• Journal of the Korean Society of Food Science and Nutrition
• /
• v.30 no.1
• /
• pp.25-31
• /
• 2001

Characteristics (salt concentration, weight loss, soluble solid content, moisture content, pH, textural properties) of kakdugi radish cube (kakdugi radish, $2{\times}2{\times}2\;cm$) were evaluated during salting. Five different radish cultivars harvested in autumn were immersed into 10, 15 or 20% brine solution (radish : brine solution = 1 : 2) at $15^{\circ}C$ for 5hrs. The time required to reach the optimum salt concentration (3.0%) was different among cultivars; in the 10% brine solution, 5hr for 'Taeback', 4hr for 'Bakja', 3hr for 'Kwandong' and 'Bakbong', 2hr for 'Bagkwang'. Generally, it was observed that it took shorter salting time at higher concentration of brine solution. While the highest value of weight loss of kakdugi radish cubes was observed with 'Bagkwang', the lowest, 'Taeback'. There was a decrease of pH of kakdugi radish during salting; while 'Bakja' showes little change in pH, 'Bagkwang' shows large decrease of pH. Hardness and fracturability decreased during salting; the highest value of hardness was observed with 'Taeback', the lowest, 'Bagkwang' has the highest moisture content, the lowest soluble solid content and hardness. There was a similarity of characteristics of kakdugi radish cube between two cultivars, 'Taeback' and 'Bakja', as well as 'Bagkwang', and those of 'Kwandong' and 'Bakbong' were between two types of cultivars.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.199-208
• /
• 2023

Taguchi method is one of the most popular approaches for design optimization such that performance characteristics become robust to uncontrollable noise variables. However, most previous Taguchi method applications have addressed a single-characteristic problem. Problems with multiple characteristics are more common in practice. The multi-criteria decision making(MCDM) problem is to select the optimal one among multiple alternatives by integrating a number of criteria that may conflict with each other. Representative MCDM methods include TOPSIS(Technique for Order of Preference by Similarity to Ideal Solution), GRA(Grey Relational Analysis), PCA(Principal Component Analysis), fuzzy logic system, and so on. Therefore, numerous approaches have been conducted to deal with the multi-characteristic design problem by combining original Taguchi method and MCDM methods. In the MCDM problem, multiple criteria generally have different measurement units, which means that there may be a large difference in the physical value of the criteria and ultimately makes it difficult to integrate the measurements for the criteria. Therefore, the normalization technique is usually utilized to convert different units of criteria into one identical unit. There are four normalization techniques commonly used in MCDM problems, including vector normalization, linear scale transformation(max-min, max, or sum). However, the normalization techniques have several shortcomings and do not adequately incorporate the practical matters. For example, if certain alternative has maximum value of data for certain criterion, this alternative is considered as the solution in original process. However, if the maximum value of data does not satisfy the required degree of fulfillment of designer or customer, the alternative may not be considered as the solution. To solve this problem, this paper employs the desirability function that has been proposed in our previous research. The desirability function uses upper limit and lower limit in normalization process. The threshold points for establishing upper or lower limits let us know what degree of fulfillment of designer or customer is. This paper proposes a new design optimization technique for multi-characteristic design problem by integrating the Taguchi method and our desirability functions. Finally, the proposed technique is able to obtain the optimal solution that is robust to multi-characteristic performances.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.7 no.3
• /
• pp.87-95
• /
• 2008

The purpose of this study is to provide a decision support to select an appropriate rapid prototyping(RP) machine that suits the application of a part. Selection factors include concept model, form/fit/functional model, pattern model for molding, material property, build time and part cost that greatly affect the performance of RP machines. However, the selection of a RP is not an easy decision because they are uncertain and vague. For this reason, the aim of this research is to propose hybrid multiple attribute decision making approaches to effectively evaluate RP machines. In addition, because subjective considerations are relevant to selection decision, a fuzzy logic approach is adopted. The proposed selection procedure consists of several steps. First, we identify RP machines that the users consider. After constructing the evaluation criteria, we calculate the weights of the criteria by applying the fuzzy Analytic Hierarchy Process(AHP) method. Finally, we construct the fuzzy Technique of Order Preference by Similarity to Ideal Solution(TOPSIS) method to achieve the ranking order of all machines providing the decision information for the selection of RP machines.

• KIPS Transactions on Software and Data Engineering
• /
• v.3 no.11
• /
• pp.495-502
• /
• 2014

An effective solution to the variation on scale and rotation is required to recognize contactless palmprint. In this study, we firstly minimize the variation by extracting a region of interest(ROI) according to the size and orientation of hand and normalizing the ROI. This paper proposes a contactless palmprint recognition method based on KLT(Kanade-Lukas-Tomasi) feature points. To detect corresponding feature points, texture in local regions around KLT feature points are compared. Then, we recognize palmprint by measuring the similarity among displacement vectors which represent the size and direction of displacement of each pair of corresponding feature points. An experimental results using CASIA public database show that the proposed method is effective in contactless palmprint recognition. Especially, we can get the performance of exceeding 99% correct identification rate using multiple Gabor filters.

• Journal of Magnetics
• /
• v.21 no.3
• /
• pp.468-475
• /
• 2016

In this article, entropy generation on MHD Williamson nanofluid over a porous shrinking sheet has been analyzed. Nonlinear thermal radiation and chemical reaction effects are also taken into account with the help of energy and concentration equation. The fluid is electrically conducting by an external applied magnetic field while the induced magnetic field is assumed to be negligible due to small magnetic Reynolds number. The governing equations are first converted into the dimensionless expression with the help of similarity transformation variables. The solution of the highly nonlinear coupled ordinary differential equation has been obtained with the combination of Successive linearization method (SLM) and Chebyshev spectral collocation method. Influence of all the emerging parameters on entropy profile, temperature profile and concentration profile are plotted and discussed. Nusselt number and Sherwood number are also computed and analyzed. It is observed that entropy profile increases for all the physical parameters. Moreover, it is found that when the fluid depicts non-Newtonian (Williamson fluid) behavior then it causes reduction in the velocity of fluid, however, non-Newtonian behavior enhances the temperature and nanoparticle concentration profile.

• Proceedings of the Korean Society of Food Science and Nutrition Conference
• /
• 2004.11a
• /
• pp.203-208
• /
• 2004

The Family of Man was a 1955 photographic exhibition that depicted normal people in all walks of life from around the world. The viewer was visually confronted with the similarity of all people. The people of the world are now facing common health challenges as a result of changing lifestyles and increasing healthcare costs. Dietary supplements have the potential to be part of the solution. Dietary supplementation with antioxidant vitamins may be the most effective intervention for preventing the onset of Alzheimer's disease in the rapidly expanding elderly population - and at a very low cost. AIDS is devastating much of the developing world, where few resources are available to treat it victims. Inexpensive multivitamin sup-plements have been demonstrated to slow the progression of AIDS, reduce the death rate, reduce AIDS-related morbidity, improve T cell counts, and reduce viral loads. Careful economic analysis demonstrate that calcium and folic acid supplementation could reduce healthcare costs in the USA by $13.9 billion and $1.3 billion, respectively. Most supplements with therapeutic potential have not been subjected to sufficiently rigorous research to permit unqualified public health recommendations. Carefully directed research is needed to identify the supplements with the greatest potential and to verify their safety and efficacy.

• Genomics & Informatics
• /
• v.12 no.1
• /
• pp.21-34
• /
• 2014

A visual analysis approach and the developed supporting technology provide a comprehensive solution for analyzing large and complex integrated genomic and biomedical data. This paper presents a methodology that is implemented as an interactive visual analysis technology for extracting knowledge from complex genetic and clinical data and then visualizing it in a meaningful and interpretable way. By synergizing the domain knowledge into development and analysis processes, we have developed a comprehensive tool that supports a seamless patient-to-patient analysis, from an overview of the patient population in the similarity space to the detailed views of genes. The system consists of multiple components enabling the complete analysis process, including data mining, interactive visualization, analytical views, and gene comparison. We demonstrate our approach with medical scientists on a case study of childhood cancer patients on how they use the tool to confirm existing hypotheses and to discover new scientific insights.

• ETRI Journal
• /
• v.40 no.4
• /
• pp.511-521
• /
• 2018

The ability to realize human-motion imitation using robots is closely related to developments in the field of artificial intelligence. However, it is not easy to imitate human motions entirely owing to the physical differences between the human body and robots. In this paper, we propose a work chain-based inverse kinematics to enable a robot to imitate the human motion of upper limbs in real time. Two work chains are built on each arm to ensure that there is motion similarity, such as the end effector trajectory and the joint-angle configuration. In addition, a two-phase filter is used to remove the interference and noise, together with a self-collision avoidance scheme to maintain the stability of the robot during the imitation. Experimental results verify the effectiveness of our solution on the humanoid robot Nao-H25 in terms of accuracy and real-time performance.

• Molecules and Cells
• /
• v.25 no.1
• /
• pp.138-141
• /
• 2008

HP0892 (SwissProt/TrEMBL ID O25552) is a 90-residue conserved hypothetical protein from Helicobacter pylori strain 26695, with a calculated pI of 9.38 and a molecular mass of 10.41 kDa. It belongs to the Plasmid stabilization system protein family (PF05016) in the Pfam database. Proteins with sequence similarity to HP0892 exist in Vibrio choierae, Enterococcus faecalis, Campylobacter jejuni, Streptococcus pneumoniae, Haemophilus influenzae, Escherichia coli O157. Here we report the sequence-specific backbone resonance assignments of HP0892 using multidimentional heteronuclear NMR spectroscopy. About 97.0% (422/435) of the HN, N, CO, $C{\beta}$, $C{\alpha}$ resonances of 90 residues of HP0892 were assigned. On the basis of the resonance assignments, three helical regions and four strand regions were identified using the CSI program. This study is a prerequisite for calculating the solution structure of HP0892, and will be useful for studying its interaction with other molecules.

• Journal of Korean Society for Atmospheric Environment
• /
• v.23 no.1
• /
• pp.1-13
• /
• 2007

This study was carried out to evaluate the applicability of the odor source tracking using wind field and fingerprint as a solution tool. First of all, CALMET and HYSPLIT modeling system, and database of odor discharge companies were utilized to track odor from industrial complexes. Secondly, industrial odor fingerprint was made by listing on the 19 domestic industries, and compared with foreign data to assess the representative, and thus the similarity was 86.7%. On the modeling experiment, Sihwa industrial complex did not show any difference because the matching rates of day and night were 49.5% and 50.0%, respectively. However, the Banwol and Sihwa industrial complexes did show some differences due to odor facility density. Separately, in this study, odor samples were obtained from 10 odor discharging companies, located in the Sihwa and Banwol industrial complexes, They were compared with the results of odor tracking modeling. The matched companies were 4 of 10 by three cases of tracking, while the fingerprint and industry of odor monitoring networks and companies matched each other. Therefore, this study confirmed the approach applicability of source tracking system using the fingerprint.