• Computers and Concrete
• /
• 제15권5호
• /
• pp.847-864
• /
• 2015

In this paper, a reaction-diffusion model of carbonation process in self-compacting concrete (SCC) was realized with a consideration of multi-field couplings. Various effects from environmental conditions, e.g. ambient temperature, relative humidity, carbonation reaction, were incorporated into a numerical simulation proposed by ANSYS. In addition, the carbonation process of SCC was experimentally investigated and compared with a conventionally vibrated concrete (CVC). It is found that SCC has a higher carbonation resistance than CVC with a comparable compressive strength. The numerical solution analysis agrees well with the test results, indicating that the proposed model is appropriate to calculate and predict the carbonation process in SCC. The parameters sensitivity analysis also shows that the carbon dioxide diffusion coefficient and moisture field are essentially crucial to the carbonation process in SCC.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2008년도 하계종합학술대회
• /
• pp.527-528
• /
• 2008

In this paper, several cases of multi-shared bus architecture are discussed and in order to decrease the bridge latency, the architecture introducing a memory decoder is proposed. Finally, a LCD controller using DMA master is integrated in this bus architecture that is verified due to RTL simulation and FPGA board test. DMA, LCD line buffer and SDRAM controller are normally operated in the timing simulation using ModelSim tool, and the LCD image is confirmed in the real FPGA board containing LCD panel.

• KIEAE Journal
• /
• 제2권4호
• /
• pp.21-26
• /
• 2002

Modem architecture represent a great capitalistic, polishing, high-technology image to the public by design. As a result, glass architecture which show 'transmittance' in desinging play a leading part, consequently a role of machine is increasing in controlling an internal environment of building. These movement look like assisting an universal standard building disregarding a each nation's climate peculiarity, if glass building is applied by a proper external shading device. the shading device has a great effect on the reduction of cooling load energy, this research to propose the proper designing scheme of the fixed external shading device. The effect of proper external shading device on the cooling load is evaluated by the numeric simulation.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2011년도 춘계학술발표대회 논문집
• /
• pp.42-47
• /
• 2011

This study aims to choose installation location of wind power system and analyze influence factors of wind power system by shape of super high-raise building by using CFD simulation. As a result of this study, wind power system is more applicable to streamlined building than normal building. Round openings are seemed to be the most efficient shape for building integrated wind power system in types applying venturi effect. Safety and vibration should be considered in the case of application of wind power system between the buildings.

• 한국태양에너지학회 논문집
• /
• 제27권4호
• /
• pp.157-165
• /
• 2007

Typical meteorological data is fundamental to computer simulation introduced for environment-friendly architecture designs. Therefore, in order to improve accuracy of computer simulation, typical meteorological data should be established. By examining how to choose typical meteorological data, this study selected the optimized weight factor for TRY where weighting factor was not clearly set. As a result, the same weighting factor was applied to each climatic element and TRY data where the weight factor was applied could have the distribution very similar to measurement data. The weighting factor is considered to reflect geographical characteristics of Seoul and applied climatic elements.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2009년도 추계학술발표대회 논문집
• /
• pp.38-43
• /
• 2009

Since most of the existing CFD simulation about thermal environment was limited as indoor environment, it is not appropriate to adopt the same method for external thermal environment, because the solar radiation highly affect the outdoor thermal environment. Thus, in case of assessing the outdoor thermal environment, the radiation calculation is very important. In this study, as a new method to evaluate the outdoor thermal environment, coupled simulation of convection and radiation will be proposed.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.35-49
• /
• 2021

This paper presents a direct numerical simulation of turbulent flows over a bump in an open channel to examine the turbulence characteristics near divergent waves emanating from the bump and to investigate the interaction of the turbulences with the divergent waves. To verify the reliability of the simulations, the mean velocity profile and root-mean-square of velocity fluctuations are compared with previous data. The anisotropic invariant maps show that the ratio of the streamwise to spanwise velocity fluctuations plays an important role in characterizing the anisotropic nature of the separated shear layer behind the bump in the vicinity of the free surface. The vortex identification discloses a large-scale streamwise vortical structure from the mean velocity field and a cluster of small coherent structures from the instantaneous velocity field, which are responsible for the anisotropic characteristics of the turbulence beneath the free surface.

• 한국조경학회:학술대회논문집
• /
• 한국조경학회 2017년도 추계학술대회 논문집
• /
• pp.144-144
• /
• 2017

• 해양환경안전학회지
• /
• 제21권4호
• /
• pp.457-466
• /
• 2015

본 연구에서는 해양플랜트 산업의 가치사슬 및 수명주기 연구를 통해 해양 자원개발 비즈니스의 포괄적인 형상을 파악하였고 해양프로젝트 검증 목적의 시뮬레이션을 위해 조립 및 인간공학 시뮬레이션에 대한 연구를 수행하였다. 구체적으로는 조립 시뮬레이션의 경우 드릴쉽을 대상으로 탑재공정에 대한 조립 시뮬레이션을 통해 공정에 대한 유효성 검증을 수행할 수 있었고, 인간공학 시뮬레이션의 경우 FPSO 플랫폼을 대상으로 작업자 시뮬레이션을 통해 작업환경에서의 문제점을 사전에 도출할 수 있었다.

• 한국군사과학기술학회지
• /
• 제9권3호
• /
• pp.25-32
• /
• 2006

Weapon systems composed of several subsystems execute various engagement missions in distributed combat environments in cooperation with a large number of subordinate/adjacent weapon systems as well as higher echelons through tactical data links. Such distributed weapon systems require distributed real-time simulation test beds to integrate and test their operational software, analyze their performance and effects of cooperated engagement, and validate their requirement specifications. These demands present significant challenges in terms of real-time constraints, time synchronization, complexity and development cost of an engagement simulation test bed, thus necessitate the use of high-performance distributed real-time simulation architectures, and modeling and simulation techniques. In this paper, in order to meet these demands, we presented a distributed real-time simulation system based on High Level Architecture(HLA) and Discrete Event System Specification(DEVS). We validated its performance by using it as a test bed for developing the Engagement Control System(ECS) of a surface-to-air missile system. The proposed technique can be employed to design a prototype or model of engagement-level distributed real-time simulation systems.