Journal of the Korean Ceramic Society (한국세라믹학회지)

The Korean Ceramic Society (한국세라믹학회)
권호 표지
DOI QR코드

DOI QR Code

Processing of Vermiculite-Silica Composites with Prefer-Oriented Rod-Like Pores

  • Eom, Jung-Hye (Functional Ceramics Laboratory, Department of Materials Science and Engineering, The University of Seoul) ;
  • Kim, Young-Wook (Functional Ceramics Laboratory, Department of Materials Science and Engineering, The University of Seoul) ;
  • Lee, Seung-Seok (Hybrid Materials Research Department, Research Institute of Industrial Science & Technology) ;
  • Jeong, Doo-Hoa (POSCO)
  • Received : 2012.05.11
  • Accepted : 2012.06.12
  • Published : 2012.07.31
Download PDF
⟨ Previous Next ⟩

Abstract

Vermiculite-silica composites with a layered structure were fabricated by adding cellulose fibers as a pore former and by a simple uniaxial pressing and subsequent sintering process. Three different combinations of additives were used and their effects on the compressive strength and thermal conductivity of the composites were investigated. Both compressive strengths (42-128 MPa) and thermal conductivities (0.75-1.48 $W/m{\cdot}K$) in the direction perpendicular to the pressing direction (T) were higher than those (19-81 MPa and 0.32-1.04 $W/m{\cdot}K$) in the direction parallel to the pressing direction (S) in all samples. The anisotropy in both properties was attributed to the microstructural anisotropy, which was caused by the layered structure developed in the composites.

Keywords

References

  1. T. Tsubaki, M. Tanaka, and O. Kamiike, "Fired Properties of Vermiculite-Clay Insulating Materials," J. Ceram. Asso. Jpn., 73 [6] 111-17 (1965). https://doi.org/10.2109/jcersj1950.73.838_111
  2. M. S. Al-Homoud, "Performance Characteristics and Practical Applications of Common Building Thermal Insulation Materials," Building Environment, 40 353-66 (2005). https://doi.org/10.1016/j.buildenv.2004.05.013
  3. H. F. Muiambo, W. W. Focke, M. Atanasova, I. Westhuizen, and L. R. Tiedt, "Thermal Properties of Sodium-Exchanged Palabora Vermiculite," Appl. Clay Sci., 50 51-7 (2010). https://doi.org/10.1016/j.clay.2010.06.023
  4. T. Tsubaki and Y. Kimura, "Thermal Properties of Heat Insulators in the Vermiculite-Phosphate System," J. Soc. Mater. Sci. Jpn., 34 228-34 (1985). https://doi.org/10.2472/jsms.34.228
  5. T. Tsubaki and M. Tanaka, "Effect of Phosphoric Acid and Phosphate Additives on the Strength and Other Properties of Heat-Insulators in the Vermiculite-Bond Clay System," J. Ceram. Asso. Jpn., 80 [3] 105-13 (1972). https://doi.org/10.2109/jcersj1950.80.919_105
  6. J. H. Eom, Y.-W. Kim, D. H. Jeong, and S. S. Lee, "Thermal Conductivity and Compressive Strength Anisotropy in Vermiculite-Ceramic Composites with Layered Structure," J. Ceram. Soc. Jpn., 119 [4] 319-21 (2011). https://doi.org/10.2109/jcersj2.119.319
  7. J. F. Shackelford and W. Alexander, Materials Science and Engineering Handbook, p. 790, 3rd Ed., CRC Press LLC, Boca Raton, FL, USA, 2001.
  8. J. H. Eom, Y.-W. Kim, D. H. Jeong, and S. S. Lee, "Effect of Additives on Compressive Strength and Thermal Conductivity of Vermiculite-Silica Composites with Layered Structure," J. Ceram. Soc. Jpn., 120 [4] 150-54 (2012). https://doi.org/10.2109/jcersj2.120.150
  9. S. H. Chae, Y.-W. Kim, I. H. Song, H. D. Kim, and M. Narisawa, "Porosity Control of Porous Silicon Carbide Ceramics," J. Eur. Ceram. Soc., 29 2867-72 (2009). https://doi.org/10.1016/j.jeurceramsoc.2009.03.027
  10. B. V. M. Kumar and Y.-W. Kim, "Processing of Polysiloxane-Derived Porous Ceramics: A Review," Sci. Technol. Adv. Mater., 11 044303 (2010). https://doi.org/10.1088/1468-6996/11/4/044303
  11. K. Y. Lim, Y.-W. Kim, I. H. Song, and J. S. Bae, "Flexural Strength of Macroporous Silicon Carbide Ceramics," J. Kor. Ceram. Soc., 48 [5] 360-67 (2011). https://doi.org/10.4191/kcers.2011.48.5.360

Cited by

  1. Effect of Additive Composition on Flexural Strength of Cullet-Loess Tile Bodies vol.50, pp.6, 2013, https://doi.org/10.4191/kcers.2013.50.6.416
  2. Processing of Kaolin-Based Microfiltration Membranes vol.50, pp.5, 2012, https://doi.org/10.4191/kcers.2013.50.5.341
  3. Porous Alumina Ceramics with Multimodal Pore Size Distributions vol.14, pp.12, 2012, https://doi.org/10.3390/ma14123294