• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.18 no.11
• /
• pp.2685-2690
• /
• 2014

WPS determines position via a two-step process. In the construction phase, a radio map is constituted by collecting radio information signals. Positioning procedure is a step of comparing the radio signal newly acquired with the radio map. If the signals collected and the radio map are different the accuracy decreases. Even though the rate of accuracy is different according to positioning algorithms, accuracy drop is an issue common to all WPS systems. Signal strength fluctuation is caused by the malfunction of the device that receives positioning signals, obstruction and channel interference, etc. In this paper, in order to solve the problem caused by signal strength change, we propose a new radio map construction technique. The proposed method is intended to constitute a strong radio map to changes in the signal strength and updated by collecting the signal strength changes to the radio map. The use of this method is expected to enhance the accuracy of WPS by actively counteracting signal fluctuation.

• Journal of the Korean GEO-environmental Society
• /
• v.23 no.10
• /
• pp.13-19
• /
• 2022

This paper is to provide the results of usability of the impact force response signal induced from initial and successive rebound impacting a rock specimen for assessing the compressive strength of rock non-destructively. For this study, a device was devised for impacting a rock specimen and a system for measuring the impact force was set up. The impact was carried out by an initial rotating free falling impact and following repetitive impacts from the rebound action which eventually disappears. Three different kinds of rock specimen were tested and an impact force response signal was measured for each test specimen. The total impact force signal energy which is assessed from integrating the impact force response signal induced from initial and rebound impacts was compared with the directly measured compressive strength for each rock specimen. The comparison showed that the total impact force signal energy has a direct relationship with the directly measured compressive strength and the results clearly indicated that the compressive strength of rock can be assessed non-destructively using total impact force signal energy.

• Journal of Navigation and Port Research
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2015

The number of mobile terminals equipped with a GPS module is steadily increasing today. However, because they using code pseudorange measurements in positioning, the positioning accuracy of mobile terminals is lower than that of those receivers using carrier phases. Especially, the multipath signal causes more significant errors in code pseudoranges. Therefore, the techniques of multipath detection and elimination is necessary. In this study, as an initial analysis of multipath detection and elimination technique development, we tested the feasibility of multipath signal detection using GPS signal strength information. We found that the GPS signal strength increases as the elevation angle gets higher in the open-sky environment. Also, we found that the signal strength decreases when there were some signal reflectors nearby. We checked the repeatability of the signal strength variation characteristics by reflecting repeat time of GPS satellites. As a result, this characteristics repeats almost perfectly when GPS satellites pass the same orbit. Therefore, we found that it is not a temporary phenomenon and the multipath signal detection should be possible by using GPS signal strength information.

• Journal of the Institute of Electronics Engineers of Korea SC
• /
• v.37 no.3
• /
• pp.1-8
• /
• 2000

In this paper, we formulate an optimal control problem to obtain the optimal signal strength and detection threshold for tracking with NN filter, First, we predict the tracking performance of NN filter by using the HYCA method. Based on this method, the predicted tracking performance is represented with respect to signal strength and detection threshold. Using this relation, we find the optimal parameters for following three examples： 1) the sequence of optimal detection threshold which minimizes sum of position estimation error； 2) the sequence of optimal detection threshold which minimizes sum of validation gate volume； and 3) the sequence of optimal signal strength and detection threshold which minimizes sum of signal strength.

• Journal of IKEEE
• /
• v.26 no.2
• /
• pp.186-195
• /
• 2022

In this paper, we propose a new algorithm to improve the accuracy of indoor positioning techniques using Wi-Fi access points as beacon nodes. The proposed algorithm is based on the Weighted Centroid algorithm, a popular method widely used for indoor positioning, however, it improves some disadvantages of the Weighted Centroid method and also for other kinds of indoor positioning methods, by using the received signal strength correction method and genetic algorithm to prevent the signal strength fluctuation phenomenon, which is caused by the complex propagation environment. To validate the performance of the proposed algorithm, we conducted experiments in a complex indoor environment, and collect a list of Wi-Fi signal strength data from several access points around the standing user location. By utilizing this kind of algorithm, we can obtain a high accuracy positioning system, which can be used in any building environment with an available Wi-Fi access point setup as a beacon node.

• 제어로봇시스템학회:학술대회논문집
• /
• 2005.06a
• /
• pp.1771-1774
• /
• 2005

Recently, RFID has become popular in the field of remote sensing applications. Location awareness is one of the most important keys to deploying RFID for advanced object tracking. Generally, multiple reference RF stations or additional sensors are used for the location sensing with RFID, but, particularly in indoor environments, spatial layout and cost problems limit the applicability of those approaches. In this paper, we propose a novel method for location sensing with active RFID systems not requiring the need for reference stations or additional sensors. The system triangulates the position of RF signal source using the signal pattern of the loop antenna connected to the power detector. The power detector consists of a signal strength detector and a signal analysis unit. The signal analysis unit indicates the signal strength and serial number using the signal from the strength detector, and provides the direction of the signal to the application target. We designed three different signal analysis units depending on the threshold type. The developed system can sense the direction to the transponder located over 10 m away within the maximum error of $5^{\circ}$. It falls within a reasonable range in our normal office environment.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.1
• /
• pp.124-131
• /
• 2015

In this paper, we proposed indoor positioning system using RSS(Received Signal Strength) positioning method and TSS(Transmission Signal Strength). The main point in the paper is to improve reliability of accuracy positioning with the area recognition algorithm and probabilistic algorithm, which can be effectively used indoor. In the test in 1-dimensional or 2-dimensional spaces, also we checked effective positioning system considered environment of propagation that is changed by reflection, refraction and multipath in according to space form. It is necessary to find place where urgent situation happen and quickly to respond the situation for patients or the weak. Therefore, we expect the positioning system proposed can apply to the field of traffic IT.

• Journal of Biomedical Engineering Research
• /
• v.28 no.4
• /
• pp.494-502
• /
• 2007

Ubiquitous location based services (u-LBS) will be interested to an important services. They can easily recognize object position at anytime, anywhere. At present, many researchers are making a study of the position recognition and tracking. This paper consists of postion recognition and user identification system. The position recognition is based on location under services (LBS) using a signal strength map, a database is previously made use of empirical measured received signal strength indicator (RSSI). The user identification system automatically controls instruments which is located in home. Moreover users are able to measures body signal freely. We implemented the multi-hop routing method using the Star-Mesh networks. Also, we use the sensor devices which are satisfied with the IEEE 802.15.4 specification. The used devices are the Nano-24 modules in Octacomm Co. Ltd. A RSSI is very important factor in position recognition analysis. It makes use of the way that decides position recognition and user identification in narrow indoor space. In experiments, we can analyze properties of the RSSI, draw the parameter about position recognition. The experimental result is that RSSI value is attenuated according to increasing distances. It also derives property of the radio frequency (RF) signal. Moreover, we express the monitoring program using the Microsoft C#. Finally, the proposed methods are expected to protect a sudden death and an accident in home.

• Journal of the Korean GEO-environmental Society
• /
• v.19 no.8
• /
• pp.5-10
• /
• 2018

This study provides a method to assess the compressive strength of granitic gneiss using total sound signal energy, which is calculated from the signal of sound pressure measured when an object impacts on rock surface, and its results. For this purpose, many test specimens of granitic gneiss were prepared. Each specimen was impacted using a devised device (impacting a specimen by an initial rotating free falling and following repetitive rebound actions) and all sound pressures were measured as a signal over time. The sound signal was accumulated over time (called total sound signal energy) for each specimen of granitic gneiss and it was compared with the directly measured compressive strength of the specimen. The comparison showed that the total sound signal energy was directly proportional to the measured compressive strength, and with this result the compressive strength of granitic gneiss can be reliably assessed by an estimation equation of total sound signal energy. Furthermore, from the study results it is clearly believed that the compressive strength of other rocks and concrete can be assessed nondestructively using the total sound signal energy.

• The Journal of the Acoustical Society of Korea
• /
• v.20 no.2
• /
• pp.44-51
• /
• 2001

This Paper the practical echo signal synthesis model to predict the target strength and signal shape of a submarine for a valuable tool to active sonar engineer. It is based on UTAHID (Underwater TArget by Highlight Distribution) model which is relocated highlight points along to external hull for aspect angle, and synthesized echo signal by modified grouping highlights to internal scatter cloud. Proposed model is analyzed target strength characteristics on various incident pulse length, and synthesis signal signature, target time spreading loss, echo elongation effect and so on. Thus it can be efficiently used in various real systems related to underwater target echo signal synthesis, that is, active sonar, acoustic countermeasure and surveillance system.