• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.382-388
• /
• 1987

In this paper, the performance of Mini MAP architecture is analyzed by simulation method. Token rotation time and waiting time are obtained by simulation. The results of the simulation are compared with these of the analytic model. From these comparisons, it is shown that simulation results are approximately identical to analytic results. Mini MAP architecture has good real time performances in token rotation time and waiting time and can be used to many real time applications.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• 제18권34호
• /
• pp.115-121
• /
• 1995

The objective of this study is to develope an effectiveness measurement technique for U-shaped JIT production line by computer simulation. A small and medium sized automobile brake master cylinder manufacturing plant is studied for productivity improvement The production line is analysed and improved by applying Low Cost Automation, special jigs and fixtures, and facilities layout changes. An experimental simulation model is built using SIMAN(SIMulation ANalysis) simulation software for the production system analysis.

• Journal of Biosystems Engineering
• /
• 제31권4호
• /
• pp.342-348
• /
• 2006

Aerial application using an unmanned agricultural helicopter became necessary for both labor saving and timely spraying. In the previous paper, a rotor system was developed and lift capability was evaluated. The experimental results were compared with simulated predictions using the CFD-ACE program. From the simulation, the relative velocity on the top surface of the blade airfoil increased, resulting in the pressure drop. The CFD analyses were revealed that a drag resistance on the leading edge of the airfoil, a wake at the trailing edge, and a positive pressure underneath the bottom surface were observed. As the results of the simulation, total lifts of 56.8, 74.4 and $95.0kg_f$ were obtained at the 6, 8 and $10^{\circ}$ of AAT (angle of attack), respectively. The simulation results agreed reasonably up to $10^{\circ}$ of AAT. However, at a greater AAT $(<12^{\circ})$ the simulated total lift continuously increased to $105kg_f$, comparing with a decreasing experimental total lift due to the lack of engine power. At a stiff angle of $18^{\circ}$ AAT, a wake was observed at the trailing edge of the airfoil. A rated operating condition determined from the previous paper was also verified through the simulation.

• Journal of Korea Entertainment Industry Association
• /
• 제13권8호
• /
• pp.611-617
• /
• 2019

Purpose: This study applied simulation practice to nursing university students to see if they are related to teamwork capability, perceived interactions. Methods: This study single-group experimental study for 36 students who take a fourth-grade simulation course for nursing college students located in G city and the effects after the practical application. The analysis of the research was done using the SPSS 19.0 program to perform frequency analysis and technical statistical analysis of general characteristics and to identify paired t-test of Teamwork competence and perceived interactions between measurement variables. Results: After the simulation practical application, it was shown that Teamwork competence were improved. Conclusion: The results of this study show that the required teaming capabilities of the clinical site can be verified through simulation practical application, and the detailed design of the module that can develop the Teamwork competence in the future.

• Journal of the Korea Society for Simulation
• /
• 제12권2호
• /
• pp.45-53
• /
• 2003

This paper presents a retargetable compiled assembly simulation technique for fast ASIP(application specific instruction processor) simulation. Development of ASIP which satisfies design requirements in various fields of applications such as telecommunication, wireless network, etc. needs formal design methodology and high-performance relevant software environments such as compiler and simulator In this paper, we employ the architecture description language(ADL) named ${HiXR}^2$ to automatically synthesize an instruction-level compiled assembly simulator. A compiled simulation has benefit of time efficiency to interpretive one because it performs instruction fetching and decoding at compile time. Especially, in case of assembly simulation, instruction decoding is usually a time-consuming job(string operation), so the compiled simulation of assembly simulation is more efficient than that of binary simulation. Performance improvement of the compiled assembly simulation based on ${HiXR}^2$ is exemplified with an ARM9 architecture and a CalmRISC32 architecture. As a result, the compiled simulation is about 150 times faster than interpretive one.

• Journal of the Korea Society for Simulation
• /
• 제5권2호
• /
• pp.85-93
• /
• 1996

Simulation is commonly used to find the best values of decision variables for problems which defy analytical solutions. This objective is similar to that of optimization problems and thus, mathematical programming techniques may be applied to simulation. However, the application of mathematical programming techniques, e.g., the gradient methods, to simulation is compounded by the random nature of simulation responses and by the complexity of the statistical issues involved. In this paper, therefore, we explain the Reverse-Simulation method to optimize a simulation model in a single simulation run. First, we point the problem of the previous Reverse-Simulation method. Secondly, we propose the new algorithm to solve the previous method and show the efficiency of the proposed algorithm.

• Proceedings of the Korea Society for Simulation Conference
• /
• 한국시뮬레이션학회 2001년도 The Seoul International Simulation Conference
• /
• pp.484-484
• /
• 2001

The sophistication of current software applications results in the increasing cost fur software development time. The component-based software development framework is proposed to overcome the difficulty and time-consuming requirements by modularity and reusability. As is the general software case, a component-based simulation framework encourages the reusability of the real system model based on the modularity of the applied simulation methodology. This paper presents a component-based simulation environment that is based on the DEVS/COM run-time infrastructure. The DEVS (Discrete Event System Specification) formalism provides a formal modeling and simulation framework for the generic dynamic systems [1] and Microsoft's COM (Component Object Model) is one of the strongest competitor fur the component standard. The reusability by the DEVS/COM simulation environment saves model development time remarkably and component technology make simulator itself to be a subparts of real application.

• Journal of the Korea Society for Simulation
• /
• 제21권2호
• /
• pp.31-39
• /
• 2012

Simulation Framework is a basic software tool used to develop simulation applications. This paper describes the development of a discrete event simulation framework based on DEVS(Discrete EVent System Specification) formalism, using MATLAB language which is widely used in technical computing and engineering disciplines. The newly developed framework utilizing MATLAB object oriented programming combines the convenience of MATLAB language and the sophisticated architecture of the DEVS formalism. Hence, it supports the productivity, flexibility, extensibility that are required for the simulation application software development of the weapon systems engagement. Moreover, it promises a simulation application the increased the computation speed proportional to the number of CPU of a multi-core processor, providing the batch simulation functionality based on MATLAB parallel computing technology.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• 제62권9호
• /
• pp.1240-1248
• /
• 2013

This paper describes a switching-level operation analysis of BTB(Back-To-Back) converter for HVDC(high voltage DC) application based on MMC(modular multi-level converter). A switching-level operation analysis for BTB converter is very important to understand the converter operation in detail and check the voltage and current transients in each components. However, the development of switching-level simulation model for the actual size BTB Converter is very difficult because the MMC normally has more than 150 sub-modules for each arm. So, a switching level simulation model for the 11-level MMC-based BTB converter was developed with PSCAD/EMTDC software, which has 12 sub-modules for the positive arm and another 12 sub-modules for the negative arm. The DC-voltage balance algorithm, the circulating-current reduction algorithm, the harmonic reduction algorithm, and the redundancy operation algorithm were included in this simulation model. The developed simulation model can be utilized to analyze the MMC-based BTB converter for HVDC application in switching level and to develop the protection scheme for the MMC-based BTB converter for HVDC application.

• Journal of the Korea Society for Simulation
• /
• 제7권2호
• /
• pp.79-90
• /
• 1998

This paper introduces the concept of web-based simulation and suggests the structure of web-based simulation which reduces the simulation run time and performs simulations in efficient way under distributed environments. Since its introducing in 1996, web-based simulation has been studied only with a tool of applet, but in this paper a method of server applications for client applets will be used. In server application, server transfers objects requested by clients such as simulation engines, reports, files. After each client connects to web-server, and then server allocates simulation modules to connected clients. These work magnify the transferring applets from server and simulation models which were made by clients. This paper also processes a structure for managing efficiently web-based simulation under distributed environment and steps in which clients connect, model, simulate with distributed structure, and programs of proposed structure.