• 대한가정학회지
• /
• 제47권8호
• /
• pp.25-35
• /
• 2009

This study analyzed expression types and characteristics of modern fashion designs using body parts. The research was conducted based on a literature review and empirical research of fashion magazines published in Korea and other countries from 2001 to 2008. Four fashion statements predominated. Most frequently, body parts presented in modern fashion design, included realistic expressions, simplification, anatomic expression and a mixture with other patterns and logos. A body part, such as an eye, a lip, a hand or a chest was characteristically located in an unfamiliar position, as part of modern fashion design using body parts. Other parts and surrealistic images were shown with accessories utilizing body shapes. Second, amusing images were emphasized with humorous expressions, including simplification of body parts, childish decorations, fairy tale illusions and cartoon factors. Third, erotic images were presented with a more realistic expression of a partial image of a female body part, such as a lip or a tongue. Fourth, the use of facial images of celebrities in modern fashion design showed the phase of the times and the characteristic utilization of pop art as an image.

• 한국정보처리학회논문지
• /
• 제7권3호
• /
• pp.935-942
• /
• 2000

In this paper we introduce a fast simplification algorithm for terrain height fields to produce a triangulated irregular network, based on the greedy insertion algorithm in [1,4,5]. Our algorithm partitions a terrain height data into rectangular blocks with the same size ad simplifies blocks one by one with the greedy insertion algorithm. Our algorithm references only to the points and the triangles withing each current block for adding a point into the triangulation. Therefore, the algorithm runs faster than the greedy insertion algorithm, which references all input points and triangles in the terrain. Our experiment shows that partitioning method runs from 4 to more than 20 times faster, and it approximates test height fields as accurately as the greedy insertion algorithms. Most greedy insertion algorithms suffer from elongated triangles that usually appear near the boundaries. However, we insert the four corner points into each block to produce the base triangulation of the block before the point addition step begins so that elongated triangles could not appear in th simplified terrain.

• 한국의류학회지
• /
• 제29권11호
• /
• pp.1410-1420
• /
• 2005

The purpose of this study was to analyze characteristics of effective expression on T-shirts pattern by peirce's semiotic theory. The methods of this study was to analyze 721 T-shirts patterns in designer's collection from 2000 to 2004. The results of this study were as follows: First of all, iconic expression showed high frequency after 2000. Characteristics of effective expression were as follows: In geometric expression, repetition was presented as a symbolic sign by regular proportion and rule of dot, line, plane, irregularity, mixture of irregular dot, line, plane. Mixed expression was presented as a iconic and symbolic sign by collage, mixture of dot, line, plane, icon and letter. In iconic expression, simplification of iconic sigrl was presented as a iconic sign by simplification of form, color, texture, realistic expression using digital as a iconic sign, and symbolic face, body as a symbolic sign. Pop art's expression was presented as a iconic sign by a cartoon and commercial character and illusion was presented as a iconic sign. In letter's expression, brand logo was presented as a symbolic sign by transformation of letter's design, a symbolic sign of numeral by transformation of size, thickness, form, color. Symbolic message phrase was presented by slogan, fashion trend, brand image, descriptive indication message as a index sign by using icon or singleness. In conclusion, characteristics of effective expression on T-shirts pattern will present not only the theoretical foundation to raise the value added, but also the information about beauty sense of times, political and social value.

• 한국주조공학회지
• /
• 제39권1호
• /
• pp.1-6
• /
• 2019

During the casting process, it is possible to minimize shrinkage and blowholes by modifying the casting design. However, it is impossible to eliminate these factors completely. Therefore, mechanical design engineers apply a sufficient safety factor owing to the possibility of insufficient performances of the cast products. In this paper, prediction method of the fatigue life of cast products containing shrinkage is conducted by using CT (computed tomography) and the SSM (shape simplification method), and additional fatigue analyses are carried out. The analysis results are then compared to results from actual experiments on samples with shrinkage defects. It is found to be that the considering actual shrinkage in cast products by means of stress and fatigue analyses is more accurate and effective. It is also considered that the proposed hot spot method provides us a good tool to predict the fatigue lifes of cast product.

• 시스템엔지니어링학술지
• /
• 제17권2호
• /
• pp.49-60
• /
• 2021

The Core Protection Calculator System (CPCS) is vital for plant safety as it ensures the required Specified Acceptance Fuel Design Limit (SAFDL) are not exceeded. The CPCS generates trip signals when Departure from Nucleate Boiling Ratio (DNBR) and Local Power Density (LPD) exceeds their predetermined setpoints. These setpoints are established based on the operating margin from the analysis that produces the SAFDL values. The goal of this research is to create a simplified CPCS that optimizes operating margin for I-SMRs. Because the I-SMR is compact in design, instrumentation placement is a challenge, as it is with Ex-core detectors and RCP instrumentation. The proposed CPCS addresses the issue of power flux measurement with In-Core Instrumentation (ICI), while flow measurement is handled with differential pressure transmitters between Steam Generators (SG). Simplification of CPCS is based on a Look-Up-Table (LUT) for determining the CEA groups' position. However, simplification brings approximations that result in a loss of operational margin, which necessitates compensation. Appropriate compensation is performed based on the result of analysis. FPGAs (Field Programmable Gate Arrays) are presented as a way to compensate for the inadequacies of current systems by providing faster execution speeds and a lower Common Cause Failure rate (CCF).

• 한국압력기기공학회 논문집
• /
• 제19권2호
• /
• pp.163-170
• /
• 2023

Since spent nuclear fuel assemblies (SFA) are transported to interim storage or final disposal facility after cooling the decay heat, finite element analysis (FEA) with simplification is widely used to show their integrity against cladding failure to cause dispersal of radioactive material. However, there is a lack of research addressing the comprehensive impact of shape and element simplification on analysis results. In this study, for the optimization of a typical pressurized water reactor SFA, different types of finite element models were generated by changing number of fuel rods, fuel rod element type and assembly length. A series of FEA in use of these different models were conducted under a shock load data obtained from surrogate fuel assembly transportation test. Effects of number of fuel rods, element type and length of assembly were also analyzed, which shows that the element type of fuel rod mainly affected on cladding strain. Finally, an optimal finite element model was determined for other practical application in the future.

• 한국산업융합학회 논문집
• /
• 제27권3호
• /
• pp.555-561
• /
• 2024

This paper derives material properties of steel bars that simulate the distribution of stress and strain of prestressed tendons used in Prestressed concrete(PSC) girders and presents an optimal material model. ABAQUS software was used to establish the 3D solid model of the PSC girder and strand wire rope for a PS(Prestressed) tendon. Then the model of steel wire rope was imported into the Isight interface plugin directly through the ABAQUS and the Data Matching. In ABAQUS, the contact pairs were established, the models were meshed, the constraints were applied to solve the finite element model and an axial tension of 0.5m/s was loaded to analyze the stress and deformation distributions in the normal working range of the PS strand wire rope. In Data Matching, classical experimental data is fitted to the optimal material properties through finite element analysis and multi-objective optimization. The results show that the steel bar with optimal material properties presents a similar linear area and stress distribution with the PS tendon.

• 경영정보학연구
• /
• 제10권2호
• /
• pp.159-177
• /
• 2008

IMF 외환위기 이후, 외국계 은행이 국내에 진출하면서 금융기관간의 경쟁은 매우 치열해졌다. 기업은행을 포함한 주요 은행들은 치열한 경쟁에서 살아남기 위해 고객 가치 증대를 경영의 핵심으로 삼는 전략의 일환으로 IT 기반구조인 차세대시스템을 서둘러 구축하고 있다. 이 사례 연구의 목적은 다음과 같은 다섯 가지 질문에 대해 실무적 의미를 이해하기 위한 것이다: 1) 금융기관이 'IT 기반구조'에 막대한 투자를 해야 하는 이유 2) 차세대시스템의 개발방법 3) 차세대시스템의 아키텍처 4) 차세대시스템투자 여부를 위한 의사결정구조 그리고 5) 차세대시스템의 성과. 이 목적을 달성하기 위해 기업은행 임직원을 대상으로 한 심층적 면담과 기업은행 및 국내 주요 은행의 차세대시스템 구축과 연관된 자료를 광범위하게 수집하여 분석하였다. 이 사례 연구의 결론 및 시사점은 다음과 같이 밝혀졌다. 첫째, 차세대 시스템은 비즈니스 프로세스의 통합 및 단순화에 기여하는 것으로 나타났다. 둘째, 차세대시스템을 바탕으로 시장의 요구에 맞춘 금융상품의 개발이 신속해졌다. 셋째, IT 기반구조의 구축에는 변화관리가 매우 중요하다. 넷째, 'IT 의사결정구조'에 따라 시스템의 아키텍처는 다양해질 수 있다. 다섯째, 차세대시스템과 비즈니스 프로세스의 조화는 조직의 목적 달성에 매우 중요하다.

• 대한전자공학회논문지SP
• /
• 제42권6호
• /
• pp.33-42
• /
• 2005

본 논문에서는 영역 기반 부호화를 위해 수리형태학 연산자를 이용한 영역 분할 알고리즘을 제안한다. 수리형태학을 이용한 영상 분할은 단순화, 마커 추출, 영역 결정의 세 단계로 구성된다. 단순화 단계는 분할을 용이하게 하기 위하여 영상의 복잡한 부분들을 제거하는 단계이고, 마커 추출단계는 단순화 과정을 거친 영상으로부터 각 영역의 초기 기준 영역을 찾는 과정이다. 영역 결정단계는 추출된 마커로부터 각 영역의 경계를 결정하는 단계이다. 단순화를 위해 기존 평탄면 필터를 효과적으로 개선한 크기와 대조를 고려한 효과적인 Connected Operator를 사용한다. 마커 추출 과정에서 원영상으로 복원된 영역은 제외시키고 나머지 부분에서 크기와 대조가 일정값 이상인 영역을 마커로 결정한다. 생성된 모든 마커와 Hierarchical Watershed algorithm을 이용하여 초기 영상 분할을 하고 영역 병합과정에서는 영역 수에 대한 화질의 저하를 최소로 하는 영역 병합 알고리즘을 제안한다. 동시에, 시각적 특성을 고려하여 일정 대조 이상인 영역 쌍은 병합에서 제외시킨다. 실험 결과에서 제안된 마커 추출 방법이 화질을 많이 저하시키지 않는 범위 내에서 적은 수의 마커를 추출하며, 영역 병합과정을 통해 많은 불필요한 영역들을 병합할 수 있음을 보인다.

• 한국항해항만학회지
• /
• 제29권5호
• /
• pp.439-445
• /
• 2005

최근 입출항 수속 간소화에 대한 관심이 증대되면서 국제해사기구의 간소화 위원회를 중심으로 입출항 수속 절차와 신고서식의 표준화 작업이 진행되고 있다. 또한 항만 선진국에서는 전자적 수단을 이용하여 입출항 수속을 간소화함으로써 입출항 정보의 원활한 흐름과 효율화를 증대시키는 연구가 활발히 진행되고 있다. 입출항 수속 간소화 문제는 개별 단위국가의 노력으로는 한계가 있고, 관련 국가들간의 협력을 통해 원만히 해결 될 수 있다. 이에 따른 입출항 수속과 관련한 신고서식 및 절차의 표준화와 정보의 통합화가 선행되어야 한다. 먼저 본 연구에서는 입출항 수속 간소화에 대한 국세동향 분석을 통해 선진항만에서 이루어지고 있는 간소화 사례를 살펴보았다. 다음으로 한${\cdot}$중${\cdot}$일 3국을 중심으로 동북아 항만의 입출항 수속현황과 신고서식을 분석하여 공통적인 문제점을 도출하였으며 이를 해결하기 위한 방안으로 ebXML 기반에 국제 항만 입출항 신고 시스템을 제안하였다. 본 프레임워크를 통해 입출항 수속 정보의 재사용과 신고의 자동화가 가능해 짐으로써 간소화를 실현할 수 있으며, 항만산업에 전자상거래를 도입할 수 있는 기반을 마련하였다.