• Computers and Concrete
• /
• v.4 no.2
• /
• pp.101-117
• /
• 2007

A new model predicting the nonlinear basic creep behaviour of concrete structures subjected to high multi-axial stresses is proposed. It combines a model based on the thermodynamic framework of the elasto-plastic continuum damage theory for time-independent material behaviour and a rheological model describing phenomenologically the long-term delayed deformation. Strength increase due to ageing is regarded. The general 3D solution for the creep theory is derived from a rate-type form of the uniaxial formulation by the assumption of associated creep flow and a theorem of energy equivalence. The model is able to reproduce linear primary creep as well as secondary and tertiary creep stages under high compressive stresses. For concrete in tension a simple viscoelastic formulation is applied. The material law is then incorporated into a finite element solution procedure for analysis of reinforced concrete structures. Numerical examples of uniaxial creep tests and concrete members show excellent agreement with experimental results.

• 제어로봇시스템학회:학술대회논문집
• /
• 1995.10a
• /
• pp.332-335
• /
• 1995

A simple and effective method for improving Euclidean norm condition number for chemical processing system is presented. The singular value sensitivities of Freudenberg et al. (1982) is used to estimate the behavior of singular values of process transfer function matrix when design parameter is changed, then the condition number can be calculated straightforwardly. The method requires explicit dependencies of each transfer function matrix elements on design parameters. These dependencies can be obtained either by symbolic differentiation in the form of explicit function of design parameters, or by numerical perturbation studies for units with large and complicated models. Gerschgorin-type lower bound for minimum singular value is introduced to detect the large divergencies near singular point due to linearity of sensitivities. The case studies are performed to show the efficiency of the proposed method.

• 제어로봇시스템학회:학술대회논문집
• /
• 1999.10a
• /
• pp.53-56
• /
• 1999

The control performance of a chemical process is determined by process structure as well as the performance of controllers. Therefore, the concept of“controllability”should be introduced in the early design stage. Structural information makes controllability assessment possible by giving insights on the pathways of disturbances in the process. In this study, a simple procedure to evaluate controllability is suggested to screen out design alternatives using relative order analysis and structural decomposition. The effectiveness of the proposed method was validated by comparing the results with the case of dynamical simulation.

• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.6
• /
• pp.455-461
• /
• 2002

Object-based image retrieval method is addressed. A new image segmentation algorithm and image comparing method between segmented objects are proposed. For image segmentation, color and texture features are extracted from each pixel in the image. These features we used as inputs into VQ (Vector Quantization) clustering method, which yields homogeneous objects in terns of color and texture. In this procedure, colors are quantized into a few dominant colors for simple representation and efficient retrieval. In retrieval case, two comparing schemes are proposed. Comparing between one query object and multi objects of a database image and comparing between multi query objects and multi objects of a database image are proposed. For fast retrieval, dominant object colors are key-indexed into database.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1066-1070
• /
• 1990

This paper presents a method for the optimal control of the distributed parameter systems (DPSs) by a hierarehical computational procedure. Approximate lumped parameter systems (LPSs) are derived by using the Galerkin method employing the Legendre polynomials as the basis functions. The DPSs however, are transformed into the large scale LPSs. And thus, the hierarchical control scheme is introduced to determine the optimal control inputs for the obtained LPSs. In addition, an approach to block pulse functions is applied to solve the optimal control problems of the obtained LPSs. The proposed method is simple and efficient in computation for the optimal control of DPSs.

• 제어로봇시스템학회:학술대회논문집
• /
• 1990.10b
• /
• pp.1210-1215
• /
• 1990

This paper deals with the fault diagnosis problem in uncertain linear systems having undermodelling, linearization errors and noise inputs. The new approach proposed in this paper uses an appropriate test variable and the difference between system parameters which are estimated by the least squares method to locate the fault. The singular value decomposion is used to decouple the correlation between the estimated system parameters and to observe the trend of parameter changes. Some simulations applied to aircraft ergines show good allocation of the fault even though the system model has significant uncertainties. The feature of the approach is to diagnose the uncertain system through simple parameter operations and not to need complex calculations in the diagnosis procedure as compared with other methods.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.448-452
• /
• 2001

An Experimental study was carried out to develop a simple method of processing copper waste sludge which is produced by PBC manufacturing. The procedure is based on leaching of wet sludge in 2N H$_2$SO$_4$, and the solid / liquid ratio is controlled approximately at 1/10. The recovery of copper is 85.4%, and pH of the leachate is 3.20. Adding ammonia solution into leachate forms ammine, and hydroxide compounds derived from other impurities in leachate at pH 10. The hydroxide compound can be treated by ferrite process, and the product is a stable oxide compound. Then the ammine solution is heated to evaporate ammonia, and the copper hydroxide is formed. Heating at 8$0^{\circ}C$by aeration, copper hydroxide is transformed into copper oxide with a purity of 98.4%. This process can recover most copper from sludge and the residue can be stabilized by the formation of a stable oxide compound which is not hazardous to environment.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.7
• /
• pp.2243-2248
• /
• 2011

Carbon-based solid acid catalyst was found to be highly efficient, eco-friendly and recyclable heterogeneous catalyst for the multicomponent reaction of dimedone, aromatic aldehydes, and a nitrogen source (ammonium acetate or aromatic amines) under solvent-free conditions, giving rise to 1,8-dioxodecahydroacridines in high yields. The present methodology offers several advantages, such as a simple procedure with an easy work-up, short reaction times, high yields, and the absence of any volatile and hazardous organic solvents.

• Journal of the Korean Chemical Society
• /
• v.57 no.4
• /
• pp.472-475
• /
• 2013

An efficient and environmentally benign protocol for the three-component synthesis of triazoloindazoles and indazolophthalazines via condensation of dimedone, aldehydes and urazole or phthalhydrazide catalyzed by $ZrOCl_2.8H_2O$ as an inexpensive and eco-friendly catalyst with high catalytic activity under solvent-free conditions is reported. This protocol provides a new and improved method for obtaining triazoloindazoles and indazolophthalazines in terms of good yields, simple experimental procedure and short reaction time.

• Korean Journal of Human Ecology
• /
• v.2 no.2
• /
• pp.49-62
• /
• 1999

The purpose of this study is to evaluate the combination of details on the maternity clothes of one-piece type through visual evaluation which helps compensating pregnant women＇s body defects for their more attractive fashion styles. The data evaluated by a multiple ranking test were analyzed by mean, paired t-test, general linear models procedure and Duncan＇s multiple ranged test. The result are as follows : 1) The pregnant woman wearing the one-piece dress with notched collar, pleats and whole button looks longer in lower part of bodies, smaller in upper body, slimmer, have less appeared bust and abdomen, more balanced as a Whole than when wearing others. And also, it makes a pregnant woman be seen more refined and simple. 2) In case of a pregnant woman, a one-piece dress with notched collar, tuck and whole button makes her look longer in neck, narrower in shoulder, and more active than when wearing others. 3) With roll collar, pleats and whole button, it looks taller and more graceful than when wearing others.