• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 ITC-CSCC -2
• /
• pp.814-817
• /
• 2002

High-dimensional data with two or more attributes are considered. A typical example of such data is face images of various individuals and expressions. In these cases, collecting a complete data set is often difficult since the number of combinations can be large. In the present study, we propose a method to interpolate data of missing combinations from other data. If this becomes possible, robust recognition of multiple attributes is expectable. The key of this subject is appropriate extraction of the similarity that the face images of same individual or same expression have. Bilinear model ［1］has been proposed as a solution of this subjcet. However, experiments on application of bilinear model to classification of face images resulted in low performance ［2］. In order to overcome the limit of bilinear model, in this research, a nonlinear model on a neural network is adopted and usefulness of this model is experimentally confirmed.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.37-40
• /
• 2001

This paper describes the selection and evaluation of RP processes. Major rapid prototyping processes such as SLS, SLA, FDM and LOM, which are wide spread in use are selected. A test part, which includes various primitives, is designed in order to evaluate these RP processes. Measurement of the test part is automated by using a CMN program. To visualize and analyze measured data, Microsoft Access and Visual C++ are used. Also, from measured data obtained, TOPSIS, one of the decision making methods, and Shannon Entropy is used to select an appropriate RP process for specific application.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2001년도 춘계학술대회논문집
• /
• pp.751-756
• /
• 2001

An experimental model of the advanced mixing control in the parallel supersonic-subsonic mixing jet (M$_1$=1.78 and M$_2$=0.30) is numerically simulated. An oscillating wall boundary condition is used as the modeling of a wall cavity for mixing enhancement. The obtained pitot pressure distributions along cross sections at the developing region of the turbulent jets are validated from the good agreement with equivalent experimental data. The similarity solution of dimensional analysis also coincides with this numerical result at the self-similar region sufficiently far from the jet exit.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.446-451
• /
• 2004

Over testing problems of satellites and theirs components have been issued due to their effects on satellite development cost and schedule. Force limited vibration tests were introduced as solution of the problems in 1980s. Over testing phenomena occurs due to the lack of similarity on interface impedance. Force limited vibration tests control interface force to simulate actual interface impedance. In this research, force limited vibration tests are applied on two satellites environmental tests. Force limits are calculated by using TDFS method and Semi-Empirical method. Four force sensors are employed to control interface force. The tests prove that force limited control reduced maximum interface acceleration in order of 3.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2012년도 춘계학술대회 논문집
• /
• pp.388-393
• /
• 2012

본 논문에서는 공간상의 서로 다른 영역에 소리를 집중하거나 파면의 전파 형상을 제어 가능케 하는 음향 밝기 및 대조 제어의 기초 이론을 서로 다른 제한 조건의 관점에서 살펴보았다. 밝기 및 대조 제어는 소형 모바일 기기에서 DTV, 항공기 실내 등 다양한 분야에서 활발히 연구되고 있으며, 향후 홈환경과 같이 음향반사가 심한 공간에서도 사적이고 쾌적한 음향청취 공간을 제공하는데 활용될 수 있다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회A
• /
• pp.1800-1805
• /
• 2008

A "finite volume method" is proposed to predict heat transport in a spherical enclosure at micro/nanoscale with the Boltzmann transport equation (BTE). The gray version of the BTE with the relaxation time approximation has been applied. Pointing out similarity between radiative transfer equation (RTE) and BTE, the mapping process in RTE is adopted to treat the angular derivative term and linear algebraic discretization equation is derived by using the established method which is used in 2-D BTE in cartesian coordinates. The simulation results are compared to exact solution to RTE for various acoustic thicknesses and ratio of radii. The comparison shows that this method is logical and accurate, and it is possible to easily adopt various models in spherical BTE.

• Advances in materials Research
• /
• 제5권3호
• /
• pp.141-169
• /
• 2016

In this paper, an efficient and simple refined theory is presented for buckling analysis of functionally graded plates. The theory, which has strong similarity with classical plate theory in many aspects, accounts for a quadratic variation of the transverse shear strains across the thickness and satisfies the zero traction boundary conditions on the top and bottom surfaces of the plate without using shear correction factors. The mechanical properties of functionally graded material are assumed to vary according to a power law distribution of the volume fraction of the constituents. Governing equations are derived from the principle of minimum total potential energy. The closed-form solutions of rectangular plates are obtained. Comparison studies are performed to verify the validity of present results. The effects of loading conditions and variations of power of functionally graded material, modulus ratio, aspect ratio, and thickness ratio on the critical buckling load of functionally graded plates are investigated and discussed.

• International Journal of Automotive Technology
• /
• 제8권1호
• /
• pp.83-91
• /
• 2007

Nowadays, the increasing global competition forces manufacturing enterprises to apply new technologies such as laser welding to manufacturing of their products. In case of automotive industries, they interest in assembly system for BIW (Body in White) carrying out laser welding. In this paper, the method of implementation for digital laser welding assembly system is proposed. Based on the requirements of assembly tasks obtained through product analysis, process modeling is executed by using the IDEF0 and UML model. For digital assembly system, the selected components are modeled by using 3D CAD tools. According to the system configuration strategy, lots of the alternative solutions for the assembly system of welding side panels are generated. Finally, the optimal laser welding system is chosen by the evaluation of the alternative solutions with TOPSIS (Technique for Order Preference by Similarity to Ideal Solution) method.

• 대한기계학회논문집
• /
• 제13권1호
• /
• pp.161-169
• /
• 1989

본 연구의 목적의 하나는 기본 유동장과 온도장의 비평행성을 고려함으로써 등온 수직 원통표면 바깥에서의 자연대류 유동의 파형 불안정성에 대한 안정성 문제를 구성하는 것이다. 다음에는 기본 유동양들의 평행성을 고려한 단순화 가정하에 수치해석을 수행하여 안정성 특성에 대한 원통 곡률의 영향을 정성적으로 검토하는 것이다.

• 한국산업융합학회 논문집
• /
• 제12권1호
• /
• pp.35-42
• /
• 2009

In Taguchi's quadratic expected loss function used as robustness metric of performance characteristics, the mean and variance contributions are confounded. The consolidation of the mean and variance in the expected loss function may not always be the ideal approach. This paper presents a procedure for multi-attributes design optimization, where the mean and variance of performance characteristics are considered as separate attributes having designer's relative preferences for them and Technique for Order Preference by Similarity to Ideal Solution(TOPSIS) is introduced to attain robust optimal design. The effectiveness of proposed approach is shown with an example of a weld line minimization problem in the injection molding process.