• 제목/요약/키워드: signal sequence

검색결과 1,253건 처리시간 0.031초

PelB Signal Sequence로 유도된 재조합 인간 상피세포 증식인자 분비 발현 벡터의 제조

  • 박세철;남정현;김정근;권태종;고인영;유광현
    • 한국미생물·생명공학회지
    • /
    • 제24권5호
    • /
    • pp.553-559
    • /
    • 1996
  • We have designed nucleotide sequences of hEGF structural gene to eliminate the N-terminal methionine residue incorporated during the translation initiation step, and constructed recombinant human epidermal growth factor (rhEGF) secretion plasmids pYHB101, and pYHB2 in which pelB signal sequence-hEGF gene was expressed under the control of the T7, and tac promoter, respectively. We also constructed pYHB1 vector which contains rhEGF gene controlled by T7 promoter. The transformant with pYHB101 showed relatively slow growth pattern compared to the transformant with pYHB1. However, we observed that the transformant with pYHB101 secreted rhEGF of 13 mg/l significantly after 5 hr induction with 1 mM IPTG and that the T7 promoter was more effective than tac promoter when connected to pelB signal sequence. The amount of rhEGF was 14 mg/l under the sub-optimized condition.

  • PDF

소수성과 치환행렬에 기반한 신호서열 예측 (Signal Sequence Prediction Based on Hydrophobicity and Substitution Matrix)

  • 지상문
    • 한국정보과학회논문지:소프트웨어및응용
    • /
    • 제34권7호
    • /
    • pp.595-602
    • /
    • 2007
  • 본 논문에서는 미지의 아미노산 서열이 신호 펩티다제 I에 의해 절단되는 분비성 단백질인지를 판별하고, 분비성 단백질일 경우에는 절단 위치를 예측하는 방법을 제안한다. 아미노산의 소수성을 이용한 전처리를 수행하여 분비성 단백질의 선도서열인 신호서열의 존재와 절단 위치를 추정한다. 전처리를 통해서 신호서열 아닌 서열을 초기에 제외함으로써 신호서열 예측의 정확도를 높인다. 지지벡터기계를 신호서열의 예측에 효과적으로 적용하기 위해서, 생물학적 정보와 관련된 아미노산 서열간의 거리를 제안한다. 아미노산의 세포내 위치를 예측할 수 있는 소수성 척도와 아미노산의 진화적인 관계를 나타낼 수 있는 치환행렬을 이용하여 아미노산 서열간의 거리를 정의한다. Swiss-Prot release 50 단백질 자료에 대하여 교차타당성 기법을 사용하여 실험한 결과 제안한 방법은 신호서열중에 98.9%를 신호서열로 판별하였고, 88%의 절단위치 예측정확도를 보였다. 기존의 방법과의 비교실험을 통해서 제안한 방법이 신호서열의 예측에 더욱 효과적임을 확인하였다.

5지 신호교차로에서의 안전을 고려한 신호현시 설계 (Safety Enhanced Signal Phase Sequence Design of a Rotary with Five Leg Intersection)

  • 박재완;김진태;장명순
    • 대한교통학회지
    • /
    • 제20권7호
    • /
    • pp.23-29
    • /
    • 2002
  • 일반적으로 4지 또는 3지의 교차로가 설계·운영되고 있으나 적지 않게 5지 또는 그 이상 의 원형 신호교차로가 실질적으로 이용되고 있다. 접근로 수에 따른 교차로 형태별 분류에 의하면 5지 이상의 교차로에서의 상충지 점의 수는 4지 교차로의 그것보다 월등히 높아 설계지침에서도 4지 이하의 교차로를 설계할 것을 권하고 있으며 마찬가지로 5지 원형 신호교차로에서도 그 상충지점 수가 많다. 이러한 이유로 5지 신호 교차로의 신호 설계는 교통소통이 아닌 교통안전측면에서 신호현시 순서 및 길이가 결정되어야 할 필요가 있으며 또 그러한 현시순서는 교차로 내 원활한 교통의 흐름을 심각한 수준으로 방해하지 않을 필요가 있다. 본 연구에서는 5지 신호교차로의 안전을 고려한 현시순서설계 방안을 제시한다. 울산광역시에서 운영중인 공업탑 5지 신호교차로를 대상으로 현장자료를 수집하였으며, 신호시간 설계모형은 TRANSYT-7F를 적용했다. TRANSYT-7F에서의 최적 신호현시의 길이를 토대로 기본적으로 "한 현시에 2개 교통류의 이동" 원칙에 따라 재배열하였다. 제안된 방법으로 보정된 신호현시 순서 및 길이를 사용하여 모의실험한 결과 TRANSYT-7F에서 제시한 최적 신호현시 순서 및 길이를 적용한 것에 비하여 평균 6.2%지체도 증가가 있었으나 교차로 내 상충수를 61.5% 줄이는 결과를 도출하였다.

상호상관법에 의한 건축음향측정에 관한 연구 (Study on the Measurements of Architectural Acoustie by Cross-Correlation Methods)

  • 박병전;신영무
    • 한국음향학회지
    • /
    • 제9권2호
    • /
    • pp.42-52
    • /
    • 1990
  • 음향전파 측정에 상호상관법(직접법과 M계열 변조상관법)을 이용하므로서 임펄스 입력에 의한 경우와 같은 결과를 얻을 수 있다는 것과, 또 상호상관법의 특징인 외란노이즈의 영향을 줄일 수 있었던 것 등을 건축음향분야에서 측정계를 대상으로 하여 이론적으로 정리하였다. 또 이들 계측법을 응용하여 흡음재료의 사입사 흡음특성의 측정, 실의 단독 단음응답 및 잔향감쇄 과정의 측정, 음압레벨 분포, 차음성능 등을 측정하고 여러 건축음향측정에서 이들 방법이 유효하다는 것을 실험적으로 확인하였다.

  • PDF

FPGA를 이용한 logic tester의 test sequence control chip 설계 및 검증 (Test sequence control chip design of logic test using FPGA)

  • 강창헌;최인규;최창;한혜진;박종식
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2001년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.376-379
    • /
    • 2001
  • In this paper, I design the control chip that controls inner test sequence of Logic Tester to test chip. Logic tester has the thirteen inner instructions to control test sequence in test. And these instructions are saved in memory with test pattern data. Control chip generates address and control signal such as read, write signal of memory. Before testing, necessary data such as start address, end address, etc. are written to inner register of control chip. When test started, control chip receives the instruction in start address and executes, and generates address and control signals to access tester' inner memory. So whole test sequence is controlled by making the address and control signal in tester's inner memory. Control chip designs instruction's execution blocks, respectively. So if inner instruction is added from now on, a revision is easy. The control chip will be made using FPGA of Xilinx Co. in future.

  • PDF

A Method for Fault detecting on Power Transmission Network by use of M-sequence Correlation

  • Nishiyama, Eiji;Kuwanami, Kenshi;Owaki, Kosuke
    • 제어로봇시스템학회:학술대회논문집
    • /
    • 제어로봇시스템학회 2003년도 ICCAS
    • /
    • pp.2570-2575
    • /
    • 2003
  • Monitoring a power transmission line is significant for power electric companies. In this paper, we propose a new method for detecting an fault point of power transmission line by use of M-sequence correlation technique. In this method, detecting signal is used as one or plural M-sequences ( same characteristic polynomial, including normal and reverse mark, synchronized ). In receiving point, we make same sequence with the input one and take crosscorrelation function between M-sequence and the received signal. We can see transfer fanctions of plural paths between inputs and a output taps separated from different of delay times on the crosscorrelation function, and from these transfer fanctions, so we compare them when fault occurred with in usual.

  • PDF

병렬 구조에 의한 가변 논리제어장치의 기능적 설계 (A Functional Design of Programmable Logic Controller Based on Parallel Architecture)

  • 이정훈;신현식
    • 대한전기학회논문지
    • /
    • 제40권8호
    • /
    • pp.836-844
    • /
    • 1991
  • PLC(programmable logic controller) system is widely used for the control of factory. PLC system receives ladder diagram which is drawn by the user to implement hardware logic, converts the ladder diagram into sequence program which is executable in the PLC system, and executes the sequence program indefinitely unless user breaks. The sequence program processes the data of on/off signal, and endures 1 scan delay and missing of pulse-type signal shorter than a scan time. So, data dependency doesn't exist. By applying theis characteristics to multiprocessor architecture, we design parellel PLC functionally and evaluate performance upgrade. Parallel PLC consists of central processing module, N general processing unit, and a shared memory by master-slave type. Each module executes allocated sequence program by the control of central processing module. We can expect performance upgrade by parallel processing, and reliability by relocation of sequence program when error occurs in processing module.

  • PDF

A Novel M-ary Code-Selected Direct Sequence BPAM UWB Communication System

  • Bai, Zhiquan;Kwak, Kyung-Sup
    • ETRI Journal
    • /
    • 제28권1호
    • /
    • pp.95-98
    • /
    • 2006
  • In this letter, a novel M-ary code-selected direct sequence (DS) ultra-wideband (UWB) communication system is presented. Our purpose is to achieve a high data rate by an M-ary code-selected direct sequence bipolar pulse amplitude modulation (MCSDS-BPAM) scheme. In this system, a particular DS code sequence is selected by the $log_2M$/2 bits from the DS gold code set. This scheme can accomplish both a high data rate without increasing the system bandwidth or changing the pulse shape and improve the BER with an increase of modulation level M even at a lower signal-to-noise ratio (SNR). The receiver signal processing algorithm is given for an MCSDS-BPAM UWB system over an ideal AWGN channel and correlation receivers.

  • PDF

OFDM PAPR 감소를 위한 피크 신호 관찰 기반의 적응적 SLM 기법 (Adaptive SLM Scheme Based on Peak Observation for PAPR Reduction of OFDM Signals)

  • 양석철;신요안
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2006년도 하계종합학술대회
    • /
    • pp.15-16
    • /
    • 2006
  • In this paper, we propose an adaptive SLM scheme based on peak observation for PAPR reduction of OFDM signals. The proposed scheme is composed of three steps: peak scaling, sequence selection, and SLM procedures. In the first step, the peak signal samples in the IFFT outputs of the original input sequence are scaled down. In the second step, the sub-carrier positions where power difference between the original input sequence and the FFT outputs of the scaled signal is large, are identified. Then, the phase sequences which have the maximum number of phase-reversed sequence words only for these positions, are selected. Finally, only using the selected phase sequences, the generic SLM procedure is performed for the original input sequence. Simulation results reveal that the proposed adaptive SLM remarkably reduces the complexity in terms of IFFT and PAPR calculations than the conventional SLM, while maintaining the PAPR reduction performance.

  • PDF

효모에서 Glucoamylase 신호서열에 의한 인체 $\alpha$1-Antitrypsin의 분비 효율 향상 (The Glucoamylase Signal Sequence Directs the Efficient Secretion of Human $\alpha$1-Antitrypsin in Yeast Cells)

  • Song, Moo-Young;Kwon, Ki-Sun;Kang, Dae-Ook;Yu, Myeong-Hee;Park, Hee-Moon;Kim, Jinmi
    • 미생물학회지
    • /
    • 제31권3호
    • /
    • pp.203-207
    • /
    • 1993
  • Five different secretion vectors were constructed by varying the signal sequences and .alpha.-antitrypsin (.alpha.1-AT) a numan secretory protein, was produced from yeast cells. The signal sequences used are those of acid phosphatase (PH05) and .alpha.-factor (M f.alphal1) of Saccharomyces cerevisiae, glucoamylase (STA1) of Saccharomyces diastaticus, and human .alpha.1-AT. Four vectors directed the efficient secretion of .alpha.1-AT ito the culture media. The secretion vector carrying the glucoamylase signal sequence (pGAT11) showed the highest efficiency of secretion. About 70% of .alpha.1-AT produce dwere secreted into the media. The endo H treatment of partially purified .alpha.1-AT indicates that the secreted .alpha.1-AT appeared to be glycosylated. This glycosylation pattern was altered when amino acid substitution mutations were introduced at the three glycosylation sites of .alpha.-AT.

  • PDF