• 제목/요약/키워드: signal sequence

검색결과 1,264건 처리시간 0.026초

저소음 타이어 설계에 대한 시변주파수 분석 적용 (The Reduction of Tire Pattern Noise Using Time-Frequency Transform)

  • 황성욱;방명제;김선주;조춘택
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2005년도 추계 학술대회논문집(수송기계편)
    • /
    • pp.144-147
    • /
    • 2005
  • The tire is considered as one of the Important noise sources having an influence on vehicle's performance. The Pattern noise of a tire is the transmission sound of airborne noise. On smooth asphalt road, Pattern noise is amplified with the velocity. In recent, the study on the reduction of Pattern noise is energetically processed. Pattern noise is strongly related with pitch sequence. To reduce the pattern noise, tire's designer has to randomize the sequence of pitch. The FFT is a traditional method to evaluate the level of the randomization of the pitch sequence, but gives no information on time-varying, instantaneous frequency. In the study, we found that Time-Frequency transform is a useful method to non-stationary signal such as tire noise.

  • PDF

Comparative Evaluation between 1.5T vs 3.0T MRI in Brain Metastasis According to its Size

  • 정우석;정태섭;허진;이재훈
    • 대한자기공명의과학회:학술대회논문집
    • /
    • 대한자기공명의과학회 2003년도 제8차 학술대회 초록집
    • /
    • pp.22-22
    • /
    • 2003
  • The purpose of this study was to compare the detection rate of brain metastasis according to size of nodule between 1.5T and 3.0T MRI 대상 및 방법: We reviewed 44 patients with primary tumors and clinical symptoms suggesting brain metastasis. After administration of double dose gadolinium-DTPA, MR imaging was performed with 3D SPGR sequence by 3.0T MRI and then with T1 SE sequence by 1.5T MRI. Consequently, comparison was done in 1.5T T1 SE sequence and 3.0T 3D SPGR sequence. With use of the signal intensity (SI) measurements in the metastatic nodules and adjacent tissue, metastatic nodule-to-adjacent tissue SI ratio were calculated. In each patient, the number of metastatic lesions detected in 1.5T and 3.0T, and their size were assessed qualitatively by three blinded readers.

  • PDF

시변주파수 분석을 이용한 저소음 타이어 설계 (The Reduction of Tire Pattern Noise Using Time-frequency Transform)

  • 황성욱;방명제;노국희;김선주
    • 한국소음진동공학회논문집
    • /
    • 제16권6호
    • /
    • pp.627-633
    • /
    • 2006
  • The tire is considered as one of the important noise sources having an influence on vehicle's performance. The Pattern noise of a tire is the transmission sound of airborne noise. On smooth asphalt road, Pattern noise is amplified with the velocity. In recent, the study on the reduction of Pattern noise is energetically processed. Pattern noise is strongly related with pitch sequence. To reduce the pattern noise, tire's designer has to randomize the sequence of pitch. The FFT is a traditional method to evaluate the level of the randomization of the pitch sequence, but gives no information on time-varying, instantaneous frequency. In the study, we found that Time-Frequency transform is a useful method to non-stationary signal such as tire noise.

Evaluation of sequence tracking methods for Compton cameras based on CdZnTe arrays

  • Lee, Jun;Kim, Younghak;Bolotnikov, Aleksey;Lee, Wonho
    • Nuclear Engineering and Technology
    • /
    • 제53권12호
    • /
    • pp.4080-4092
    • /
    • 2021
  • In this study, the performance of sequence tracking methods for multiple interaction events in specific CdZnTe Compton imagers was evaluated using Monte Carlo simulations. The Compton imager consisted of a 6 × 6 array of virtual Frisch-grid CZT crystals, where the dimensions of each crystal were 5 × 5 × 12 mm3. The sequence tracking methods for another Compton imager that consists of two identical CZT crystals arrays were also evaluated. When 662 keV radiation was incident on the detectors, the percentages of the correct sequences determined by the simple comparison and deterministic methods for two sequential interactions were identical (~80%), while those evaluated using the minimum squared difference method (55-59%) and Three Compton method (45-55%) for three sequential interactions, differed from each other. The reconstructed images of a 662 keV point source detected using single and double arrays were evaluated based on their angular resolution and signal-to-noise ratio, and the results showed that the double arrays outperformed single arrays.

비동기 IR-UWB 레인징 시스템 (Asynchronous IR-UWB ranging system)

  • 최유신;양훈기
    • 한국정보통신학회논문지
    • /
    • 제14권3호
    • /
    • pp.587-594
    • /
    • 2010
  • 본 논문에서는 two-way ranging protocol 기반의 비동기 IR-UWB 거리 측정 시스템을 제안한다. 거리 측정을 위해서 주기 선호 특성을 지닌 펄스열을 송신하며 수신단에서는 수신 펄스열을 아날로그 코릴레이터 뱅크틀 이용해서 주파수 도메인으로 변환한 후 주파수 도메인에서 디지털 선호 처리를 하게 되어 펄스률 정도 속도의 ADC로 구현이 가능하다. 제시된 알고리즘은 주파수 도메인에서 다중경로 채널 보상 및 matched 필터링을 하여 피크를 검출한 후 검출된 피크에 동기를 이룬 펄스열을 재전송하는 과정을 거친다. CM1 채널을 가정한 두 디바이스 사이의 거리 측정 시뮬레이션을 통해서 제시한 알고리즘의 타당성을 검증한다.

Orthogonal Reception Characteristics for the DS/SS Signals with Time-shifted m-Sequences

  • Baek Kyung Hoon;Hyun Kwang Min;Yoon Dong Weon;Park Sang Kyu
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2004년도 학술대회지
    • /
    • pp.658-662
    • /
    • 2004
  • This paper proposes an orthogonal reception structure for OS/SS communication with time-shifted m-sequences, and compares the performances of the proposed and conventional receiver. This structure provides two important characteristics to reference user signal with not only increment of auto-correlation value but also cancel of the cross-correlation value out to zero between the reference user and other user signals. In addition, the structure can be easily implemented with the conventional receiver adding an additional integrator path in parallel and an adder that sums the conventional path output and the new path output signal. Hence, the proposed structure can be applied for channel impulse response measurement, and efficiently used for multi-user interference signal cancellation and channel capacity increment by flexible structural inter-working operation, connection or disconnection, of the new path to conventional receiver structure.

  • PDF

Chirped BPSK 시스템의 항재밍 성능 분석 (Anti-Jamming Performance Analysis of Chirped BPSK System)

  • 유형만;윤성렬;정병기;김용로;유흥균
    • 한국전자파학회논문지
    • /
    • 제12권6호
    • /
    • pp.906-911
    • /
    • 2001
  • 본 논문에서는 비화 통신을 위하여 chirp 방식을 이용한 BPSK 시스템의 LPI(low probability of intercept)와 AJ(anti jamming) 성능을 분석하였다. Chirp 방식은 주파수를 전체 확산대역 내에서 임의적으로 변화시켜 신호의 주기적인 특성을 제거하기 때문에, feature parameter인 chip rate를 검출하는데 용이한 DAM(delay and multiplier)과 반송파 주파수 검출에 용이한 SC(Squaring Circuit)에 대항하여 뛰어난 LPI 특성을 가진다. chirp parameter의 변화에 따른 LPI 특성으로 chirp duration(Tc)이 커질수록 좋은 LPI 성능을 보인다. PBNJ(partial band noise jammer)환경에서, chirp 방식이 이론적인 DSSS(Direct Sequence Spread Spectrum) 방식에 비하여 AJ 성능이 우수함을 시뮬레이션으로 확인하였다. PBNJ와 MTJ(multi-tone jammer)를 비교하였을 때, chirped BPSK 시스템이 동일 JSR(jammer to signal power ratio)에서 MTJ에 더 우수한 AJ 성능이 있다.

  • PDF

뇌기능 영상을 위한 TRFGE, CGE 기법에서 이미징 모드와 기울임 각의 변화에 따른 자화율 효과의 해석 (Analysis of Susceptibility Effects by Variation of Imaging Modes and Tilting Angles in TRFGE and CGE Sequences for fMRI)

  • 정순철;노용만;조장희
    • 대한의용생체공학회:학술대회논문집
    • /
    • 대한의용생체공학회 1997년도 추계학술대회
    • /
    • pp.571-574
    • /
    • 1997
  • fMRI, functional MRI introduced recently appears based on the gradient echo technique which is sensitive to the field inhomogeneity developed due to the local susceptibility changes of blood oxygenation and deoxygenation. Common to all the gradient echo techniques is that the signal due to the susceptibility effects is generally decreased with increasing inhomogeneity due to the $T2^*$ effect or conventionally known as blood oxygenation level dependent (BOLD) effect. It is, also found that the BOLD sensitivity is also dependent on the imaging modes, namely whether the imaging is in axial, or coronal or sagittal mode as well as the directions of the vessels against the main magnetic field. We have, therefore, launched a systematic study of imaging mode dependent signal change or BOLD sensitivity as well as the signal changes due to the tilting angle of the imaging planes. Study has been made or both TRFGE sequence and CGE sequence to compare the distinctions of the each mode since each technique has different sensitivity against susceptibility effect. Method of computation and both the computer simulations and their corresponding experimental results are presented.

  • PDF

머리전달함수 측정법의 실험적 비교 (Comparison of Measurement Methods for Head-related Transfer Function(HRTF))

  • 안태수;이두호
    • 한국소음진동공학회논문집
    • /
    • 제19권12호
    • /
    • pp.1260-1268
    • /
    • 2009
  • Three methods(the stepped sine method, the statistical method(random excitation method) and the maximum-length sequence(MLS) method) for head-related transfer functions(HRTFs) are experimentally compared in view point of accuracy and efficiency. First, the stepped sine method has high signal-to-noise ratio, but low efficiency. Second, the statistical method is fast measurement speed, but weak to noise than the other methods. Finally, the MLS method shows both good efficiency and high signal-to-noise ratio, but it needs additional software or equipment such as MLS signal generator. For comparison of measurement accuracy, HRTFs of KEMAR dummy are measured for various azimuths and elevations. Error norms for magnitude and phase of HRTFs are defined and calculated for the measured HRTFs. The calculated error norms show that the methods give similar results in magnitude and phase except a little phase difference in the MLS method.

Effects of NEX on SNR and Artifacts in Parallel MR Images Acquired using Reference Scan

  • Heo, Yeong-Cheol;Lee, Hae-Kag;Cho, Jae-Hwan
    • Journal of Magnetics
    • /
    • 제18권4호
    • /
    • pp.422-427
    • /
    • 2013
  • The aim of this study was to investigate effects of the number of acquisitions (NEX) on signal-to-noise (SNR) and artifacts in SENSE parallel imaging of magnetic resonance imaging (MRI). 3.0T MR System, 8 Channel sensitivity encoding (SENSE) head coils were used along with an in-vivo phantom. Reference sequence of 3D fast field echo (FFE) was consisted of NEX values of 2, 4, 6, 8, 10 and 12. The T2 turbo spin echo (TSE) sequence used for exams achieved SENSE factors of 1.2, 1.5, 1.8, 2.0, 2.2, 2.5, 2.8, 3.0, 3.2, 3.5, 3.8 and 4.0. Exams were conducted five times for each SENSE factor to measure signal intensity of the object, the posterior phase-encode direction and frequency direction. And SNR was calculated using mean values. SENSE artifacts were identified as background signal intensity in the phase-encoded direction using MRIcro. It was found that SNR increased but SENSE artifacts reduced with NEX of 4, 8 and 12 when the NEX increased in reference scan. It is therefore concluded that image quality can be improved with NEX of 4, 8 and 12 for reference scanning.