• Journal of Electrical Engineering and Technology
• /
• 제9권2호
• /
• pp.532-540
• /
• 2014

It is necessary to measure the current of rotor for controlling the active and reactive power generated by the stator side of the doubly fed induction generator (DFIG) system. There are offset and scaling errors in the current measurement. The offset and scaling errors cause one and two times current ripples of slip frequency in the synchronous reference frame of vector control, respectively. This paper proposes a compensation method to reduce their ripples. The stator current is variable according to the wind force but the rotor current is almost constant. Therefore input of the rotor current is more useful for a compensation method. The proposed method adopts the synchronous d-axis current of the rotor as the input signal for compensation. The ripples of the measurement errors can be calculated by integrating the synchronous d-axis stator current. The calculated errors are added to the reference current of rotor as input of the current regulator, then the ripples are reduced. Experimental results show the effectiveness of the proposed method.

• 대한기계학회논문집B
• /
• 제28권7호
• /
• pp.834-841
• /
• 2004

Experimental study on the three-dimensional topology of hairpin packet structures in turbulent boundary layers were carried out. Two different Reynolds number based on momentum thickness, Re$\sub$$\theta$/=514 and 934 were generated in a blowing type wind tunnel under the condition of zero pressure gradient. Simultaneous measurements of velocity fields at a wall-normal plane and wall-parallel plane by a plane PIV and a Stereo-PIV systems. The two Nd:Yag laser systems and three CCD cameras were synchronized to obtain instantaneous velocity fields at the same time. To avoid optical noise at the crossing line by the two laser light sheets, a new optical arrangement using polarization was applied. The obtained velocity fields show the existence of hairpin packet structure vividly and the idealized hairpin vortex signature is confirmed by experiment. Two counter-rotating vortex pair which reflects the cutting plane of hairpin legs are found both side of a strong streaky structure when the wall-normal plane cuts the hairpin head.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2008년 영문 학술대회
• /
• pp.358-363
• /
• 2008

The spray cross-section characteristics of two-phase spray that using external-mixing nozzle injected into a subsonic cross flow were experimentally studied with various ALR ratio that is $0{\sim}59.4%$. Suction type wind tunnel was used and experiments were conducted to ambient environment. Several plain orifice nozzles with L/d of 30 and orifice diameter of 0.5 mm and orifice length 1.5 mm were tested. Free stream velocity profiles at the injection location were measured using hot wire. Spray images were captured to study collision point and column trajectory. Phase Doppler particle analyzer(PDPA) was utilized to quantitatively measuring droplet SMD, volume flux. Measuring probe of PDPA positions was moved 3-way transverse machine. SMD distributions were layered structure and peaked at the top of the spray plume and low value at bottom of the spray. Volume flux of spray was distributed to the two side region and volume flux quantity decreased when ALR ratio increased. It was found that the perpendicularly injected two-phase spray jet of external mixing into a cross flow showing that mistlike spray moved away from the test section bottom region.

• 대한조선학회논문집
• /
• 제43권1호
• /
• pp.1-14
• /
• 2006

To improve maritime safety, it is very important not only to make safer design and operation but also to do proper response in case of maritime casualty. The large-scaled casualties will be caused by loss of structural strength and stability due to the progressive flooding and enlargement of damage by the effect of waves and wind. To prevent foundering and structural failure, the prediction of ship motion behavior of damaged ship in wave is necessary. This paper describes the motion behavior of damaged ship in waves through theoretical and experimental studies. A time domain theoretical model of damaged ship motions and accidental flooding, which can be applied to any type of ship or arrangement and considers the effects of flooding of compartments, has been developed. The model tests have been carried out in regular and irregular waves with different wave heights and directions in ship motion basin. Those were performed for three different damaged conditions such as engine room bottom damage, side shell damage and bow visor damage of a Ro-Ro ship. Comparison of theoretical and experimental results was performed.

• PNF and Movement
• /
• 제3권1호
• /
• pp.35-45
• /
• 2005

Objectives : The purpose of this study was to understanding the constraint induced movement and Self-efficacy with arm training on upper motor function in Stroke Patients. Methods : Stroke, the leading cause of functional disability, causes a variety of impairments that compromise quality of life. Upper limb hemiparesis, a commonly seen impairment, is particularly problematic given its impact on activities of daily living. Because stroke was a disease to correspond to the first during domestic cause of death, and was accompanied by a lot of side aftereffects after a survival, stroke rehabilitation bought a patient and a family and a physical therapist, and it was main concern of. Results : Looks into upper extremity excrise of a subacute stroke patient estranged a acute convalescence later by a rehabilitation treatment in this consideration, and evaluates an effect to wind up constraint induced movement for an early treatment of stroke and Self efficacy, and help is one to an early rehabilitation of an stroke patient. Conclusions : Overuse sound tends after the stroke occurrence in the early stage in order to recompense for stroke, and at the time of a new aspect called learned nonuse syndrome by a movement of a paralysis part dusting off wealth with this step thing later. Constraint induced movement using self efficacy could be an effective for improving function of stroke.

• 한국환경과학회지
• /
• 제30권3호
• /
• pp.257-266
• /
• 2021

This study explored measures to reduce noise applicable to Gimhae international airport centering on densely packed housing areas. Especially, as for measures to relieve noise damage on the densely packed housing areas in Gimhae-si, the noise reduction effect is expected to be doubled if the west runway (36L/18R) is used as the preferred runway for the 36 direction takeoff, as well as if the flight bypasses the densely packed housing areas by means of sophisticated navigation using the area navigation (RNAV) procedure based on performance-based navigation (PBN). Takeoff toward the south connects the flight path to the South Sea which has comparatively low noise impact, relieving noise damage on the densely packed housing areas (apartment complexes in Naeoe-dong of Gimhae-si, etc.) near the northern end of the runway. The operation of the runway displaced threshold is currently being implemented on the west runway (36L/18R) of Gimhae international airport. It has been found that swing landing in spring and summer when the wind blows from the south has a noise reduction effect on the noise sensitive areas at the side and end of the west runway (Gangdong-dong and Jukdong-dong of Gangseo-gu and Buram-dong of Gimhae-si, etc.).

• Wind and Structures
• /
• 제34권1호
• /
• pp.151-159
• /
• 2022

The aerodynamics of blunt bodies with separation at the sharp corner of the leading edge and reattachment on the body side are particularly important in civil engineering applications. In recent years, a number of experimental and numerical studies have become available on the aerodynamics of a rectangular cylinder with chord-to-thickness ratio equal to 5 (BARC). Despite the interest in the topic, a widely accepted set of guidelines for grid generation about these blunt bodies is still missing. In this work a new, well resolved Direct Numerical Simulation (DNS) around the BARC body at Re=3000 is presented and its results compared to previous DNSs of the same case but with different numerical approaches and mesh. Despite the simulations use different numerical approaches, mesh and domain dimensions, the main discrepancies are ascribed to the different grid spacings employed. While a more rigorous analysis is envisaged, where the order of accuracy of the schemes are kept the same while grid spacings are varied alternately along each spatial direction, this represents a first attempt in the study of the influence of spatial resolution in the Direct Numerical Simulation of flows around elongated rectangular cylinders with sharp corners.

• Wind and Structures
• /
• 제35권4호
• /
• pp.243-253
• /
• 2022

The conformal mapping method (CMM) has been broadly exploited in the study of fluid flows over airfoils and other research areas, yet it's hard to find relevant research in bridge engineering. This paper explores the feasibility of CMM in streamlined box girder bridges. Firstly, the mapping function transforming a unit circle to the streamlined box girder was solved by CMM. Subsequently, the potential flow solution of aerostatic pressure on the streamlined box girder was obtained and was compared with numerical simulation results. Finally, the aerostatic pressure attained by CMM was utilized to estimate the aerostatic coefficient and flutter performance of the streamlined box girder. The results indicate that the solution of the aerostatic pressure by CMM on the windward side is satisfactory within a small angle of attack. Considering the windward aerostatic pressure and coefficient of correction, CMM can be employed to estimate the rate of change of the lift and moment coefficients with angle of attack and the influence of the geometric shape of the streamlined box girder on flutter performance.

• 한국산학기술학회논문지
• /
• 제10권1호
• /
• pp.52-57
• /
• 2009

본 논문은 실내 외의 온 습도변화에 따른 효율변동을 고려하여 폐열회수 환기장치의 성능을 예측할 수 있는 프로그램을 개발하였다. 국내의 외기조건에서 폐열회수 환기장치의 성능에 대한 기초자료를 얻기 위하여 고효율기자재 인증조건을 만족하는 풍량 $250m^3/h$의 일본 M사의 제품을 선정하였다. 폐열회수 환기장치를 설치할 경우 서울은 난방부하 69.1%, 냉방부하 59.4%의 절감효과가 나타났고, 부산은 난방부하 66.4%, 냉방부하 59.6%의 절감효과가 나타났다. 동절기의 가습부하는 강릉이 3월에 $0.737{\ell}/h$의 최대 가습부하가 발생하고, 하절기의 제습부하는 목포가 8월에 $1.008{\ell}/h$의 최대 제습부하가 발생한다. 동절기에 남부지방과 동해안지역은 배기측에 응축 또는 응결이 발생하지 않으나 그 외의 지역은 발생한다. 따라서 남부지방과 동해안지역을 제외한 지역에서는 동절기에 배기측에 응축 또는 응결이 발생하지 않도록 방지책을 강구하여야 한다.

• 생물환경조절학회지
• /
• 제23권4호
• /
• pp.293-302
• /
• 2014

본 연구에서는 배추 재배에 적합한 규격과 생육 환경을 조성해 줄 수 있는 비가림하우스를 개발하고자 하였다. 전국 53개 배추 비가림재배 농가를 대상으로 비가림하우스 구조실태 및 구조개선 희망사항을 조사하여 비가림하우스 폭과 높이를 설정하였다. 비가림하우스 규격은 농기계 작업의 용이성, 농가의 의견 등을 고려하여 폭 6m, 처마높이 1.6m, 지붕높이 3.2m로 결정하였다. 서까래 규격별 구조안전성과 설치비를 분석한 후 설치비가 가장 적게 드는 Ø$25.4{\times}1.5t$ 파이프를 서까래로 하고 그 간격이 90cm인 모델을 기본 규격으로 결정하였다. 이 규격은 풍속 $27m{\cdot}s^{-1}$, 적설 17cm에 안전하기 때문에 이보다 기상하중이 큰 지역에는 적용하기가 곤란한데, 이를 해소하기 위해 피복재를 용마루까지 열어 골조 피해를 예방할 수 있는 구조로 설계하였다. 비가림하우스 양 측면에 있는 수동개폐기를 돌려 하우스밴드를 느슨하게 풀어주고 제어반에서 열림버튼을 누르면 개폐모터가 가이드 파이프를 따라 올라가면서 피복재가 용마루까지 개방된다. 피복재를 완전 개방할 경우 해충으로 인한 피해가 우려되므로 농가에서는 이를 막기 위해 방충망을 설치할 수 있다. 배추를 재배하는 기간에 태풍이 지나갈 수 있기 때문에 방충망이 구조안전에 미치는 영향을 분석하였다. $40m{\cdot}s^{-1}$의 바람이 방충망으로 덮여있는 비가림하우스 측면에 수직으로 작용하는 조건에 대해 유동-구조 연성해석 기법을 이용하여 구조안전성을 분석하였다. 유동해석 결과, 피복재 부분은 바람의 영향을 그대로 받기 때문에 피복재 표면에 압력이 크게 작용하였다. 방충망 부분에도 풍하중이 작용하였으나 피복재 부분보다는 압력이 작게 작용하고 분포가 균일하였다. 유동해석에서 도출된 압력 데이터를 적용하여 구조해석한 결과, 최대응력은 파이프의 끝단 즉, 지면부분에서 나타났으며, 그 값은 54.6Mpa이었다. 구조안전 판단 기준인 파이프의 허용응력 215MPa 이내여서 구조적으로 안전한 것으로 판단되었다.