• Nuclear Engineering and Technology
• /
• v.48 no.3
• /
• pp.727-732
• /
• 2016

A simple and rapid spectrophotometric method has been developed to enable the determination of plutonium concentration in an irradiated fuel solution in the presence of all fission products. An excess of ceric ammonium nitrate solution was employed to oxidize all the valence states of plutonium to +6 oxidation state. Interference due to the presence of fission products such as ruthenium and zirconium, and corrosion products such as iron in the envisaged concentration range, as in the irradiated fuel solution, was studied in the determination of plutonium concentration by the direct spectrophotometric method. The stability of plutonium in +6 oxidation state was monitored under experimental conditions as a function of time. Results obtained are reproducible, and this method is applicable to radioactive samples resulting before the solvent extraction process during the reprocessing of fast reactor spent fuel. An analysis of the concentration of plutonium shows a relative standard deviation of <1.2% in standard as well as in simulated conditions. This reflects the fast reactor fuel composition with respect to uranium, plutonium, fission products such as ruthenium and zirconium, and corrosion products such as iron.

• Economic and Environmental Geology
• /
• v.30 no.1
• /
• pp.15-23
• /
• 1997

Gold mineralization of the Ogkye gold mine was deposited mainly in quartz veins up to 150 cm wide which occupy fissures in Cambrian Pungchon limestone. Ore minerals are relatively simple as follows: pyrite, arsenopyrite, pyrrhotite, sphalerite, electrum and galena. On the basis of the Ag/Au ratio on ore grades, mode of occurrence and assoicated mineral assemblages, the Ogkye gold deposit can be classified as pyrite-type gold deposit (Group IIB). Fluid inclusion data indicate that ore minerals were deposited between $400^{\circ}$and $230^{\circ}C$ from relatively dilute fluids (0.2 to 7.3 wt.% eq. NaCl) containing $CO_2$. The ore mineralization resulted from a complex history of $CO_2$ effervescence and local concomitant boiling coupled with cooling and dilution of ore fluids. Gold deposition was likely a result of decrease of sulfur activity caused by sulfide deposition and/or $H_2S$ loss accompanying fluid unmixing. Sulfur isotope compositions of sulfide minerals (${\delta}^{34}S=3.5{\sim}5.9$‰) are consistent with ${\delta}^{34}S_{H_2S}$ value of 4.8 to 6.1‰, suggesting mainly an igneous source of sulfur partially mixed with wall-rock sulfur.

• Journal of Sensor Science and Technology
• /
• v.23 no.1
• /
• pp.42-45
• /
• 2014

Recently, tremendous application utilizing electrospun nanofibers have been actively reported due to its several advantages, such as high surface to volume ratio, simple fabrication and high-throughput manufacturing. In this paper, we developed highly sensitive and consistent nanofiber humidity sensor by electrospinning. The humidity sensor was fabricated by rapid electrospinning (~2 sec) $TiO_2$/PVP/LiCl mixed solution on the micro-interdigitated electrode. In order to evaluate the humidity sensing performances, we measured current response using DC bias voltage under various relative humidity levels. The results show fast response / recovery time and marginal hysteresis as well as long-term stability. In addition, with the aid of micro-interdigitated electrode, we can reduce a total resistance of the sensor and increase the total reaction area of nanofibers across the electrodes resulting in high sensitivity and enhanced current level. Therefore, we expect that the electrospun nanofiber array for humidity sensor can be feasible and promising for diverse humidity sensing application.

• Korean Journal of Veterinary Pathology
• /
• v.7 no.1
• /
• pp.55-57
• /
• 2003

A nine-year-old female Yorkshire terrier dog showing mammary secretion mixed with blood and pus for 5 month duration was presented. Cytologically mammary secretion consisted of many pleomorphic tumor cells, RBC, and neutrophil. Tumor cells were characterized by polyhedral pleomorphic nuclei with smudged chromatin and basophilic cytoplasm with many secretory vacuoles. N/C ratio was very high. Therefore it was diagnosed as mammary gland adenocarcinoma. Histological examination confirmed cytological diagnosis. From these results cytology isfor the diagnosis of secreting mammary gland adenocarcinoma is very simple and accurate for the diagnosis of secreting mammary gland adenocarcinoma.

• Journal of environmental and Sanitary engineering
• /
• v.21 no.2 s.60
• /
• pp.11-19
• /
• 2006

Ran numerical analysis about simplicity warm current model (simple turbulence model) to examine closely distributed laying stress on NOx of contaminant that happen in downtown that building is massed and result is as following. Downtown building is massed and transfer of vehicles can know that frequent area receives greatly effect of building. Pollution displays class kind phenomenon striking in the building, class kind done pollution that show high density being mixed with pollution that happen in vehicles being flowed in again side know can. Divide velocity vector of pollution and density change to ancient city and did numerical analysis. Because NOx is flowed in diversion of water neighborhood by continuous this kind in Godo 20m point, density showed density of $0.0907mg/m^3s$, and can know that Banryuhyeon that Pollution strikes in the building at ancient city 30m point is decreased and approaches with freedom flowing without cooperation (cavity) phenomenon remarkably. Because pollution strikes in the building at distance shaft 383m point, class kind do phenomenon that know appeared notedly Nopeungeonmulgwanat between building pollution density $0.067mg/m^3$ head of a families high appear.

• Phonetics and Speech Sciences
• /
• v.6 no.3
• /
• pp.13-21
• /
• 2014

Late talkers are young children who are delayed in their expressive language skills despite normal nonverbal cognitive ability, adequate hearing and typical personality development. The purpose of this study is to investigate the sentence interpretation strategies used by Korean-speaking late talkers and age-matched normal children. Nine late talkers and nine normal children matched by age at 30-35months were participated in this study. 27 simple noun-noun-verb(NNV) sentences were generated by factorial combination of case-marker [nominal case-marker on the first noun and accusative on the second (C1), accusative on the first noun and nominative on the second (C2), and no case markers on both nouns (C0)], and animacy of the nouns [animate-inanimate(AI), inanimate-animate(IA), animate-animate(AA)]. All the children were asked to "act out" their interpretation of the given sentence. For each type of sentences the percentage of choices of the first noun as the agent was calculated. The results of group (2) ${\times}$ animacy(3) ${\times}$ case-marker(3) mixed ANOVA showed a significant main effect for 'animacy', 'case marker' and 'group(2) ${\times}$ case-marker (3)'. The late talkers relied on semantic (animacy) cues in their interpretation of the sentences, while the normal peers utilized both animacy and grammatical morpheme (case-marker) cues. The results indicated that the late-talkers' comprehension skills were also delayed.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.7 no.4
• /
• pp.247-253
• /
• 2007

In this paper, a high throughput multiple transform architecture for H.264 Fidelity Range Extensions (FRExt) is proposed. New techniques are adopted which (1) regularize the $8{\times}8$ integer forward and inverse DCT transform matrices, (2) divide them into four $4{\times}4$ sub-matrices so that simple fast butterfly algorithm can be used, (3) because of the similarity of the sub-matrices, mixed butterflies are proposed that all the sub-matrices of $8{\times}8$ and matrices of $4{\times}4$ forward DCT (FDCT), inverse DCT (IDCT) and Hadamard transform can be merged together. Based on these techniques, a hardware architecture is realized which can achieve throughput of 1.488Gpixel/s when processing either $4{\times}4\;or\;8{\times}8$ transform. With such high throughput, the design can satisfy the critical requirement of the real-time multi-transform processing of High Definition (HD) applications such as High Definition DVD (HD-DVD) ($1920{\times}1080@60Hz$) in H.264/AVC FRExt. This work has been synthesized using Rohm 0.18um library. The design can work on a frequency of 93MHz and throughput of 1.488Gpixel/s with a cost of 56440 gates.

• Journal of the Korean Society of Costume
• /
• v.51 no.5
• /
• pp.17-28
• /
• 2001

The purposes of this study were to arrange and analyze the Oriental Mode in 20th century fashion and to clarify that Oriental dress and its ornaments appearing as the main subject of Occident fashion gradually The results were as follows : First, Oriental Mode in 1900-1950s was prescribed as the 'Orientalism' to be expressed Occidental imperialistic viewpoint. Therefore, the Orient was used as the simple recording mark of the imperialism product or commercial motive and it was reflected in fashion. Second, it was explained in 1960-1970s as the 'Folklore Orientalism' that focus was moved into the folklore costume of Orient. Third, in 1980s, 'Ethnic' was conspicuous that reflected the traditional costume in the area of non-christianity. Especially, it was the decade that the Middle East attracted attention. Fourth, Oriental Mode in 1990s appeared as the 'Fusion' that Oriental and Occidental elements were mixed and compromised on equal terms. Fifth, it was expressed as a word 'Zen' that had natural fiber, moderate color and silhouette to be most basic and concise about human body at the end of 1990s. This study could confirm that the center of fashion was being converted into the Orient gradually. This may be understood as the pluralistic culture phenomenon. Namely, eclectic principle to recognize mutual style and individualistic nature and to utilize and mix was made, and this brought the conversion into Oriental sense of value.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.20 no.4
• /
• pp.1437-1448
• /
• 1996

This paper presents a simplified model for approximate analysis of the solute redistribution in coarsening dendrite arms during solidification of binary metal alloys. By introducing a quadratic concentration profile with a time-dependent coefficient, the integral equation for diffusion in the solid phase is reduced to a simple differential relation between the coefficient and the solid-liquid interface position. The solid fraction corresponding to the system temperature is readily determined from the relation, phase equilibrium and the overall solute balance in which the liquid phase is assumed to be completely mixed. In order to validate the developed model, calculations are performed for the directional solidification of Al-4.9 mass Cu alloy. The predicted eutectic fractions for a wide range of the cooling rate reasonably agree with data from the well-known experiment as well as sophisticated numerical analyses. Also, the results for the back diffusion limits are consistent with available references. Additional calculations show that the characteristic parameters such as the coarsening, density variation and nonlinarity in the phase diagram significantly affect the microsegregation. Owing to the simplicity, efficiency and compatibility, the present model may be suitable for the micro-macroscopic solidification model as a microscopic component.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2008.05a
• /
• pp.61-65
• /
• 2008

This study, having combined and displaced blast furnace slag("BS" hereinafter) known as admixture material that delays hydration reaction with coarse particle cement("CC" hereinafter) collected in particle classification method during ordinary portland cement("OPC" hereinafter), reviewed the hydration heat characteristics affecting the concrete. To reduce hydration heat, the study plain-mixed which used 100% OPC for W/B 50% level 1, displaced CC at level 3 of 25%, 50% and 75% for OPC, and by displacing BS with admixture material at level 5 of 0%, 20%, 40%, 60% and 80% for cement(OPC+CC), experimented totally 16 batches. As a result of experiment, in the case of flow, the more CC displacement rate increased, the more it tended to decrease, and the more BS displacement rate increased, the more it decreased. Also, as for simple adiabatic temperature rise by the CC and BS displacement rates, it decreased as displacement rate increased, and particularly in the case of displaced BS of 80%, It showed temperature reduction effect of about 63% companing with plain. Compressive strength decreased in proportion to displacement rate, however strength reduction increment was shown to decrease with age progress.