• IE interfaces
• /
• v.12 no.2
• /
• pp.305-311
• /
• 1999

Robot task program is needed to control and manage a Robot without explicitly describing the robot program by user which includes commands, procedures, geometric and signal data in the detail level. To use the Robot task program, a computer system is required to convert the Robot task into the Robot program, which can be understood by the Robot. In this paper, the systemic method for automatic generation of explicit Robot programs (ERP) from task-level commands is described. Specifically, a 3-step procedure including Robot task decomposition, task synchronization and ERP generation is presented.

• International Journal of Control, Automation, and Systems
• /
• v.3 no.2
• /
• pp.217-224
• /
• 2005

Generally, the underwater flight vehicle (UFV) depth control system operates with the following problems: it is a multi-input multi-output (MIMO) system because the UFV contains both pitch and depth angle variables as well as multiple control planes, it requires robustness because of the possibility that it may encounter uncertainties such as parameter variations and disturbances, it requires a continuous control input because the system that has reduced power consumption and acoustic noise is more practical, and further, it has the speed dependency of controller parameters because the control forces of control planes depend on the operating speed. To solve these problems, an adaptive fuzzy sliding mode controller (AFSMC), which is based on the decomposition method using expert knowledge in the UFV depth control and utilizes a fuzzy basis function expansion (FBFE) and a proportional integral augmented sliding signal, is proposed. To verify the performance of the AFSMC, UFV depth control is performed. Simulation results show that the AFSMC solves all problems experienced in the UFV depth control system online.

• Journal of Positioning, Navigation, and Timing
• /
• v.2 no.1
• /
• pp.67-74
• /
• 2013

In this study, a remote controller was designed using localization technique. The designed remote controller system consists of infrared transmit/receive module for time synchronization, ultrasonic transmit/receive module for measuring the TOA value, and micro-controller for processing the measured data value. For the position estimation method of remote controller, the Savarese method was used which does not have a problem of diverging solution depending on initial value. The noise included in the measured value was removed by separating the signal and noise with the use of EMD method which is the non-stationary signal analysis technique. The designed system was tested by constructing a simulation environment, and the improvement of accuracy and precision for the application of EMD method was examined.

• ETRI Journal
• /
• v.35 no.3
• /
• pp.371-377
• /
• 2013

An effective signal detection algorithm with low complexity is presented for multiple-input multiple-output orthogonal frequency division multiplexing systems. The proposed technique, QR-MLD, combines the conventional maximum likelihood detection (MLD) algorithm and the QR algorithm, resulting in much lower complexity compared to MLD. The proposed technique is compared with a similar algorithm, showing that the complexity of the proposed technique with T=1 is a 95% improvement over that of MLD, at the expense of about a 2-dB signal-to-noise-ratio (SNR) degradation for a bit error rate (BER) of $10^{-3}$. Additionally, with T=2, the proposed technique reduces the complexity by 73% for multiplications and 80% for additions and enhances the SNR performance about 1 dB for a BER of $10^{-3}$.

• Journal of Information Processing Systems
• /
• v.13 no.2
• /
• pp.340-347
• /
• 2017

A watermark is a signal added to the original signal in order to preserve the copyright of the owner of the digital content. The basic challenge for designing a watermarking system is a dilemma between transparency and robustness. If we want a higher rate of transparency, there has to be a compromise in terms of its robustness and vice versa. Also, until now, watermarking is generalized, resulting in the need for a specialized algorithm to work for a specialized image processing application domain. Our proposed technique takes into consideration the image characteristics for watermark insertion and it optimizes transparency and robustness. It achieved a 99.98% retrieval efficiency for an image blurring attack and counterfeits other attacks. Our proposed technique counterfeits almost all of the image processing attacks.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.10
• /
• pp.99-111
• /
• 1994

A motion picture compression scheme using subband coding with motion compensation is presneted in this paper. A hierarchical subband decomposition is used to split the image signal into 10 subbands with a 3-layer pyramid structure and motion compensation is used in each band. However, in this case, motion vector information is drastically increased; therefore, initial motion vectors are estimated in the highest pyramid and motion vectors are refined using the reconsructed subband signal in each layer. Simulation results show that the proposed method compares favorably in terms of prediction error energy and side informatio with methods requiring additional information. Images recostructed from the proposed method show good quality compared to those reconstructed using blockwise DCT.

• Journal of the Institute of Convergence Signal Processing
• /
• v.7 no.1
• /
• pp.38-44
• /
• 2006

The omnidirectional mobility of a mobile robot may lose significance in motion control, unless the isotropy characteristics of the mechanism is maintained well. This paper investigates the local and global isotropy of an omnidirectional mobile robot with three caster wheels. All possible actuations with different number and combination of rotating and steering joints are considered. First, the kinematic model based on velocity decomposition and the algebraic conditions for the local isotropy are obtained. Second, the geometric conditions for the local isotropy are derived and all isotropic configurations are fully identified. Third, the global isotropy index is examined to determine the optimal parameters in terms of actuation set, characteristic length, and steering link length.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1999.05a
• /
• pp.235-239
• /
• 1999

This thesis is concerned with the development of useful engineering techniques to detect and analyze nonlinearities in mechanical systems. The methods developed are based on the concepts of higher order spectra, in particular the bispectrum. The study of higher order statistics has been dominated by work on the bispectrum. The bispectrum can be viewed as a decomposition of the third moment(skewness) of a signal over frequency and as such is blind to symmetric nonlinearities. Initially auto higher order spectra are studied in detail with particular attention being paid to normalization method. Traditional method based on the bicoherence are studied. Under certain conditions, notably narrow band signals, the above normalization method is shown to fail and so a new technique based on prewhitening the signal in the time domain is developed.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.45 no.2
• /
• pp.167-174
• /
• 1996

In this paper, a fault location algorithm is presented, which uses novel signal processing techniques and takes a new paradigm to overcome some drawbacks of the conventional methods. This new method for fault location on electric power transmission lines uses only one-terminal fault signals. The main feature of the method is hat it uses the high frequency components in fault signal and considers the influence of the source network by using a traveling wave propagation characteristics. As a result, we can develop a high speed, good accuracy fault locator.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.58 no.5
• /
• pp.1041-1046
• /
• 2009

In this paper, we proposed a robust watermark scheme for image based on SVD(Singular Value Transform) and Triplet. First, the original image is decomposed by using 3-level DWT, and then used the singular values changed for embedding and extracting of the watermark sequence in LL3 band. Since the matrix of singular values is not easily altered with various signal processing noises, the embedded watermark sequence has the ability to withstand various signal processing noise attacks. Nevertheless, this method does not guarantee geometric transformation(such as rotation, cropping, etc.) because the geometric transformation changes the matrix size. In this case, the watermark sequence cannot be extracted. To compensate for the above weaknesses, a method which uses the triplet for embedding a barcode image watermark in the middle of frequency band is proposed. In order to generate the barcode image watermark, the pattern of the watermark sequence embedded in a LL3 band is used. According to this method, the watermark information can be extracted from attacked images.