• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.269-269
• /
• 2022

Pre-harvest sprouting (PHS) on rice panicles is getting problematic in recent several years in Korea due to climate changes such as high temperature and more frequent typhoons during harvesting season. PHS negatively affects grain quality severely and also yield. Genetic improvement of Korean varieties (Oryza sativa ssp. japonica) through a marker assisted-backcross breeding (MAB) with the known PHS resistant genes must be one of ideal solutions. However, the final breeding products of MAB occasionally exhibit unwanted traits, especially the cross between genetically distant parents. This might be caused by linkage drag and/or presence of the gene-unlinked donor introgressions, resulting that the final products could not be released to the farmers. The major PHS resistance gene, Sdr4 (Seed dormancy 4) originated from an indica cultivar, Kasalath was selected as a donor gene. In order to avoid unexpected phenotypes in the breeding products, we performed a precision marker-based breeding (PMBB) consisting of foreground, recombinant, and background selections (FS, RS, and BS) which aim to develop 'single small introgression lines' (~100 kb introgression). Korean varieties (Ilpum and Gopum) were crossed with Kasalath. We developed Sdr4-allele specific markers for FS and a set of polymorphic flanking markers near the Sdr4 (-350kb and +420kb) for RS. To minimize linkage drag, the small introgression (< 125kb) containing Sdr4 was selected in Ilpum background (BC₂F₄) through 1^st RS with ~1,200 F₂ or BC₁F₂ plants (one side trimmed) and then 2^nd RS with ~1,000 progenies from the 1^st RS selected plants (another side trimmed). After RS, the selected lines were genotyped by using Infinium 7K SNP chip to detect other donor introgressions and the lines were backcrossed. Currently BS is on-going from the backcross-derived progenies with BS markers to remove residual introgressions. During the PMBB process, genetic effect of Sdr-4-Kasalath allele was confirmed in Ilpum and Gopum backgrounds by PHS phenotyping using the segregating BC₂F₃ or BC₁F₄ materials. The Sdr4 PMBB lines in Ilpum background (< 125kb introgression) will be valuable genetic resources to improve PHS resistance in modem popular temperate japonica varieties.

• 대한기계학회논문집B
• /
• 제36권11호
• /
• pp.1135-1140
• /
• 2012

마스크를 이용하여 니켈 시드층의 형성 후 실버 도금을 통해 태양전지 상부전극을 형성하는 2 단계 전극형성 공정이 태양전지의 고효율화 방안으로 제안되었다. 본 연구에서는, 자외선 경화형 혹은 상변화 잉크를 고비용의 인쇄공정을 통해 마스크를 형성하는 방법을 대신하여, 코팅과 레이저의 복합공정을 통해 마스크를 형성하는 방법에 대해 제안하도록 한다. 마스크를 형성하는 물질로서 저비용의 저융점 왁스 혹은 플루오르카본 용액을 태양전지 웨이퍼 상에 코팅 후 레이저로 선택적으로 제거하여 전극패턴을 형성하였으며, 플루오르카본 용액 코팅이 왁스 코팅보다 패턴 균일도 측면에서 우수할 뿐만 아니라 통계적으로 0.16% 태양전지 효율증대를 유발한다는 점이 발견되었다.

• 원예과학기술지
• /
• 제35권4호
• /
• pp.510-522
• /
• 2017

To better understand the morphological variation for Perilla crop in different areas of China, we studied the morphological variation in 87 accessions (84 cultivated var. frutescens and three cultivated var. crispa) from high latitude (Northeast China) and middle latitude (North and Northwest China) areas of China by examining seven quantitative and 10 qualitative characters. Analysis of the morphological variation determined that there was significant morphological differences in five quantitative traits between cultivated var. frutescens and cultivated var. crispa, including effective number of branches (QN2), number of internodes (QN3), number of branches (QN4), length of the largest inflorescence (QN5), and days from germination to flowering (QN7). However, two quantitative traits-plant height and number of florets of the largest inflorescence-did not show any significant differences between cultivated var. frutescens and cultivated var. crispa. In addition, significant differences for six quantitative traits were found between the accessions of cultivated var. frutescens originating from high and middle latitude areas in China, which included QN2, QN3, QN5, number of florets of the largest inflorescence (QN6), and QN7. Principal components analysis (PCA) identified five quantitative characters [plant height (QN1), QN2, QN3, QN4, QN7] and six qualitative characters [fragrance of plant (QL1), color of reverse side of leaf (QL3), degree of pubescence (QL5), color of flower (QL6), shape of leaf (QL7), and hardness of seed (QL10)] that contributed to the positive direction on the first axis. The other quantitative and qualitative characters contributed to the negative direction on the first axis. Most accessions of cultivated var. frutescens and cultivated var. crispa were clearly separated by the first axis. In addition, most accessions of cultivated var. frutescens are from high latitude and middle latitude areas that were clearly separated by the first axis, except for several accessions. The findings from this study will provide useful information towards understanding the morphological variation of Perilla crop according to geographical distribution in high and middle latitude regions of China.

• 한국수산과학회지
• /
• 제30권4호
• /
• pp.634-639
• /
• 1997

한국산 갯지렁이류 중에서 산업적으로 가장 중요한 청충의 양식기법 개발에 관한 기초자료를 얻기 위하여, 청충의 서식생태에 관하여 조사한 결과는 다음과 같다. 1. 청충은 입경이 0.10mm 이하인 저질에서 가장 좋은 일간 성장률과 생존율을 보였다. 2. 유리 수조 실험 결과, 청충이 저질 속에 잠입하여 만든 굴의 형태는 J형, L형, O형, S형, Y형 및 I형 등이 었고, 한 개의 굴에 한 개체가 서식하는 것이 일반적이었으며, 배설시 청충의 체위는 굴 속에서 두부와 미부를서로 반전하여 항문을 굴밖의 저질 표면에 노출 시킨채로 배설하였다. 3. 청충이 저질속에 잠입하는 깊이는 10cm 전후의 저질이며, 먹이를 먹기 위해서는 굴 밖으로 몸체를 완전히 이탈하여 이동하였다.

• 한국결정성장학회지
• /
• 제25권3호
• /
• pp.85-92
• /
• 2015

SiC 결정은 전력반도체 소자용 소재로서 지금까지 외국은 물론 국내에서도 많은 연구가 이루어지고 있으며, 지금까지 고주파 유도가열 방식을 이용한 승화법으로 성장되어 왔다. 그러나, SiC 단결정은 결정 성장 계면에서의 온도 안정성에 따라 쉽게 다른 다형으로 성장하기 때문에, 고품질의 결정을 얻기 위해서는 결정성장 계면에서의 안정적인 온도 구배가 필요하다. 본 논문에서는 저항가열 방식을 이용한 승화법 성장 장치를 이용하여 종자결정을 사용하지 않은 상태에서 SIC 다결정상을 성장하여 보고, 성장 양상에 대하여 고찰하고자 하였다. SiC 다결정상은 성장속도 0.02~0.5 mm/hr로 성장되었으며, 성장된 SiC 다결정상의 두께는 0.25 mm~0.5 mm이고, 이 때 도가니 하부의 온도는 $2100{\sim}2300^{\circ}C$, 성장 압력은 10~760 torr의 범위에서 조절되었다. 성장된 다결정상 결정은 광학현미경으로 관찰하여, 성장 거동을 고찰하였다.

• 한국결정성장학회지
• /
• 제23권3호
• /
• pp.129-134
• /
• 2013

사파이어($Al_2O_3$) 단결정 웨이퍼는 청색 LED(light emitting diode) 제작을 위한 핵심 소재로 사용되고 있으며, 사파이어 단결정의 품질에 따라 LED의 성능이 크게 좌우하게 된다. 여러 가지 사파이어 단결정 제조방법 중 키로플러스(Kyropoulos)법은 도가니 직경에 근접한 크기로 잉곳 생산이 가능하며, 내부 전위밀도가 낮아 고품질의 대구경 사파이어 잉곳 제작이 가능하다. 키로플러스법 공정에서 용융 알루미나의 유동은 seed의 성장 형태, 도가니 및 단열재의 형상에 영향을 받으며, 유동양상에 따라 단결정 사파이어 잉곳의 품질이 좌우된다. 특히 온도구배는 hot-zone 내부의 히터 구조와 밀접한 관련이 있으므로 본 연구에서는 도가니 단위표면적당 하부와 측면 히터의 발열비율에 따른 CFD(computational fluid dynamics) 해석을 실시하고, 해석결과를 토대로 각각 용융 알루미나의 유동 및 remelting 현상에 대해 분석하였으며, 이상적인 히터 발열비율을 도출하였다.

• Parasites, Hosts and Diseases
• /
• 제52권6호
• /
• pp.653-659
• /
• 2014

Surgery remains the preferred treatment for hydatid cyst (cystic echinococcosis, CE). Various scolicidal agents have been used for inactivation of protoscolices during surgery, but most of them are associated with adverse side effects. The present study aimed to evaluate the in vitro scolicidal effect of Nigella sativa (Ranunculaceae) essential oil and also its active principle, thymoquinone, against protoscolices of hydatid cysts. Protoscolices were aseptically aspirated from sheep livers having hydatid cysts. Various concentrations of the essential oil (0.01-10 mg/ml) and thymoquinone (0.125-1.0 mg/ml) were used for 5 to 60 min. Viability of protoscolices was confirmed by 0.1% eosin staining. Furthermore, the components of the N. sativa essential oil were identified by gas chromatography/mass spectroscopy (GC/MS). Our study revealed that the essential oil of N. sativa at the concentration of 10 mg/ml and its main component, thymoquinone, at the concentration of 1 mg/ml had potent scolicidal activities against protoscolices of Echinococcus granulosus after 10 min exposure. Moreover, thymoquinone (42.4%), p-cymene (14.1%), carvacrol (10.3%), and longifolene (6.1%) were found to be the major components of N. sativa essential oil by GC/MS analysis. The results of this study indicated the potential of N. sativa as a natural source for production of a new scolicidal agent for use in hydatid cyst surgery. However, further studies will be needed to confirm these results by checking the essential oil and its active component in in vivo models.

• 한국자원식물학회지
• /
• 제22권3호
• /
• pp.266-272
• /
• 2009

Morphological characteristics of leaves, trichomes and acorns were investigated in 6-year-old artificial hybrids of Q. aliena ${\times}$ Q. mongolica var. crispula and Q. serrata ${\times}$ Q. mongolica var. crispula. Leaf shapes of Q. aliena ${\times}$ Q. mongolica var. crispula $F_{1}$ were obovate and resembled to that of Q. aliena. But several characters including the size of leaf and petiole and the shape of leaf base resembled to those of Q. mongolica var. crispula. In F1 hybrids, small stellate hairs distributed sparsely on the abaxial surface and their lay length was intermediate between both parents. There were no big differences on characters of nuts and cupules between both parents and $F_{1}$ hybrids. Leaf shapes of Q. serrata ${\times}$ Q. mongolica var. crispula $F_{1}$ were obovate-elliptic, and the leaf shape and leaf base and the length of petiole resembled to those of Q. mongolica var. crispula, but leaf size and serration resembled to those of Q. serrata. The number of serration in a leaf was intermediate between both parents. Small stellate hairs distributed sparsely and large single hairs were mixed on the reverse side of leaves. there were no big differences on the number and size of stellate hairs between $F_{1}$ hybrid and Q. serrata. It is able to distinguish $F_{1}$ hybrids from both parents by the size leaf size and shapes, leaf base and serration, petiole length and trichome type in the leaf.

• 지질공학
• /
• 제6권2호
• /
• pp.65-81
• /
• 1996

Friar Tuck 폐광산은 인디아나주 남서부 Tuck Greene-Sullivan 군 경계에 위치하고 있다. 현재 진행중인 복구작업이 시행되기 전, Friar Tuck 광상은 인디아나주 내에서 가장 규모가 크고 환경오염상태가 심각한 폐탄광중의 하나였다. 직접 식물재배법이 tailing ponds에 적용되었다. 버럭더미는 산성수의 오염을 막고 토양이 외부로 흘러 나가는 것을 방지하기 위해 표면을 고른 후 토양오염이 비교적 덜 된 흙으로 덮고 농업용 석회석, 화학비료 및 퇴비를 뿌려 풀 종자를 심었다. 사면의 침식방지를 최소화 하기 위하여 terrace, diversion ditch, 및 gabion structures가 설치도었다. 산성수 처리를 위하여 실내 및 광산현장에서 인회석을 이용한 새로운 방법이 실험되었다. 인회석은 산성수 본래의 pH를 유지하면서 철 및 알루미늄을 효과적으로 제거하였다. 광산폐기물에서 파생되는 산성수 내의 철 및 알루미늄의 농도가 높은 경우에도 이 방법을 사용할 수 있을 것으로 사료된다.

• 한국환경복원기술학회지
• /
• 제21권4호
• /
• pp.75-86
• /
• 2018

This research was thereby made to study and analysis ecological, landscape, and stability qualities of roadside cut Slopes in expressways and national highways that went through revegetation works. Also, evaluation items and framework for integrated assessment of plant structure and restored state for the maintenance were suggested. Following is the summary of the result. firstly, for stabilization of introduced native plant species on roadside cut slops, assessment on the post-project environmental management through long-term monitoring and maintenance works must be made. It signifies a form of authentic recovery and restoration by the native plants. second, current evaluation framework on the test beds is well managed with clear evaluation standards and table while its method of assessing the post management with only test bed results lacks conformity with this study site. Newly developed evaluation framework on the post construction sites is estimated to be used as assessment standards on any roadside construction sites. Third, after site investigation distinction was observed among different revegetating construction types in the long-term perspective. Due to the different duration time of vegetation state between seed-spray measures(degraded in time) and layer-spray measure(maintained), the use of coarse straw-mat mulching work or Coir net was suggested in long term maintenance of cut slopes. forth, segmentation of post environmental assessment is organized into three large categories of "ecological", "stabile", and "landscape" qualities regarding post restoration quality and stability of slope through native plants with which categories marks 50, 30, 20 points of rates. fifth, components of the post environmental assessment were segmented in twelve categories driving results from former experimental construction and newly focused items on site. In the future, it is possible to propose a customized assessment method considering the location and location of construction work if the research on the application of post-environment assessment methods for road construction surface recording is conducted systematically.