하거나 입력장치인 센서를 모델이나 시점에 연결하여 조종하는 것이 가능하다. 제안된 시스템은 범용성과 이식성을 고려하여 UNIX와 X-Window 시스템을 기반으로 X11, GL, PIXRECT, VGA 그래픽 하부 시스템과 SGI, SUN, HP 등의 워크스테이션과 PC 상에서 구현되었다.