• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2002.05a
• /
• pp.82-88
• /
• 2002

A simple beam subjected to a uniformly distributed tangential follower force and the successive two moving spring-mass systems upon it constitute this vibration system. The influences of the velocities of the moving spring-mass system, the distance between the successive two moving spring-mass systems and the uniformly distributed tangential follower force have been studied on the dynamic behavior of a simple beam by numerical method. The uniformly distributed tangential follower force is considered within its critical value of a simple beam without the successive two moving spring-mass systems, and three kinds of constant velocities and constant distance of the successive two moving spring-mass systems are also chosen. Their coupling effects on the transverse vibration of the simple beam are inspected too.

• Journal of electromagnetic engineering and science
• /
• v.5 no.1
• /
• pp.1-7
• /
• 2005

The implementation of a simple analog in-phase combiner is presented for a high capacity radio relay system with space diversity. It provides good performance in terms of simple hardware and easy control, and measured results are in good agreement with simulated ones. To suggest practical applications, signatures with/without diversity are measured for STM-1 signal of 64-QAM radio relay system combined with a 13-tap equalizer, and they provided more than 25 dB fade depth at 10$^{-3}$ BER under the frequency selective fading condition.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.336-343
• /
• 2005

In the braced excavations, careful consideration must be given to the risks of progressive collapse of the entire support system due to failure of a single member. The existing connection methods of the excavation support system results in many problems during construction. To overcome these, simple joint method is proposed in this study. The full scale test and the numerical analysis using finite element method were performed to verify the safety of them. As results, simple joint method was good effective to increase strength. And it was good effective to decrease in numbers of bolt. Also, new method is cheaper than existing connection methods and a good construction as well.

• Journal of Power System Engineering
• /
• v.4 no.4
• /
• pp.65-69
• /
• 2000

On the dynamic behavior of a simple beam subjected to an uniformly distributed tangential follower force, the influences of the velocities and magnitudes of a moving mass have been studied by numerical method. The instant amplitude of a simple beam is calculated and analyzed for each position of the moving mass represented by the time functions. The uniformly distributed tangential follower force is considered within its critical value of a simple beam, and four values of velocity is also chosen. Their coupling effects on the deflections of a simple beam are inspected too. When a moving mass moves after middle zone of a simple beam at the low velocities, its deflection is increased by the coupling of an uniformly distributed tangential follower force and moving mass.

• Proceedings of the KSME Conference
• /
• 2003.04a
• /
• pp.195-200
• /
• 2003

An expert system for estimation of fatigue properties from simple tensile data of material is developed, considering nearly all important estimation methods proposed so far, i.e., 7 estimation methods. The expert system is developed using an expert system shell, UNIK, and the knowledge base is constructed with production rules and frames. Forward chaining is employed as a reasoning method. The expert system has three major functions including the function to update the knowledge base. The performance of the expert system is tested using the 54 ${\sigma}-N$ curves consisting of 381 ${\sigma}-N$ data points obtained for 22 materials. It is found that the expert system developed has excellent performance especially for steel materials, and reasonably good for titanium alloys.

• Earthquakes and Structures
• /
• v.13 no.3
• /
• pp.231-239
• /
• 2017

Fundamental period is one of the most critical parameters affecting the seismic design of buildings. In this paper, a very simple approach is presented for estimating the fundamental period of multiple-degree-of-freedom (MDOF) structures. The basic idea behind this approach is to replace the complicated MDOF system with an equivalent single-degree-of-freedom (SDOF) system. To realize this equivalence, a procedure for replacing a two-degree-of-freedom (2-DOF) system with an SDOF system, known as a two-to-single (TTS) procedure, is developed first; then, using the TTS procedure successively, an MDOF system is replaced with an equivalent SDOF system. The proposed approach is expressed in terms of mass, stiffness, and number of stories, without mode shape or any other parameters; thus, it is a very simple method. The accuracy of the proposed method is investigated by estimating the fundamental periods of many MDOF models; it is found that the results obtained by the proposed method agree very well with those obtained by eigenvalue analysis.

• Journal of Environmental Impact Assessment
• /
• v.22 no.3
• /
• pp.255-264
• /
• 2013

This paper diagnosed the assessment problems and development types of the simple statement of the Sea Area Utilization Consultation System. and suggested the key assessment items for system improvement. The major types of Public Water occupation and use, and distribution characteristic of regional and coastal were analyzed by evaluate 529 review items during 2010-2012. The artificial structure installation including harbor and fishing port facilities in the South and West coast, and seawater supply and drainage for land-based aquaculture and power plant were dominated. The checklists considering each types of occupation and use in Public Water were suggested. In addition, policy proposals for system improvement were suggested.

• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.6-8
• /
• 1994

Switched reluctance motor drive system is well known as a variable speed drive system because it has a simple motor structure and a simple driving circuit. Widely slotted photo interrupter has been investigated as a position sensor for SRM speed control because it has advantages of low cost and simple structure. However it has low resolution and it produces dead-time signal. This paper studies variable speed SRM drive system with slotted photo-interrupter. Controller in this study is constructed by using fuzzy controller that covers system nonlinearities and small perturbations in sufficiency. The performance of this system is evaluated through computer simulation and experiment results.

• Proceedings of the IEEK Conference
• /
• 2000.11b
• /
• pp.128-131
• /
• 2000

In this paper, the animated simulation system (Anisim) is proposed in order to develope an efficient functional system verification tool. It displays the simulation results of the designed system using graphic animation with various models lot the target system. With simple interface definitions given by the user, Anisim generates interface codes automatically. Users can describe and model the target system with the generated interface codes. Since the simulation engine is implemented in C-language, modeling is very simple and simulation can be performed in real time.

• The Korean Journal of Zoology
• /
• v.22 no.4
• /
• pp.175-183
• /
• 1979

This simple culture device is based on the microtube culture method (Cho, 1974). The microtube culture system was placed in a plastic tube (Falcon, 12 $\\times$ 75 mm) and the transporting system used in the present study were Trans-Temp 310 (Royal Industries, 209 D 135-1). The simple culture device in the Trans-Temp 310 seems to be an available method for short term culture and some distance transportation of oocytes and embryos.