• Elastomers and Composites
• /
• v.47 no.1
• /
• pp.18-22
• /
• 2012

The silica-silica interaction parameter (${\alpha}_F$) of the silane treated silica filled natural rubber (NR) compound was investigated. The measured ${\alpha}_F$ values using mass fraction method following Wolff's theory were compared with volume fraction method. As silica concentration increased, the ${\alpha}_F$ value increased for both methods. The value of ${\alpha}_F$ expressed as volume fraction was higher than that of mass fraction, which resulted in large gaps between ${\alpha}_F$ values. The effect of accelerator (MBT) concentration on ${\alpha}_F$ values was compared.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.07b
• /
• pp.1113-1115
• /
• 2002

Mesoporous silica, MCM-41, was synthesized by sol-gel method. The organic structure-directing agent must be removed to make the desired proes. To achieve this, alternative calcination method using microwave oven was adapted to this removal stage. Microwave calcination was shown to provide a novel, rapid and inexpensive method of praparing nanoporous material. It was studied how the porous structure, surface area and pore size distribution were changes under microwave calcination.

• Proceedings of the Korean Society of Marine Engineers Conference
• /
• 2000.11a
• /
• pp.143-151
• /
• 2000

Dissolved silica is make some critical trouble at steam turbine. And, we must measure it to ppb level. We were looking for the best measuring method of the silica. Via this study, we could found it in the N-IR spectroscopy technology. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of $NH_3$. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for double beam type structure. And we obtain a good result. In the result, it have been discuss that conduct a test of $NH_3$ effect.

• 연구논문집
• /
• s.30
• /
• pp.43-56
• /
• 2000

N-IR spectroscopy technology is very useful. And, the technology has wide application range. In the range, we know that single beam type silica analyzer has some handicap. So we were studied Splitted beam type silica analyzer. This dissertation have been discuss about system structure, system fundamentals and performance test. At the test, we were study in the spectral interference of NH3. We know that existing system had some problem. It is structural frailties of single beam type. Therefore we were study for Splitted beam type structure. And we obtain a good result. We have $\pm$5% accuracy and 0.5 ppb level measuring range. But, we have a question. It is ppt level measuring technology by the laser beam spectroscopy.

• Bulletin of the Korean Chemical Society
• /
• v.32 no.1
• /
• pp.186-190
• /
• 2011

Periodically ordered mesoporous manganese oxides were synthesized in a single and double replication procedure. Mesoporous SBA-15 and -16 silica and their reverse replica carbons were successively used as hard templates. The silica and carbon pore systems were infiltrated with $Mn(NO_3)_2{\cdot}xH_2O$ or $Mn(AcAc)_2$, which was then converted to $Mn_2O_3$ at 873 K; the silica and carbon matrix were finally removed by NaOH solution or calcinations in air. The structure of the mesoporous $Mn_2O_3$, using a carbon template, corresponds to that of the original SBA-15 and SBA-16 silica. The products consist of hexagonally arranged cylindrical mesopores with crystalline pore walls or cubic mesoporous pores. The structure of replica has been confirmed by XRD, TEM analysis, and its electrochemical properties were tested with cyclic voltammetry. Formation of $Mn_2O_3$ inside the mesoporous carbon pore system showed much improved electrical properties.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2008.11a
• /
• pp.6-7
• /
• 2008

Composite nanoparticles of silica-polyaniline were synthesized and tested as an electrochromic material. For the optical application, the size of the nanoparticle was intended to be less than 100 nm in diameter. The synthesis was done by using a microemulsion synthesis method where the silica-polyaniline composite nanoparticle was obtained by dispersing two acidic aqueous phases containing aniline and polymerization agent, respectively. Microstructure analysis such as TEM and BET surface area measurement showed the possibility that polyaniline is incorporated in porous silica structure. The composite structure of the particle was proved to enhance chemical stability of the prepared electrochromic film.

• Journal of Astronomy and Space Sciences
• /
• v.1 no.1
• /
• pp.35-39
• /
• 1984

The design of the reusable thermal protection system for the space shuttle orbiter using silica tile played one of key roles in the successful flight of the Columbia and subsequent space shuttles. The basic design goals for this thermal protection system were identified. Manufacturing procedures for the silica tile and the structure of the tile system were also described.

• Polymer(Korea)
• /
• v.38 no.4
• /
• pp.411-416
• /
• 2014

Due to the polar characteristics of silica compared to carbon black, the degree of silica dispersion, which affects the mechanical properties of rubber compounds, is an important issue. Wolff first introduced the in-rubber structure of particles (${\alpha}_F$) to express the structure development in the compounds; however, with the introduction of bifunctional silanes, his theory could not explain the 3-dimensional network structure of the compounds. Later his theory was expanded to express the composite interaction parameter (in-rubber structure of the compound) (${\alpha}_C$), which included Wolff's filler-filler interaction parameter (${\alpha}_F$), however, there was no reported experimental result proving the theory. This research first experimentally expressed the in-rubber structure of the compound ${\alpha}_C$ (= ${\alpha}_F+{\alpha}_{FP}$(filler-silane-rubber interaction parameter) + ${\alpha}_P$ (rubber-rubber interaction parameter)) upon mono- and bifunctional silane treated silica filled natural rubber (NR) compounds. Using different structure silanes, i.e. PTES, OTES, TESPD, and TESPT, the ${\alpha}_C$ value of each compound was measured and calculated. The ${\alpha}_C$ value of TESPT treated silica filled compound was 1.64, which composed of ${\alpha}_F$ (0.99), ${\alpha}_{FP}$ (0.31), and ${\alpha}_P$ (0.34).

• Bulletin of the Korean Chemical Society
• /
• v.27 no.10
• /
• pp.1562-1566
• /
• 2006

Mesoporous silica films with three different pore sizes were prepared by using cationic surfactant, non-ionic surfactant, or triblock copolymer as structure directing agents with tetramethylorthosilicate as silica source in order to control the pore size and wall thickness. They were synthesized by an evaporation-induced self-assembly process and spin-coated on Si wafer. Mesoporous silica films with three different pore sizes of 2.9, 4.6, and 6.6 nm and wall thickness ranging from $\sim$1 to $\sim$3 nm were prepared by using three different surfactants. These materials were optically transparent mesoporous silica films and crack free when thickness was less than 1 m m. The photoluminescence spectra found in the visible range were peaked at higher energy for smaller pore and thinner wall sized materials, consistent with the quantum confinement effect within the nano-sized walls of the silica pores.

• Journal of the Korean Ceramic Society
• /
• v.49 no.4
• /
• pp.347-351
• /
• 2012

Vermiculite-silica composites with a layered structure were fabricated by adding cellulose fibers as a pore former and by a simple uniaxial pressing and subsequent sintering process. Three different combinations of additives were used and their effects on the compressive strength and thermal conductivity of the composites were investigated. Both compressive strengths (42-128 MPa) and thermal conductivities (0.75-1.48 $W/m{\cdot}K$) in the direction perpendicular to the pressing direction (T) were higher than those (19-81 MPa and 0.32-1.04 $W/m{\cdot}K$) in the direction parallel to the pressing direction (S) in all samples. The anisotropy in both properties was attributed to the microstructural anisotropy, which was caused by the layered structure developed in the composites.