• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2007년도 학술대회
• /
• pp.55-58
• /
• 2007

An adaptive subcarrier allocation scheme based on comparative superiority of opportunity cost between groups is proposed for the enhancement of system capacity and its simple implementation at the base station of a multiuser OFDM system. The proposed algorithm is similar to the blockwise or the decentralized subcarrier allocation algorithm proposed by Xiaowen et al and Alen et al, respectively. In the proposed algorithm, however, all subcarriers are grouped according to the coherence bandwidth and the comparative superiority concept, which swaps the groups between users if the system capacity is increased, is adopted for the enhancement of system capacity. In addition, the proposed algorithm provides a simple solution for the conflict problem among users by reallocating only the conflicted groups and unassigned groups instead of reallocating entire groups. Simulation results demonstrate that the proposed algorithm increases the system capacity effectively over a static, an adaptive blockwise, and a decentralized subcarrier allocation algorithms.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2006년 학술대회 논문집 정보 및 제어부문
• /
• pp.330-332
• /
• 2006

In this paper, sun tracking system using Sun position sensor is proposed, the sun tracking system designed as which raises the efficiency of solar power generation. It design the structure being simple and it develops the system which is economical efficiency. It develops the hazard technique such as location tracking method of the sun which uses the sensor and to use the motor solar cell module movement. The Sun tracking system makes the drive in order to do with one axis and to use the sensor and to know in order to put out, the location of the sun and it makes. To make the solar location tracking sensor where the structure is simple it used two solar cells.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2005년도 ICCAS
• /
• pp.2379-2384
• /
• 2005

We propose a novel method for object recognition using the smart tag system with a stereo vision on a pan-tilt mechanism. We developed a smart tag which included IRED device. The smart tag is attached onto the object. We also developed a stereo vision system which pans and tilts for the object image to be the centered on each whole image view. A Stereo vision system on the pan-tilt mechanism can map the position of IRED to the robot coordinate system by using pan-tilt angles. And then, to map the size and pose of the object for the robot to coordinate the system, we used a simple model-based vision algorithm. To increase the possibility of tag-based object recognition, we implemented our approach by using as easy and simple techniques as possible.

• 반도체디스플레이기술학회지
• /
• 제19권3호
• /
• pp.106-111
• /
• 2020

In this paper, we propose the non-contact gesture recognition system and algorithm using proximity-based sensors. The system uses four IR receiving photodiode embedded on a single chip and an IR LED for small area. The goal of this paper is to use the proposed algorithm to solve the problem associated with bringing the four IR receivers close to each other and to implement a gesture sensor capable of recognizing eight directional gestures from a distance of 10cm and above. The proposed system was implemented on a FPGA board using Verilog HDL with Android host board. As a result of the implementation, a 2-D swipe gesture of fingers and palms of 3cm and 15cm width was recognized, and a recognition rate of more than 97% was achieved under various conditions. The proposed system is a low-power and non-contact HMI system that recognizes a simple but accurate motion. It can be used as an auxiliary interface to use simple functions such as calls, music, and games for portable devices using batteries.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.863-874
• /
• 2009

The engineering characteristics and the reinforcement effect of the elephant foot method were discussed with parametric study. The elephant foot method is adopted to support the loads transferred from tunnel crown and improve bearing capacity of elephant foot in poor ground condition. The evaluation of reinforcement effect, which has the mechanical relationship between ground condition, footing size and reinforcement system, was carried out through the previous research and numerical analysis. In addition, the simple design chart was proposed to estimate the applicability of the elephant foot reinforcement method. It will be practical for the engineer to determine the optimum reinforcement method for safe tunnelling in soft ground condition.

• Journal of Electrical Engineering and Technology
• /
• 제12권3호
• /
• pp.1257-1261
• /
• 2017

This paper focuses on understanding the interrupting capability of an arc contact system in a molded case circuit breaker (hereafter MCCB). We selected four types of MCCBs and analyzed the magnetic flux density distributions in the contact systems caused by the fault currents. We ascertained that the magnetic flux density profile varies according to the shape of the contact system and was asymmetric at both the ends of an arc, perpendicular to the arc column because of the magnetic grid installed in the contact system. The asymmetric difference creates a magnetic force that pushes the arc current outwards and provides an interrupting capability. We have introduced a simple analysis method for determining the interrupting capability of the contact system for an MCCB by the arc-driving magnetic flux density.

• 전력전자학회논문지
• /
• 제4권6호
• /
• pp.570-578
• /
• 1999

이 논문은 인터넷이나 정보통신망을 이용하여 멀리 떨어져 잇는 기기를 제어하거나 감시하는 원격 제어 시스템을 개발하는 것을 목표로 하고 있다. 이 때 원격 제어용 프로토콜로는 SNMP(Simple Network Manatement Protocol)를 사용하였고, 지역적으로 멀리 떨어져 있는 기기에 대한 실시간 제어 및 감시를 위하여 자바(Java) 환경의 소프트웨어를 구축하였다. 도한 이 논문에서는 네트워크 기기와 응용 기기 사이의 인터페이스 컨트롤러를 제안하여 대부분의 기기에서도 이 원격 제어 시스템을 사용할 수 있다는 가능성을 보였다.

• Journal of information and communication convergence engineering
• /
• 제16권2호
• /
• pp.125-129
• /
• 2018

In the field of computer graphics, rendering speed is one of the most important factors. Contemporary rendering is performed using 3D graphics systems with windowing system support. Since typical graphics systems, including OpenGL and the DirectX library, focus on the variety of graphics rendering features, the rendering process itself consists of many complicated operations. In contrast, early computer systems used direct manipulation of computer graphics hardware, and achieved simple and efficient graphics handling operations. We suggest an alternative method of accelerated 2D and 3D graphics output, based on directly accessing modern GPU hardware using the direct rendering manager (DRM) system. On the basis of this DRM support, we exchange the graphics instructions and graphics data directly, and achieve better performance than full 3D graphics systems. We present a prototype system for providing a set of simple 2D and 3D graphics primitives. Experimental results and their screen shots are included.

• 한국정보시스템학회지:정보시스템연구
• /
• 제27권4호
• /
• pp.203-227
• /
• 2018

Purpose The purpose of this study is to investigate which decision factors continue to use the service based on the online simple payment service. In this study, we will examine how to activate the service from the continuing factors through the dual-model theory consisting of personal dedication and constraint dedication which are frequently used in relation marketing. Design/methodology/approach In this study, we investigated the activation of online simple settlement service using factors affecting the preference of the simple payment service based on the dual-model of dedication-based mechanism and constraint-based mechanism. Findings This study confirmed that customer satisfaction and convenience under the dedication -based mechanism were found to be linked to the preference of the simple payment service. Switching cost under the constraint - based mechanism showed that the customer had no binding ability to continue using the service of the current provider. Likewise, preference was found to have a direct effect on the actual frequency of use of the simple payment service, the number of uses compared to the total number of online payments, and willingness to use more.

• 전기의세계
• /
• 제30권12호
• /
• pp.817-821
• /
• 1981

A simple scheme using the single equivalent machine representation, equivalent loss reprsentation and direct hydro-MW representation are applied to economic dispatch for practical applications. A,simple approach to calculation of incremental transmission losses is proposed from the fast decoupled load flow algorithm. This program is presently being tested on KECO system.