• KIEE International Transactions on Power Engineering
• /
• v.5A no.2
• /
• pp.138-143
• /
• 2005

During faults, the voltage and current signals available to the relay are affected by the decaying dc component and harmonics. In order to make appropriate and accurate decisions, most of the relaying algorithms require the fundamental frequency phasor information that is immune to decaying dc effect and harmonics. The conventional Fourier ph as or estimation algorithm is affected by the presence of decaying-exponential transients in the fault signal. This paper presents a modified Fourier algorithm, which effectively eliminates the decaying dc component and the harmonics present in the fault signal. The decaying dc parameters are estimated by means of an out-of-band filtering technique. The decaying dc offset and harmonics are removed by means of a simple computational procedure that involves the design of two sets of Orthogonal digital OFT filters tuned at different frequencies and by creating three off-line look-up tables. The technique was tested for different decay rates of the decaying dc component. It was also compared with the conventional mimic plus the full cycle OFT algorithm. The results indicate that the proposed technique has a faster convergence to the desired value compared to the conventional mimic plus OFT algorithms over a wide range of decay rates. In all cases, the convergence to the desired value was achieved within one cycle of the power system frequency.

• Journal of the Korean Society for information Management
• /
• v.13 no.1
• /
• pp.47-63
• /
• 1996

Conventional automatic indexing methods for Hangul texts can be classified into two groups as follows: One is to extract index terms by removing non-indexable segments from word-phrases, and the other is to generate index terms from the morphemes of word-phrases. The former suffers from the problem of word boundaries when documents contain many compound nouns. The latter can overcome the word boundary problem by extracting simple nouns, but has many overheads to develop a lot of linguistic knowledges needed in the indexing procedure. In this paper we propose a new indexing method based on n-grams. This method alleviates the problems of previous indexing methods related with word boundaries and linguistic knowledges. We also compare the effectiveness of the n-gram based indexing method with that of the previous ones.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.7 no.1
• /
• pp.42-51
• /
• 1995

In order to establish a theoretical basis for the analyses of transient behaviors in stratified thermal storage tanks, analytical approaches to an improved one-dimensional model are made. In the present model the storage tank is treated as a finite region with an adiabatic tank exit, whereas it has been considered as a simple semi-infinite region previously. Application of the Laplace transformation and the Inversion theorem to the governing equations makes it possible to obtain an exact infinite-series solution, which is convergent only at sufficiently large time. Accordingly a complementary solution which is available for short times, i.e., the time range of this study is sought by an approximate method. The approximate solution which is rigorously validated through the examination of neglected terms in the solution procedure agrees quite well with the exact one. Moreover, it is simpler to use and more convenient to interpret the physical meaning of the solution. Comparison of the present solution with the previous ones shows relatively large difference near the tank bottom, which results from the more realistic boundary condition adopted in the present model. Some representative results by the approximate solution including effects of the Peclet number on temperature distrbutions are illustrated to show the utility of this study. In consequence, it is expected that the present results based on the improved model replace the foregoing ones as a new theoretical reference for studies of thermal stratification fields.

• Journal of the Korean Institute of Telematics and Electronics T
• /
• v.35T no.3
• /
• pp.87-95
• /
• 1998

This paper presents the method for the automatic tuning of a design weighting polynomial parameter of a generalized minimum-variance stochastic self tuning controller which adapts to changes in the system parameters with time delays and noises. The self tuning effect is achieved through the recursive least square algorithm at the parameter estimation stage and also through the Robbins-Monro algorithm at the stage of optimizing a design weighting polynomial parameters. The proposed self tuning method is simple and effective compared with other existing self tuning methods. The computer simulation results are presented to illustrate the procedure and to show the performance of the control system.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.1
• /
• pp.29-36
• /
• 1999

We propose a new method of asymptotic inference on the odds ratio (or cross-product ratio) in $2{\times}2$ contingency table. Saddlepoint approximations to the conditional tail probability we used in this procedure. We assess the accuracy of the suggested method by comparing with the exact one. To obtain the exact values, we need very complicated calculations containing the cumulative probabilities of non-central hypergeometric distribution. The suggested method in this paper is very accurate even for small or moderate sample sizes as well as simple and easy to use. Example with a real data is also considered.

• Journal of Ocean Engineering and Technology
• /
• v.29 no.3
• /
• pp.207-216
• /
• 2015

Amanifold is one of the essential subsea oil and gas production components to simplify the subsea production layout. It collects the production fluid from a couple of wellheads, transfers it to onshore or offshore storage platforms, and even accommodates water and gas injection flowlines. This paper presents the basic design procedure for a manifold frame structure with novel structural verification using in-house unity check codes. Loads and load cases for the design of an SIL 3 class-manifold are established from a survey of relevant industrial codes. The basic design of the manifold frame is developed based on simple load considerations such as the self weights of the manifold frame and pipeline system. In-house software with Eurocode 3 embedded, called INHA-SOLVER, makes it possible to carry out code checks on the yield and buckling unities. This paper finally proves that the new design of the manifold frame structure is effective to resist a permanent and environment load, and the in-house code is also adaptively combined with the commercial finite element code Nastran.

• The Journal of the Korean dental association
• /
• v.37 no.6 s.361
• /
• pp.445-455
• /
• 1999

Arthrocentesis is a simple, less invasive, inexpensive, and highly efficient procedure for closed lock of the temporomandibular joint with regard to the lack of recurrence of symptoms during extended periods of follow-up and significiant improvement in pain and jaw function. It can be performed under local anesthesia. Arthrocentesis closed lock provide sustained normal joint function and marked pain relief. This study is the clinical outcome of arthrocentesis for closed lock of the temporomandibular joint. 160 patients(169 joints) who had experienced sudden-onset, persistent limited mouth opening were the subjects of this study. Arthrocentesis of the upper compartment of the affected TMJ was performed using normal saline. As results, at 3-60 months postarthrocentesis maximum mouth opening(MMO) had increased from mean of 27.7mm to 43.5mm, contralateral movements(CLM) from mean 5.74mm to 9.55mm, midline deviation during mouth opening from mean 3.04mm to 0.69mm. In 130 cases there was a history of joint noises, in 52 cases all noise had ceased after procedures.

• Journal of Families and Better Life
• /
• v.19 no.6
• /
• pp.241-263
• /
• 2001

The objectives of this study were empirically to test the reformative model for Korean sacrificial rite and to investigate the effects of demographic variables. the survey was conducted by means of questionnaire with 600 persons located in Seoul. Major findings were as follows ; 1, Sacrificial day ; was displayed (1) dead day (2) holiday in back and forth of dead day 2. Sacrificial time ; was showed (1) 8-9 h. p.m (2) 6-7 h. p.m 3. Sacrificial extent ; was displayed (1) grandparents and parents (2) only parents 4. Participative extent ; was showed (1) Cousin (2) only sons and daughters 5. Sacrificial procedure ; was displayed twice deep bow and 1 minute\`s silent prayer. 6. New year's and Chusok's rite ; was showed (1) simple foods (2) joint leisure time 7. Sacrificial table ; was displayed (1) boiled rice . water . gustoish articles. (2) omission of food table 8. rite\`s socialization ; was showed (1) delivery and marketing sale\`s food (2) special sacrificial restaurant. 9. Womens'and mens'difference ; women were active 7ut men were passive 10. Age's difference ; excepting 30-40, the all generations were more reformative. 11. Number of brothers ; small number of brothers were more reformative than a many number. 12. Sacrificial manager or not , managers were conservative than persons were not managers.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.60 no.1
• /
• pp.26-31
• /
• 2011

In this paper, we focused on the loop distribution system to solve the international issues of energy depletion and global warming. The conventional method of reconfiguration of distribution system was moving open points of switches from an actual switch position to another, while an appropriate switch must be opened to preserve the radial structure and this procedure is continued til there is no further loss reduction. However, the loop distribution system is the best optimization method to minimize loss than the other methods which is preserving radial structure. So we analyzed 3 types of loop distribution system upgraded from radial distribution system by changing normally open switch to normally closed switch. The simple 3 types of model system for simulation were composed, and each types of loop system were simulated in accordance with varying parameters. As a result of simulations, the loss reduction was different for each types of loop distribution system and each loop types have constraints for composing loop distribution system. The algorithms propose the method how to construct loop distribution system regarding constraints. Type I that needs least requirements get least loss reduction and Type III that needs most requirements get maximum loss reduction. On the other hand, Type I was most feasible distribution system to be realized.

• IE interfaces
• /
• v.12 no.1
• /
• pp.68-78
• /
• 1999

A noncircular cutting such as a piston cutting has depended on the copy-machining because of its complex shape. But the copy-machining needs a master model and brings about a low quality of the piston caused by being worn out of the master model. And the lower cutting speed reduces the productivity. In this paper, for solving these problems, a specialized software system and its subsequent procedure are presented. The shape of a piston consists of an oval, an offset, recesses, and eccentricities. The paper describes these shapes as a consistent equation that is a function of the rotational angle and the position of longitudinal direction(Z-axis). It is simple to define the characteristic geometry of a piston and to generate a tool path for CNC machining. This paper proposes the a proper structure of a 4-axes CNC(Computerized Numerical Control) lathe for machining the piston. As well as X-axis and Z-axis, are attached to the machine a C-axis for rotation and a Y-axis for higher speedy prismatic motion parallel to X-axis.