• Journal of Power System Engineering
• /
• v.9 no.3
• /
• pp.44-49
• /
• 2005

The aerodynamic performance of an indoor room air-conditioner using a cross-flow fan is strongly influenced by the various design factors of a rear-guider and a stabilizer. The purpose of this study is to investigate the effects of a rear-guider and a stabilizer on the aerodynamic performance in the maximum flowrate range of a cross-flow fan. The design factors considered in this study are a rear-guider clearance, a stabilizer cutoff clearance, and a stabilizer setup angle, respectively. Aerodynamic performances including maximum flowrate and power show the biggest magnitude distribution in the case of $45^{\circ}$, the stabilizer setup angle as well as nearly similar magnitude distribution regardless of the stabilizer cutoff clearances. Moreover, the more a rear-guider clearance increases, the more the magnitude of maximum flowrate and power increases.

• Journal of Multimedia Information System
• /
• v.5 no.2
• /
• pp.87-90
• /
• 2018

Various approaches have been proposed to convert low dynamic range (LDR) to high dynamic range (HDR). Of these approaches, the Multi Scale Fusion (MSF) algorithm based on Laplacian pyramid decomposition is used in many applications and demonstrates its usefulness. However, the pyramid fusion technique has no means for controlling the luminance component because the total number of pixels decreases as the pyramid rises to the upper layer. In this paper, we extract the reflection light of the image based on the Retinex theory and generate the weight map by adjusting the reflection component. This weighting map is applied to achieve an MSF-like effect during image fusion and provides an opportunity to control the brightness components. Experimental results show that the proposed method maintains the total number of pixels and exhibits similar effects to the conventional method.

• Bulletin of the Korean Chemical Society
• /
• v.22 no.9
• /
• pp.994-998
• /
• 2001

Ni, Fe and NiFe alloy thin films were electrodeposited at a polycrystalline Au surface using a range of electrolytes and potentials. Coulometry and EQCM were used for real-time monitoring of electroplating efficiency of the Ni and Fe. The plating efficiency of NiFe alloy thin films was computed with the aid of ICP spectrometry. In general, plating efficiency increased to a steady value with deposition time. Plating efficiency of Fe was lower than that of Ni at -0.85 and -1.0 V but the efficiency approached to the similar plateau value to that of Ni at more negative potentials. The films with higher content of Fe showed different stripping behavior from the ones with higher content of Ni. Finally, compositional data and real-time plating efficiency are presented for films electrodeposited using a range of electrolytes and potentials.

• Bulletin of the Korean Chemical Society
• /
• v.8 no.6
• /
• pp.462-465
• /
• 1987

The aggregation between cationic and anionic surfactants was studied by turbidimetric and nephelometric methods with emphasis on facile analysis of the surfactants and understanding of the mixed micellization. The turbidimetric titration of sodium dodecylsulfate (SDS) with cetyltrimethylammonium bromide (CTAB) or cetylpyridinium bromide (CPB) showed maximum turbidity at equimolar composition in the SDS concentration range of 0.1-0.9 mM. The nephelometric titration of the same systems extended the limit of analysis to 0.001 mM. The sodium salts of decylsulfate and sulfonate gave similar maxima, but not at equimolar composition. The coexistence of equimolar aggregates and mixed micelles were shown over broad composition range. The aggregation and mixed micellization of the anionic/cationic surfactants mixtures depended sensitively on the hydrophobic character of the surfactants.

• Bulletin of the Korean Mathematical Society
• /
• v.56 no.3
• /
• pp.569-583
• /
• 2019

Given a graph G, the Motzkin and Straus formulation of the maximum clique problem is the quadratic program (QP) formed from the adjacent matrix of the graph G over the standard simplex. It is well-known that the global optimum value of this QP (called Lagrangian) corresponds to the clique number of a graph. It is useful in practice if similar results hold for hypergraphs. In this paper, we attempt to explore the relationship between the Lagrangian of a hypergraph and the order of its maximum cliques when the number of edges is in a certain range. Specifically, we obtain upper bounds for the Lagrangian of a hypergraph when the number of edges is in a certain range. These results further support a conjecture introduced by Y. Peng and C. Zhao (2012) and extend a result of J. Talbot (2002). We also establish an upper bound of the clique number in terms of Lagrangians for hypergraphs.

• Journal of the East Asian Society of Dietary Life
• /
• v.23 no.6
• /
• pp.799-809
• /
• 2013

This study was performed to determine the optimal composition of a makgeolli administered nuruk, water and Asparagus cochinchinensis. The experiment was designed base on BBD (box-behnken design), and an evaluation was carried out by means of RSM (response surface methodology), which included 15 experimental points with 3 replicates for the three independent variables nuruk, water and Asparagus cochinchinensis. The nuruk levels were tested in a range of 10~30 g, the water levels in a range 120~180% and Asparagus cochinchinensis was tested within a range of 2~6% by the weight of cooked-rice. Using the F-test, brix and appearance were expressed as a linear model, whereas the pH, acidity, DPPH radical scavenging, L-value, savory taste, taste, fresh aroma, after swallow and overall acceptability were expressed as a quadratic model. Increased amount of Asparagus cochinchinensis led to the reduction of the sensory scores for appearance, flavor, taste, texture and overall quality. The optimum formulation by numerical and graphical method were similar: nuruk 24.50 g, water 174.95% and Asparagus cochinchinensis 2.40%.

• Journal of Powder Materials
• /
• v.18 no.6
• /
• pp.488-495
• /
• 2011

This study was performed to fabricate the porous titanium foam by space holder method using NaCl powder, and to evaluate the effect of NaCl volume fractions (33.3~66.6 vol.%) on the porosities, compressive strength, Young's modulus and permeability. For controlling pore size, CP titanium and NaCl particles were sieved to different size range of 70~150 ${\mu}m$ and 300~425 ${\mu}m$ respectively. NaCl of green Ti compact was removed in water followed by sintered at $1200^{\circ}C$ for 2 hours. Total porosities of titanium foam were in the range of 38-70%. Pore shape was a regular hexahedron similar that of NaCl shape. Porous Ti body showed that Young's modulus and compressive strength were in the range of 0.6-6 GPa and 8-127 MPa respectively. It showed that pore size and mechanical properties of Ti foams was controllable by NaCl size and volume fractions.

• Journal of Korea Multimedia Society
• /
• v.21 no.6
• /
• pp.698-704
• /
• 2018

When the new ammunition is designed, it is necessary to confirm in advance how long the target distance is depends on the shape and weight of the designed ammunition. Therefore we can use commercial software such as PRODAS to predict the target distance in the design stage. This commercial software has aerodynamic data for various ammunition shape and calculates the target range by calculating the kinetic equations of the ammunition using the aerodynamic data most similar to the designed ammunition. The ammunition for predicting the target distance through software such as PRODAS is a non-guided ammunition that has no control after launch but the glide type ammunition is guided and control ammunition. So it is predicts the state of ammunition after the launch. A new type of simulator is needed to analyze the maximum range and to verify the onboard guided and control algorithm. The simulator constructed in this paper is an optimized simulator for glide type ammunition. Unlike unmanned aircraft and guided missiles. The rotation characteristics of the ammunition are considered and the navigation initialization algorithm is applied. The constructed simulator confirmed the performance by performing maximum range analysis of glide type ammunition.

• Journal of Environmental Health Sciences
• /
• v.33 no.5
• /
• pp.451-455
• /
• 2007

This study was performed to evaluate the effects of input ratios of bulking material in aerobic composting of food wastes on variation of colony forming units(CFU) of fungi. Wood chips were used as a bulking material. Volume ratios of food wastes to wood chips in reactor of Control, WC-1 and WC-2 were 10/0, 10/5 and 10/10, respectively. Reactors were operated for 24 days with I hour stirring by 1rpm and 2 hours of the forced aeration rate of $80L/min{\cdot}m^3$ per day. WC-2 reached high temperature range faster than WC-1, and the maximum temperature of WC-2 was higher than that of WC-1. WC-2 reached high pH range faster than WC-1. and the maximum pH of WC-2 was higher than that of WC-1. WC-2 reached high Log(CFU/gram) range faster than WC-I, and the maximum Log(CFU/gram) of WC-2 was higher than that of WC-1. These all mean that the reaction velocity of composting of WC-2 was faster than that of WC-1. The profile of fungi changes in Log(CFU/gram) was similar to that of temperature changes (r=0.8861) not pH changes (r=0.1631).

• Journal of the Korean Society for Precision Engineering
• /
• v.24 no.8 s.197
• /
• pp.138-143
• /
• 2007

Microstereolithography technology is similar to the conventional stereolithography process and enables to fabricate a complex 3D microstructure. This is divided into scanning and projection type according to aiming at precision and fabrication speed. The scanning MSL fabricates each layer using position control of laser spot on the resin surface, whereas the projection MSL fabricates one layer with one exposure using a mask. In the projection MSL, DMD used to generate dynamic pattern consists of $1024{\times}768$ micromirrors which have $13.68{\mu}m$ per side. The fabrication range and resolution are determined by the field of view of the DMD and the magnification of the projection lens. If using the projection lens with high power, very fine microstructures can be fabricated. In this paper, the projection MSL system adapted to a large surface for array-type fabrication is presented. This system covers the meso range, which is defined as the intermediate range between micro and macro, with a resolution of a few ${\mu}m$. The fabrication of array-type microstructures has been demonstrated to verify the performance of implemented system.