• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.36 no.4
• /
• pp.280-286
• /
• 1987

A new method is presented for obtaining redced-order model for time-invariant systems. This method does not require the calculation of the reciprocal transformation, the alpha table, the beta-table and the alpha-beta expansion which should be calculated in Routh approximation method, hence it is computationally very attractive better than Routh approximation method, furthemore the stability of the reduced-order model is guaranted if the original system is stable. This method starts with the continued fraction espansion of auxiliary denominator polynomial give for the denominator polynomial of the reduced-order model. The coefficients of the numerator polynomial are then obtained by equating moment of the original and the reduced-order medel.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.42 no.5
• /
• pp.989-991
• /
• 2017

This letter proposes the method for approximating a stochastic geometry based downlink multicell network performance in a wide range of interference and noise levels. This method facilitates the simplification of a multicell network design problem for the base station density and transmit power.

• Proceedings of the KIEE Conference
• /
• 2002.11c
• /
• pp.562-564
• /
• 2002

Noise reduction and a simplification of a precision measurement system has been performed by changing analog output mode of a load cell into digital output mode. Usually, analog output signal of a few $\mu V$ from a load cell are amplified by amp and acquired by A/D converter. If the distance from a load cell to a DAS(Data Acquisition System) increases, more noise signals are mixed. So, a microprocessor has been integrated into a load cell so that the amplification and A/D conversion of output signals could be done in close proximity to the lode cell for the reduction in mixing of noise. Obtained data from the load cell like this manner are transferred to a computer with digital values(of TTL level). To simplify the configuration of a multi-channel DAS, RS-485 communication system has used for data transfer.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.647-649
• /
• 1998

본 논문에서는 다각 근사화 방법과 래스터 기반 연산 알고리즘을 이용하여 평면 지도상에 나타난 등고선을 3차원 가시화(Visualization)하여 보여준다. 다각 근사화 방법은 입력한 등고선에 대한 특징을 반영할 수 있는 최소한의 선형구분 오차 임계값을 이용하여 등고선에 근사화 시킨 것으로 저장 데이터의 양을 축소할 수 있다. 래스터 기반 알고리즘은 이웃한 두 개의 등고선 내부점의 높이 값을 그 점에서 두 등고선까지의 최단거리 및 등고선의 높이값을 변수로 하는 선형보간식으로 정의하고, 거리변환 연산을 도입하여 계산하는 알고리즘으로 구현이 용이하며, 간단한 계산만을 수행하기 때문에 처리 방법이 간단하다는 장점을 갖는다. 본 논문에서는 래스터 방법만을 이용한 복원보다 자료의 양이 감소함을 보였고, 전체 처리과정의 간단함과, 3차원 가시화된 등고선을 그래프 좌표상의 X, Y, Z축으로 원하는 각도만큼씩 회전시키며 관찰 할 수 있도록 하였다. 본 연구를 통해 지형의 특징을 원형 등고선과 유사하게 유지하면서, 데이터 양을 축소하고 계산식을 간략화된 효과적인 지형정보 시각화를 보여주었다.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10c
• /
• pp.650-652
• /
• 1998

본 논문은 mesh 간략화를 위한 새로운 Gaussian 곡률 오차 추정 방법을 제안한다. Gaussian 곡률은 임의의 형상을 갖는 삼각화 된 단면체 표면에 대하여 위상과 기하학적 정보를 angle 과 face 의 관계로 정형화하여, vertex에 관한 곡률로 근사하여 표현한다. 간략화 방법은 지역적 형상으로부터 전체적인 형상을 추정한 후, 적절한 curvature criteria 로 간략화가 될 vertex를 선택하고 제거한다. 제거된 vertex에 의해 생성된 hole은 곡률에 기반하여 삼각화하고 곡률이 변화되는 vertex들의 Gaussian 곡률 오차를 계산한다. 각 간략화 level마다 최대 Gaussian 곡률 오차를 계산하므로, 사용자는 Gaussian 곡률 오차 추정으로 원하는 간략화 level을 지정할 수 있다. 또한 주어진 오차 안에서 vertex뿐만 아니라 edge나 face의 제거로, 간략화 되는 영역을 확산시켜 필요한 위상과 기하학적 정보를 유지하는 간략화를 할 수 있다.

• Journal of the Korean Society of Combustion
• /
• v.21 no.1
• /
• pp.18-30
• /
• 2016

Pyro-process of solids is the way to heat solid materials under high temperature. In this processing, energy efficient use is one of the main concerns due to its high energy consumption of bulk materials. To calculate the energy use of processes, heat & mass balance in simplified 0-dimensional model was performed. Energy calculation by this simplified model can lead to confusion due to simplification. Thus, it is necessary to understand considerations of energy analysis. In this study, cement manufacturing as a very common example of pyro-processing of solids, was introduced for explaining considerations of energy analysis for energy efficient use.

• Journal of Biomedical Engineering Research
• /
• v.5 no.1
• /
• pp.77-84
• /
• 1984

A prototype of a linear real-time ultrasound B-scanner has been developed which has an axial resolution of 1-2mm and lateral resolution of 2-3mm. In the actual hardware and software implementations of the B-scanner, the following features were emphasized; (1) a dynamic focusing to improve resolution; (2) signal processing to obtain low noise image; (3) various functions for the user's convenience' (4) simplification of the system by an extensive use of recently developed LSI's; (5) development of a prototype at the level of a commercial product. This paper reports the experimental results of the overall system and the design approach of the analog part. The work on the digital part of the B-scanner is reported in part (II) seperately.

• Journal of Korean Society for Quality Management
• /
• v.29 no.4
• /
• pp.133-152
• /
• 2001

In order to have competitive advantage for the business firms, companies need to raise competitiveness through the effective distribution and practical use of management resources along with strategic management of integration of existing management systems such as quality and business environment. Upon resulting of questionnaires to expert group, it is definite to have an integration of quality and environment system for the better efficiency of firms, and also recommended to have either a mixture of two systems or build up new integration system through uniform of two systems. The effects of the integrated system can be summarized as an increase of company image, efficiency of system operation, simplification of system management, synergy effects on the integration.

• Transactions of Materials Processing
• /
• v.11 no.5
• /
• pp.414-422
• /
• 2002

Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. In some cases, that approximation causes significant errors due to loss of geometrical information as well as simplification of the flow characteristics along the thickness direction. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the classical shell-based approach. The Proposed approach is then applied to predict product defects and to improve flow characteristics for a precision electronics part. In addition, design of experiment has been utilized in order to find the optimal process conditions for better product quality.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2002.02a
• /
• pp.68-75
• /
• 2002

Most of numerical analyses for injection molding have been based on the Hele Shaw's approximation: two-dimensional flow analysis. In some cases, that approximation causes significant errors due to loss of geometrical information as well as simplification of the flow characteristics along the thickness direction. The present work covers numerical analyses of injection molding using three-dimensional solid elements. The accuracy of the analysis results has been verified through some numerical examples in comparison with the classical shell-based approach. The proposed approach are then applied to predict product defects and to improve flow characteristics for a precision electronics part. In addition, design of experiment has been utilized in order to find the optimal process conditions for better product quality.