• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 하계학술대회 논문집
• /
• pp.25-28
• /
• 2001

Recently, STI(Shallow Trench Isolation) process has attracted attention for high density of semiconductor device as a essential isolation technology. Without applying the conventional complex reverse moat process, CMP(Chemical Mechanical Polishing) has established the Process simplification. However, STI-CMP process have various defects such as nitride residue, torn oxide defect, damage of silicon active region, etc. To solve this problem, in this paper, we discussed to determine the control limit of process, which can entirely remove oxide on nitride from the moat area of high density as reducing the damage of moat area and minimizing dishing effect in the large field area. We, also, evaluated the reliability and reproducibility of STI-CMP process through the optimal process conditions.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2002년도 하계학술대회 논문집 Vol.3 No.2
• /
• pp.782-784
• /
• 2002

Many compound semiconductors which have high carrier mobility and small band gap have attentive in application of various practical a field. Especially, InSb served for Hall device and magnetic resistor such as magnetic sensor because InSb thin film has high mobility. Many studies on InSb thin film deposition because In and Sb has been very different feature of vapor pressure($10^4$ times) When In and Sb deposited. In this paper studied it In and Sb deposited simultaneously using by method of co-sputtering deposotion. This process, get to effects of manufacture process simplification. After that this paper observed micro structure and electronic behavior of InSb thin film using by co-sputtering.

• 한국태양에너지학회:학술대회논문집
• /
• 한국태양에너지학회 2008년도 춘계학술발표대회 논문집
• /
• pp.154-159
• /
• 2008

Daylight is an important component for human and energy saving. Also, available daylight in inside provides positive influence on psychological and physiological aspects as well as good visual environment. It is important to lighting design for office building not only designing for artificial lighting but also using daylight for energy savings. Therefore, lighting designers and architectures must consider the effects of the daylight for human environment and energy savings. The BIN Method is one of the methods to predict energy savings using computer simulation but it spends more time than expectation. So, this study performs to simulate a simple space using the RADIANCE for examination and simplification of the BIN Method.

• 영어어문교육
• /
• 제16권4호
• /
• pp.201-222
• /
• 2010

The purpose of this study is to investigate /l/-deletion in lC clusters which are composed of a lateral followed by consonants at syllable-final position in English. For this, I have analyzed /l/-deletion in words depending on conditions and theoretical analyses such as Sonority Sequencing Generalization, Cluster Simplification, Complex sounds and merger, and Feature Geometry, but they didn't offer a very satisfactory explanation to the phenomenon. Therefore, I adopted a historical approach in order to determine the cause and origin of /l/-deletion in lC clusters, and then as a phonological analysis tool, I relied on the constraints and their ranking in Optimal Theory framework for explaining /l/-deletion in the clusters more consistently. As a result, I can explain the phenomenon more explicitly than from the above mentioned analyses.

• 한국GIS학회:학술대회논문집
• /
• 한국GIS학회 2008년도 공동추계학술대회
• /
• pp.264-265
• /
• 2008

본 연구에서는 건물공사에 사용되는 CAD 도면자료를 공간데이터로 변환하기 위한 과정의 일환으로 수치지도 작성내규에 근거한 선형단순화 기법을 제안하였다. 이 기법은 외곽선의 절점들이 수치지도 작성내규의 곡선데이터 점간거리 규정에 만족할 때까지 반복적으로 절점의 구간을 늘려나가는 방식이다. 제안된 기법의 단순화효과를 비교하기 위하여 Douglas-Peucker 알고리듬 등 가장 흔히 사용되는 4개의 선형 단순화기법을 동일한 건물 외곽선에 적용하여 수치지도작성 내규 만족도, 절점수, 선길이, 면적에 대해 비교, 분석하였다. 분석결과 제안된 알고리듬의 경우 수치지도 내규 만족도 면에서 100%에 가까운 만족도를 보였으며 절점수를 효율적으로 줄이면서, 선길이, 면적의 측면에서도 다른 알고리듬들에 비해 거의 손실이 발생하지 않아 추후 건설도면의 변환에 유용하게 사용될 가능성이 높을 것으로 판단된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1308-1311
• /
• 1996

We propose a new linearized model which can be used very efficiently for the design and analysis of the autopilot of aerodynamically controlled skid-to-turn missiles. Proposed model is based on the linearized equations of the missile dynamics derived in the aerodynamic frame where xz plane contains the missile longitudinal axis and velocity vector. However, to take the effect due to the small perturbation of the missile body into consideration, we introduce a new frame which is identical to the aerodynamic frame in the trim state but after small perturbation it moves fixed with the missile body, and finally, the proposed model is set up in this frame. It is shown by nonlinear simulations and stability analysis of a numerical example that the new model describes the missile motion better than the conventional one linearized in the body frame with a certain amount of simplification.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집(한일합동학술편); 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.898-904
• /
• 1987

A new control algorithm using the VSS theory is developed for accurate trajectory control of robot manipulators. This paper focuses on the implementation of VSS controller with smoothing laws in the design of effective tracking control for robotic arms. The VSS controller for multi-linkage robot arm is realized using balance condition and its simplification which possesses powerful smoothing capability to reduce or even remove undesirable chattering and meanwhile keep the robust characteristic to reject system uncertainties. The design principle of selecting different smoothing methods, which aims at achieving trade-off between smoothing and robust behaviors while considering the actual system constraints, is also given and further confirmed through experimental results.

• 통상정보연구
• /
• 제6권3호
• /
• pp.183-201
• /
• 2004

Recently, Electronic commerce market is growing sharply for the expansion of internet and development of means of air transportation. Import Clearance System for express consignments, introduced in Korea, confers some benefit upon express consignments, ie. prompt clearance, simplification of the clearance procedure, exemption of necessary documents. But it has some problems such as lack of social security and trade compliance. So it requires some improvements as follows. Firstly, it has no legal background to clear all articles valued at US$100 or less carried by an express consignment operator. So customs brokers, not express consignment operators, should clear that articles. Secondly, it should be presented necessary documents including commercial invoice to prevent a wrong price declaration in entering express consignments valued at US$100 or less. Thirdly, X-ray inspectors must enhance their inspection ability. Customs must provide education programs for X-ray inspectors to improve their inspection ability. Lastly, Cargo selectivity system for express consignments have to be improved to operate effectively.

• 한국디지털정책학회:학술대회논문집
• /
• 한국디지털정책학회 2006년도 춘계학술대회
• /
• pp.113-123
• /
• 2006

The purpose of this paper is twofold; 1) to evaluate the efforts of participatory government in regulatory reform, 2) to propose the strategies and tasks for future regulatory reform in Korea. An ex-post evaluation model for regulatory performance is applied to process, output, and outcome of the regulatory reform. The results of the evaluation show that there is still room for improvement in many aspects of regulatory reform. While there has been substantial advance in regulatory quality and management, carefully planned strategies are essential for Korean regulatory reform to move to the next stage of regulatory reform. Thus, based on the evaluation, future strategies and tasks for regulatory reform are presented as short-term tasks, mid to long range tasks, and continuous tasks.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2006년도 춘계학술발표회 논문집(I)
• /
• pp.406-409
• /
• 2006

Serviceability resign is required to control the cracking at the joint of precast decks having longitudinal prestress in continuous composite bridges. Especially, details of twin girder bridges are complex not only due to main reinforcements and transverse prestress for the resign of long-span concrete slabs but also due to shear pockets for obtaining the composite action. This paper suggests the design guidelines for the magnitude of the effective prestress and for the selection of filling materials and their requirements in order to use precast decks for twin-girder continuous composite bridges. The necessary initial prestress was also evaluated through the long-term behavior analysis. From the analysis, existing design examples were revised and their effectiveness was estimated. When a filling material having bonding strength higher than the requirement is used in the region of high negative moment, uniform configuration of longitudinal prestressing steels along the whole span length of continuous composite bridges can be achieved resulting in simplification of details and enhancement of the construction costs.