• 대한안전경영과학회:학술대회논문집
• /
• 대한안전경영과학회 2002년도 춘계학술대회
• /
• pp.31-36
• /
• 2002

In this paper, we developed a working adaptation evaluation system using finger force measurement which interact between material and biological system. The system consists of a finger force transducer, a signal conditioner, an A/D converter, a computer, and a software system for data processing. The finger force transducer is made by a load cell and a special mechanism. The data processing software controls the A/D converter, data monitoring, and data analysis for group classification. The developed system were tested by 4 different materials in left hand and the finger forte transducer in the other hand's thumb and index finger with 16 persons. As the results of experiments, the developed system could measure the finger force quantitatively and classify the measured values into four groups.

• 한국전자파학회논문지
• /
• 제12권4호
• /
• pp.503-512
• /
• 2001

본 논문에서는 실시간 입출력 신호를 이용한 전력증폭기의 복소 전달특성 추정법을 제안하였고, 이를 이용한 디지털 사전왜곡기를 설계 제작하였다. 제안된 방법은 입력 신호의 제한이 없어 변조 방식에 무관하게 적용이 가능하며, 임의의 실시간 입력 신호를 이용하므로 전력증폭기를 전달함수를 추정하기 위한 특정 신호(예를 들어, 이중톤 신호 등)의 입력이 불필요하다. 실험결과로 실시간 입출력을 이용한 전달함수와 측정 결과를 비교 제시하였고, 이를 적응 사전왜곡기에 적용한 경우 약 8.4 dB의 인접채널전력비 개선효과를 얻을 수 있었다.

• 대한전기학회논문지
• /
• 제41권8호
• /
• pp.914-921
• /
• 1992

In this paper, we introduce a Walsh network and an LMS algorithm, and show how these can be realized as an adaptive equalizer. The Walsh network is built from a set of Walsh and Block pulse functions. In the LMS algorithm, the convergence factor is an important design parameter because it governs stability and convergence speed, which depend on the proper choice of the convergence facotr. The conventional adaptation techniques use a fixed time constant convergence factor by the method of trial and error. In this paper, we propose an optimal method in the choice of the convergence factor. The proposed algorithm depends on the received signal and the output of the Walsh network in real time.

• 한국지능시스템학회논문지
• /
• 제10권5호
• /
• pp.395-400
• /
• 2000

본 논문에서는 강화학습에 기반한 새로운 뉴로-퍼지 제어기를 제안한다. 시스템은 개체의 행동을 결정하는 뉴로-퍼지 제어기와 그 행동을 평가하는 동적 귀환 신경회로망으로 구성된다. 뉴로-퍼지 제어기의 후건부 소속함수는 강화학습을 한다. 한편, 유전자 알고리즘을 통하여 진화하는 동적 귀환 신경회로망은 환경으로부터 받는 외부 강화신호와 로봇의 상태로부터 내부강화 신호를 만들어낸다. 이 출력(내부강화신호)은 뉴로-퍼지 제어기의 교사신호로 사용되어 제어기가 학습을 지속하도록 만든다. 제안한 시스템은 미지의 환경에서 제어기의 최적화 및 적응에 사용할 수 있다. 제안한 알고리즘은 컴퓨터 시뮬레이션 상에서 자율 이동로봇의 장애물 회피에 적용하여 그 유효성을 확인한다.

• ETRI Journal
• /
• 제25권6호
• /
• pp.437-444
• /
• 2003

We derive a new joint power and rate control rule with which we can minimize the mean transmission delay in CDMA networks for a given mean transmission power. We show that it is optimal to respectively control the power inverse-linearly and the rate linearly to the square root of channel gain while maintaining the signal-to-interference ratio at a constant. We also show that the proposed joint power/rate control rule achieves excellent performance results in terms of the probability of the instantaneous delay being within a target delay against one-dimensional control schemes.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.182-185
• /
• 2000

In this paper, we present a new adaptive filter structure which is based on polyphase decomposition of the filter to be adapted. This structure uses wavelet transform to acquire transform-domain coefficients of the input signal. With this coefficients RLS algorithm is used for adaptation. Particularly, using the polyphase parallel structure, we can trace the system which has very long impulse response with only increasing the subband, and show that computational savings can be achieved. The proposed structure was applied to system identification for performance estimation and compared with fullband adaptive filter.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1991년도 한국자동제어학술회의논문집(국제학술편); KOEX, Seoul; 22-24 Oct. 1991
• /
• pp.1934-1938
• /
• 1991

This paper proposes a robust model following control systems with nonlinear time varying plant. which realies good properties such as asymptotic stability, disturbance rejection and model-following with reduced sensitivity for plant parameter variation. The schemes do not incorporate any parameter identification algorithms, but the adaptation is realized through signal synthesis in a fixed parameter structure.

• ETRI Journal
• /
• 제28권2호
• /
• pp.155-161
• /
• 2006

In this paper, we introduce an escalator (ESC) algorithm based on the least squares (LS) criterion. The proposed algorithm is relatively insensitive to the eigenvalue spread ratio (ESR) of an input signal and has a faster convergence speed than the conventional ESC algorithms. This algorithm exploits the fast adaptation ability of least squares methods and the orthogonalization property of the ESC structure. From the simulation results, the proposed algorithm shows superior convergence performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2004년도 ICCAS
• /
• pp.741-746
• /
• 2004

We propose a new technique to the design and real-time implementation of an adaptive controller for robotic manipulator based on digital signal processors in this paper. The Texas Instruments DSPs(TMS320C80) chips are used in implementing real-time adaptive control algorithms to provide enhanced motion control performance for dual-arm robotic manipulators. In the proposed scheme, adaptation laws are derived from model reference adaptive control principle based on the improved direct Lyapunov method. The proposed adaptive controller consists of an adaptive feed-forward and feedback controller and time-varying auxiliary controller elements. The proposed control scheme is simple in structure, fast in computation, and suitable for real-time control. Moreover, this scheme does not require any accurate dynamic modeling, nor values of manipulator parameters and payload. Performance of the proposed adaptive controller is illustrated by simulation and experimental results for a dual arm robot consisting of two 4-d.o.f. robots at the joint space and cartesian space.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.2090-2092
• /
• 2003

Adaptive algorithms are widely used for various applications. One challenging application is an echo canceller in the long distance telephony network. This paper proposes the new variable step-size algorithm for adaptive lattice structure for echo cancellation. The new algorithm is using power of the output signal and the error signal to controlled the step of adaptation process. By this technique, the proposed algorithm is an excellent and effective in good stability. Performance comparison of the proposed algorithm and the other algorithm is made through simulation results.