• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.50 no.2
• /
• pp.86-90
• /
• 2001

This paper presents a multi output converter system that controls, simultaneously, the separate buck converter and boost converter with the different specification by one digital controller using fuzzy algorithm. As two separate converters are regulated by only one DSP, it is possible to achieve the simple digital control circuit for regulating multi output DC-DC converter. Inference procedure of fuzzy controller is included. The control characteristics of each PWM DC-DC converter is validated by experimental results.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.4
• /
• pp.517-525
• /
• 1996

A Simple AC complex circuit analysis for LCL type series resonant converter with phase shift control is proposed. Based on these analyses, a set of characteristic curves which allows a optimal design procedure for this converter is shown, without increasing the volt-ampere rating of tank circuit Especially, inverter output peak current can be minimized in both full load and partial load conditions. The presented design considerations can make the load range wide from full loads to light loads achieving turn-on with zero voltage switching (ZVS) operation. The detailed analysis and experimental results show the effectiveness of the proposed design algorithms. (author). refs., figs., tab.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.3B no.3
• /
• pp.139-146
• /
• 2003

In this paper, the steady-state operating performance analysis for the three-phase squirrel cage rotor self-excited induction generator (SEIG) driven by a variable-speed prime mover (VSPM) in addition to a constant-speed prime mover (CSPM) is presented on the basis of an effective algorithm based on its frequency-domain equivalent circuit. The operating characteristics of the three-phase SEIG coupled by a VSPM and/or a CSPM are evaluated on line processing under the condition of the electrical passive load parameters variations with simple and efficient computation processing procedure in unregulated voltage control loop scheme. A three-phase SEIG prototype setup with a VSPM as well as a CSPM is implemented for the small-scale clean renewable and alternative energy utilizations. The experimental operating characteristic results are illustrated and give good agreements with the simulation ones.

• Journal of Information Processing Systems
• /
• v.6 no.4
• /
• pp.453-480
• /
• 2010

Cryptographic hash functions reduce inputs of arbitrary or very large length to a short string of fixed length. All hash function designs start from a compression function with fixed length inputs. The compression function itself is designed from scratch, or derived from a block cipher or a permutation. The most common procedure to extend the domain of a compression function in order to obtain a hash function is a simple linear iteration; however, some variants use multiple iterations or a tree structure that allows for parallelism. This paper presents a survey of 17 extenders in the literature. It considers the natural question whether these preserve the security properties of the compression function, and more in particular collision resistance, second preimage resistance, preimage resistance and the pseudo-random oracle property.

• Journal of the Korean institute of surface engineering
• /
• v.29 no.5
• /
• pp.467-473
• /
• 1996

Heteroepitaxial growth of cubic silicon carbide films on Si(001) and Si(111) substrates at temperatures 900-$1000^{\circ}C$ has been achieved by high vacuum chemical vapor deposition using the single precursor 1, 3-disilabutane without carrying out the carbonization process of the substrate surfaces. The deposition temperature range is much lowered compared with conventiontional chemical vapor deposition where separate sources for silicon and carbon are employed. The deposition procedure is quite simple and safe. The qualities of the films were found to be very good judging from the results obtained by various characterization techniques including reflection high energy electron diffraction, X-ray diffraction, X-ray pole figure analysis, Rutherford backscattering spectrometry, Auger depth profiling, and transmission electron diffraction.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.126-128
• /
• 2007

This paper presents a new soft switching dc-to-dc converter that employs IM transformer. Detailed analysis and design considerations of the proposed circuits are presented. By applying the proposed magnetic integration procedure, new integrated magnetic circuits featuring low loss, simple structure are then developed to overcome the limitations of prior art. Consequently, the power loss and the size of the integrated magnetic device are greatly reduced. The operation and performance of the proposed converter are demonstrated with an experimental converter that delivers a 5V/5A output from a 48V input at the maximum efficiency of 90 %.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.129-131
• /
• 2007

In this paper, a single phase matrix converter circuit with novel commutation technique is proposed. With commercial IGBT modules, the proposed converter is quite compact in structure and easy to build. The applied commutation strategy introduces a simple RC circuit as commutation aid without need for sensing information, leading to stable and reliable operation. The modulation method is explained; the detailed commutation procedure is illustrated. Finally, the simulation results show the validity and verification of the proposed single phase matrix converter.

• Journal of Pharmaceutical Investigation
• /
• v.21 no.2
• /
• pp.79-84
• /
• 1991

The agar diffustion method using Escherichia coli was investigated for determination of Vitamin $B_{l2}$ instead of turbidimetric method using Lactobacillus leichannii (USP XXII method). The turbidimetric method is difficult to control the test organism and it has complicated procedure. From this study, it was found that the agar diffusion method on the determination of Vitamin $B_{12}$ in pharamaceutical preparation is simple and convenient as compared with turbidimetric method. Also we found that the coefficient of variation in reproducibility and the standard error in recovery were 2.18% and 1.83%, respectively.

• International Journal of Aeronautical and Space Sciences
• /
• v.18 no.3
• /
• pp.425-435
• /
• 2017

In this work, an overview of flow diagnosis in a shock tunnel is made by means of using established techniques that are easy to setup, economical to arrange, and simple to measure. One flow condition was considered having Mach number of 6 at the nozzle-exit, regarded as freestream. Measured aerothermodynamic data such as shock wave speed, wall static and total pressures, surface heat flux, and shock stand-off distance ahead of test model showed good agreement with calculation. This study shows an overall procedure of flow diagnosis in a shock tunnel in a single manuscript. Outcomes are thought to be useful in the field of education and also in a preliminary stage of high-speed vehicle design and tests, that need to be performed within a short time with decent accuracy.

• Journal of Electrical Engineering and Technology
• /
• v.13 no.3
• /
• pp.1147-1155
• /
• 2018

This paper presents an improved method to determine the internal parameters for improving accuracy of a lithium ion battery equivalent circuit model. Conventional methods for the parameter estimation directly using the curve fitting results generate the phenomenon to be incorrect due to the influence of the internal capacitive impedance. To solve this phenomenon, simple correction procedure with transient state analysis is proposed and added to the parameter estimation method. Furthermore, conventional dynamic equation for correction is enhanced with advanced RC impedance dynamic equation so that the proposed modeling results describe the battery dynamic characteristics more exactly. The improved accuracy of the battery model by the proposed modeling method is verified by single cell experiments compared to the other type of models.