• Macromolecular Research
• /
• 제13권3호
• /
• pp.223-228
• /
• 2005

In the present work, a low-density polyethylene (LDPE) composite, filled with Zn-ion coated structural silica encapsulated with the diglycidyl ether of bisphenol-A (DGEBA), was synthesized using the conventional melt-blending technique in a sigma internal mixer. The catalytic activity of the Zn-ions (originating from the structural silica) towards the oxirane group (diglycidyl ether of bisphenol-A (DGEBA): encapsulating agent) was assessed by infrared spectroscopy. Two composites, each with a filler content of $2.5 wt\%$ were developed. The first one was obtained by melt blending the Zn-ion coated structural silica with LDPE in a co-rotating sigma internal mixer. The second one was obtained by melt blending the same LDPE, but with DGEBA encapsulated Zn-ion coated structural silica. Epoxy resin encapsulation of the Zn-ion coated structural silica resulted in its having good interfacial adhesion and a homogeneous dispersion in the polymer matrix. Furthermore, the encapsulation of epoxy resin over the Zn-ion coated structural silica showed improvements in both the mechanical and thermal properties, viz. a $33\%$ increase in the elastic modulus and a rise in the onset degradation temperature from 355 to $371^{\circ}C$, in comparison to the Zn-ion coated structural silica.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2023년도 봄 학술논문 발표대회
• /
• pp.99-100
• /
• 2023

In this study, an approach has been made to understand the effect of encapsulation thickness of the nanoencapsulated PCMs on the phase transition kinetics. Paraffin is encapsulated by silica via single pot polycondensation reaction. Different ratios of silica precursor are chosen to encapsulate paraffin. The obtained encapsulated PCMs are identified as nano sized, as well as with increasing silica precursor, thicker silica encapsulations have been manifested with shrinking core diameter. The synthesized PCMs are characterized using various characterization techniques. Isochronal kinetic studies are done in differential scanning calorimeter (DSC) to understand about their phase transformation behaviors. This study can appreciate the cognition of the large-scale applications of PCMs into the building constructions as well as the fundamental conception on the phase transition kinetics of PCMs can also be amended.

• 공업화학
• /
• 제22권3호
• /
• pp.328-331
• /
• 2011

ZnSe 양자점을 AOT 마이크로에멀전을 이용해서 제조하였으며, tetraethyl orthosilicate (TEOS)를 직접 주입하는 방법으로 실리카에 담지된 ZnSe 양자점 소재를 얻었다. 양자점이 실리카에 담지되었을 때, 상대적으로 고른 구 형태의 ZnSe 양자점을 얻을 수 있었고 그 크기는 약 7 nm이었다. 아울러 마이크로에멀전상의 ZnSe 양자점이 실리카에 담지되면 photoluminescence 효율은 8%에서 1.1%로 감소하였다. 그러나 금표면에 실리카에 담지된 ZnSe 고체 박막을 형성시켰을 때, 양자점의 광학안정성은 크게 증가함을 알 수 있었다. 특히 ZnSe 양자점은 카드뮴이 없어 독성이 작으며 기존의 ZnSe 제조 시 Se 전구체로 사용하는 맹독성의 $H_2Se$ 가스나 높은 반응 온도를 필요로 하지 않는다. 따라서 바이오센서용 등으로 사용이 가능한 실리카에 담지된 ZnSe 양자점을 안전하고 경제적인 방법으로 생산할 수 있는 방법을 제시할 수 있었다.

• 한국응용과학기술학회지
• /
• 제28권2호
• /
• pp.185-195
• /
• 2011

Carbon nanotube(CNT) plays an essential role in various fields of nano based science and technology. Recently, silica coated CNT composites are interested because they are useful for the optical, magnetical, and catalytic applications. In this report, carboxyl groups were introduced on the MWCNT using nitric acid. In order to maximize the silica encapsulation efficiency, carboxyl groups of MWCNT reacted with a silane coupling agent were used to prepare silica coated MWCNT. Due to their strong interaction between modified MWCNT and TEOS. Silica layer with a controllable thickness was achieved. Silica coated MWCNT were further utilized as the template for the synthesis of hollow silica nanotubes after $800^{\circ}C$ calcination.

• 대한전자공학회논문지
• /
• 제18권5호
• /
• pp.22-29
• /
• 1981

게이트절연층을 위한 HCI 열처리법 텅그스텐 metallization 및 fumed silica epoxy를 쓴 다중층 encapsulation 기술을 감이온 전장효과 트랜지스터(ISFET) 제조에 활용하고 이의 동작특성을 조사하였다. 또 ISFET를 위한 이론적 모형을 제시하고 이 것이 실험사실과 잘 일치함을 보였다. 제조된 ISFET는 빠른 반응, 긴 수명 및 작은 이압특성을 나타내었는데, 특히 안정부는 크게 개선되었다.

• 산업기술연구
• /
• 제23권A호
• /
• pp.199-206
• /
• 2003

The charcoal-encapsulated methyl silica microcapsules were prepared by a O/W microemulsion sol-gel method, and the adsorption properties on aquatic humic acid were investigated. The capsules prepared were spherical, $100{\sim}1000{\mu}m$ in size. The size distribution was controllable by adjusting the size of charcoal powder, charcoal/methyl silica ratio, and agitating speed in O/W sol-gel process. Adsorption efficiency of charcoal for aquatic humic acid was decreased after encapsulation by methyl silica shell. The decreased adsorption efficiency can be dependent on the decrease of the BET surface area and pore volume after encapsulation. Diffusion properties of humic acid through the capsule shell also played an important role on adsorption efficiency. Therefore, the reasonable target pollutants for the capsules can be VOC or odor molecules which can overcome diffusion barrier through shell of capsules in air condition. Functionalization methods for the charcoal-encapsulated $CH_3(SiO)_n$ microcapsules by incorporation of $TiO_3$ as a phtocatalytic function and by incorporation of inorganic pigment as a color function were also investigated. $TiO_2$ coating properties were controllable by adjusting pH, temperature, and the concentration of $TiOSO_4$. In XRD measurement, the crystal form of the coated $TiO_2$ was anatase. For the colorization of the capsules, inorganic pigments were more efficient than organic dyes, and various color was introduced to the capsules using inorganic pigments.

• ETRI Journal
• /
• 제27권3호
• /
• pp.337-340
• /
• 2005

A spot-size converted Fabry-Perot laser diode (LD) was flip-chip bonded to a silica-terraced planar lightwave circuit(PLC) platform to examine the effect of the silica terrace on the heat dissipation of the LD module. From the measurement of the light-current characteristics, it was discovered that the silica terrace itself is not a strong thermal barrier, but the encapsulation of the integrated LD with an index-matching polymer resin more or less deteriorates the heat dissipation.

• Bulletin of the Korean Chemical Society
• /
• 제24권4호
• /
• pp.499-503
• /
• 2003

Encapsulation of L-ascorbic acid (vitamin C) within a bio-compatible layered inorganic material was achieved by coprecipitation reaction, in which the layered inorganic lattice and its intercalate of vitamin C are simultaneously formed. The nano-meter sized powders of vitamin C intercalate thus prepared was again encapsulated with silica nano-sol to form a nanoporous shell structure. This ternary nanohybrid of vitamin Clayered inorganic core-$SiO_2$ shell exhibited an enhanced storage stability and a sustained releasing of vitamin C. Furthermore, the nano-encapsulation of vitamin C with inorganic mineral was very helpful in delivering vitamin C molecules into skin through stratum corneum, facilitating transdermal penetration of vitamin C in topical application.

• 한국자원식물학회:학술대회논문집
• /
• 한국자원식물학회 2002년도 제9차 국제심포지움 및 추계정기학술발표회
• /
• pp.53-53
• /
• 2002

Shoot tips of in vitro propagated plantlets were cryopreserved using encapsulation/dehydration procedures. Shoot tips were excised under filter sterilized antioxidants solution (0.2M phosphate buffer, pH 5.7 supplemented with 5g/1 ascorbic acid and 15g/1 sodium borate). They were drawn up into a sterile 10 $\textrm{cm}^3$disposable pipette and were dropped into the culture medium with 2.5w/v Na-alginate, then into 100mM CaCl$_2$.2$H_2O$. Encapsulated shoot tips were transferred into 10㎤ of liquid culture medium with a range of sucrose concentrations (0.25-1.0M) and were incubated in dark for 24 hours in 18C at 40rpm. Beads were then dehydrated in silica gel for different time intervals (1-24 hours). Then they were freeze dried either rapidly (plunge directly into liquid N2 or in two stages (samples were kept at 20C for 10 minutes, then reduced to 35C at 1C per minute. Then, plunge into liquid $N_2$). The influence of sucrose and silica gel pre-treatment on pre- and post-freeze shoot growth was examined.(중략)

• 공업화학
• /
• 제26권3호
• /
• pp.362-365
• /
• 2015

본 연구에서는 polyoxyethylenenonylphenylether (NP5) 계면활성제와 sodium bis(2-ethylhexyl) sulfosuccinate (AOT) 계면활성제가 형성하는 두 종류의 W/O 마이크로에멀젼을 이용해서 실리카에 담지된 ZnSe 양자점을 제조하였다. 본 방법으로 3 nm 크기의 cubic zinc blende 결정 구조를 갖는 ZnSe 입자를 합성하였으며 약 20 nm 크기의 실리카 입자에 효과적으로 담지 시킬 수 있었다. 합성된 입자의 photoluminescence (PL) 주변 온도 의존성을 $30^{\circ}C$에서 $60^{\circ}C$ 범위에서 확인한 결과, 온도가 증가함에 따라 PL intensity가 감소하였으며 PL intensity와 온도와는 높은 상관관계를 나타내었다. 아울러 PL intensity와 온도의 상관관계는 온도를 낮은 곳에서 올려가며 측정한 경우와 반대로 낮추며 측정한 경우 같은 상관도를 나타내어 온도 의존성이 가역적임을 알 수 있었다. 그 결과 실리카에 담지된 ZnSe 양자점이 온도 센서로 사용될 수 있는 잠재적인 매체임을 확인하였다.