• 제목/요약/키워드: signal processor circuit

검색결과 108건 처리시간 0.025초

PAM방식을 적용한 단상 승강압형 정류기의 디지탈제어 (Digital Control of Single Phase Buck-Boost Converter by Pulse Amplitude Modulation Mehtod)

  • 김태진;변영복;조기연;김철우
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 1998년도 전력전자학술대회 논문집
    • /
    • pp.54-57
    • /
    • 1998
  • This paper describes a digital implementation of a pulse amplitude modulation(PAM) method for a unity-power-factor buck-booster converter. A digital controller is designed and implemented by a Digital Signal Processor(DSP) to replace the analog control circuit for PAM. Experimental results are presented and compared with simulations.

  • PDF

DSP를 이용한 위상제어기 (Phase Controller Using Digital Signal Processor)

  • 오봉환;이사영;홍일선;김홍철;김원철;전지용
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 하계학술대회 논문집 A
    • /
    • pp.119-121
    • /
    • 1998
  • Phase controller is made and tested to estimate the characterics of superconductor. Phase controller using the DSP2104 can determine the closing phase angle and period of transport current increased by shorting bypassed circuit. In this paper, the experimental results are described.

  • PDF

벅 차동전력조절 회로가 적용 된 다출력 스위치드-커패시터 부스트 컨버터의 소신호 모델 분석 (Small signal Model Analysis of multi-output switched-capacitor boost converter with buck differential power processor circuit)

  • 이춘구;박정현;박종후
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2017년도 전력전자학술대회
    • /
    • pp.172-173
    • /
    • 2017
  • 본 논문은 벅 차동전력조절 회로가 적용 된 다출력 스위치드-커패시터 부스트 컨버터의 소신호 모델 분석에 대한 논문이다. 제안하는 회로는 각 태양광 모듈의 최대전력점을 추정하기 위해서 제어된다. 제안하는 회로는 상태 공간 평균화 기법과 시그널 플로우 그래프를 통해서 해석하였으며 PSIM과 MATLAB을 통해서 증명하였다.

  • PDF

16비트 신호처리 프로세서 기반 유효성분 누설전류 감지 알고리즘 구현 (The Implementation of Active Leakage Current Detecting Algorithm based on 16 bit Signal Processor)

  • 한영오
    • 한국전자통신학회논문지
    • /
    • 제11권6호
    • /
    • pp.605-610
    • /
    • 2016
  • 누전차단기는 전기재해로 인한 사고를 미연에 방지하기 위해 사용되는 유일한 방법이다. 그러나 기존의 누전차단기는 15mA~30mA의 차단범위에서 합성 누설전류를 검출하여 동작하기 때문에 저항성 누설전류에 의해 발생하는 화재 및 인체감전으로 인한 인명 및 재산피해를 미연에 방지하는데 한계가 있다. 또한 용량성 누설전류에 의한 오동작으로 인한 생산성 감소 및 신뢰성 등의 문제를 가지고 있다. 본 연구에서는 기존 누전차단기의 문제를 해결하기 위해 위상차를 측정을 통하여 유효성분(저항성) 누설전류를 감지할 수 있는 알고리즘을 개발하였고, 감지된 누설전류를 기술표준규격에서 규정하는 0.03초 이내에 차단을 할 수 있도록 16 bit 신호처리 프로세서인 MSP430 프로세서를 사용하여 유효성분 누설전류 감지 알고리즘을 구현하였다.

AMDF를 이용한 Digital Sonar 의 반사신호처리에 관한 연구 (On the reflected signal processing of Digital Sonar using the AMDF)

  • 홍우영
    • 한국음향학회:학술대회논문집
    • /
    • 한국음향학회 1984년도 추계학술발표회 논문집
    • /
    • pp.91-95
    • /
    • 1984
  • Because of layer and scattering in the ocean, there are some problem in algorithm currently used for the recognition of targets. Those are time delay of processing and circuit design. The simple method of detecting direct sound wave in noise caused by time delay is proposed-recognized, estimated, and then direcxt sound wave is reconstructed by the AMDF and $\mu$-processor. 2KHz, 4KHz, 8KHz, 12KHz, 16KHz sound waves are used in experiment. To obtain a reference signal, anechoic water tank is used is processing and aluminium water tank used instead of real ocean. As a result, there are a few errors which caused by anechoic water tank error, decreasing of frequency make errors. Possibility of application to Sonar Signal Processing is proved.

  • PDF

바-코드 신호처리 시스템에 관한 연구 (A Study On Bar-Code Signal Processing System)

  • 임종태;은재정;박한규
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(I)
    • /
    • pp.61-63
    • /
    • 1987
  • In this paper, we develope a system which can perform signal processing for bar-code laser scanner. This system is composed of optical detector and preprocessor. The former detects the diffused light and converts it into TTL lebel output. The latter discriminator valid data from various raw data and transmits data to micro-processor. The preprocessor consists of edge transition detector, latch signal generator, module counter, register array, adder array, and buffer memory control circuit etc..

  • PDF

위성 탑재용 래칭 전류 리미터 (Latching Current Limiter for Satellite)

  • 김두일;김희준;한상철
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2005년도 제36회 하계학술대회 논문집 B
    • /
    • pp.1368-1370
    • /
    • 2005
  • Satellite is operated only with internal battery when separated from rocket. Internal battery is charged only from SAR(solar Array Regulator), solar cell. So battery will be exhausted and purpose of satellite will be failed if load module is out of order or short. This paper proposed real time current limiter which operated by telemetry of outer processor. This current limiter operates by control signal simultaneously cuts off over current by self over current sensing circuit. So it can reduce waste of battery energy and over load of outer processor.

  • PDF

동기신호 최적화 기법을 통한 고품위급 모니터의 디지털 신호처리회로 구현 (English Digital Signal Processing Circuit in HD Monitor using Synchronization Signal Optimization)

  • 천성렬;김익환;이호근;하영호
    • 한국통신학회논문지
    • /
    • 제28권11C호
    • /
    • pp.1152-1160
    • /
    • 2003
  • 본 논문에서는 다양한 해상도의 신호 입력을 지원하는 고품위급 모니터의 디지털 신호처리 회로를 제안한다. 기존의 디지털 회로에서 ADC(Analog to Digital Convertor)와 VDP(Video Display Processor)로부터 발생하는 내부 디지털 PLL(Phase-locked Loop)의 낮은 성능과 IC의 내부 편차문제, 모듈간의 상이한 전압 차이 때문에, 다양한 입력 신호에서 안정된 동기신호 처리를 할 수 없는 문제가 있었다. 이를 해결하기 위해서 다양한 해상도의 신호 입력으로부터 동기 신호들의 규칙성을 이용하여 동기 신호를 관리하면서 시스템의 간섭을 최소화하는 동기신호 최적화 기법을 제안하였다. 제안한 방법을 적용한 결과 다양한 해상도에서 안정적으로 동기신호를 처리함으로써 여러 모드의 입력신호에 대응할 수 있었다.

DSP를 이용한 태양광 발전 시스템용 전류형 PWM 인버터 (Current-Source PWM Inverter Equipped with DSP for Photovoltaic System)

  • 박성준;허권행;강필순;김철우
    • 전력전자학회논문지
    • /
    • 제7권5호
    • /
    • pp.437-442
    • /
    • 2002
  • 본 논문에서는 벅-부스트 형태에 기초한 전류형 PWM 인버터를 제안하고, 이를 태양광과 계통 연계를 위한 인터페이스 회로로서의 타당성을 검증하였다. 제안하는 회로는 다섯 개의 스위칭 소자를 가지게 되는데, 이 중 단 하나의 스위치만이 쵸핑 동작을 수행하게 되고, 나머지 스위치들은 출력단의 정·부 방향을 결정짓는데 이용된다. 따라서, 스위칭에 의한 손실을 상당히 저감시킬 수 있고, 입력단의 인덕터 전류를 전류 불연속 모드로 동작시켜 별도의 입력 전류의 검출이 없이도 출력단을 단위 역률화 할 수 있는 장점을 가진다. 제안하는 계통 연계형 인버터에 대한 동작을 이론적으로 분석하고 DSP TMS320F241을 이용한 150[W]급 시작품의 실험 결과로부터 제안하는 인버터의 타당성을 검증하였다.

TMS320F2812 DSP를 이용한 산업용 SPMSM 정밀 제어시스템 개발 (A Development of an Industrial SPMSM Servo Drive System using TMS320F2812 DSP)

  • 김민희;임태훈;정장식;김성호
    • 전력전자학회논문지
    • /
    • 제10권2호
    • /
    • pp.138-147
    • /
    • 2005
  • 최근 급속도로 발전된 산업분야에서 요구되는 서보 시스템에서의 빠른 응답특성과 고도의 정밀성을 구현하기 위하여 고속의 연산을 수행할 수 있는 DSP(Digital Signal Processor)의 사용이 필수적이다. 그러나 기존의 DSP는 고속의 연산을 주력으로 전동기 제어에 필요한 PWM 게이팅 발생 장치와 엔코더 입력 장치, ADC(Analog to Digital Converter)등의 주변 장치를 포함하지 않았다. 이러한 추가적인 주변회로로 인한 제어 회로의 복잡성과 보드의 대형화 및 생산단가 상승의 요인으로 작용하였다. 따라서 본 논문에서는 연산 능력이 기존의 DSP에 뒤지지 않으며 전동기 제어 주변회로를 포함하고 있는 TMS320F2812 DSP를 사용하여 현재 산업 현장에서 사용되고 있는 SPMSM 서보 시스템을 제어하여 기존 제어기의 주변회로로 인한 문제점을 해결하고자 한다.