• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.366-369
• /
• 2001

In this study, the matrix Organic Electroluminescence (OEL) device, that was consisted of R,G,B pixels. We fabricated OEL devices by side by side methode and, used organic material Alq3 as green, DCM as red and Butyl PBD as blue ETL. We investigated the characteristic of brightness and current density for matrix OEL device. As the results, each color devices has minimum about $100cd/m^{2}$ brightness and maximum luminescence was $2500cd/m^2$ in green OEL device.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집
• /
• pp.366-369
• /
• 2001

In this study, the matrix Organic Electroluminescence (OEL) device, that was consisted of R,G,B pixels. We fabricated OEL devices by side by side methode and, used organic material Alq3 as green, DCM as red and Butyl PBD as blue ETL. We investigated the characteristic of brightness and current density for matrix OEL device. As the results, each color devices has minimum about 100 cd/㎡ brightness and maximum luminescence was 2500cd/㎡ in green OEL device

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제54권12호
• /
• pp.585-587
• /
• 2005

In this paper, We studied two methods to measure optical characteristics of an electrodeless light source using the integrating sphere(diameter 1.5m). One is to use a center measurement method and the other is to use a side measurement method. As a result of analysis, a side measurement methode without auxiliary lamp is almost similar against a center measurement with auxiliary lamp to reduce a measurement of an error for luminous flux, luminous efficacy and spectral distribution etc. Therefore, Sample which cannot measured by reason of big size and heavy weight can be measured by a side measurement method.

• 한국자동차공학회논문집
• /
• 제15권4호
• /
• pp.83-93
• /
• 2007

This paper represents the development of 3-axises loadcell for measuring the side-force of suspension module of MPV(Multi Purposed Vehicle). The side force causes the failure of damper, such as leakage. The loadcell was developed using strain gauges, and the Wheastone bridge circuit to compensate for the cross-talk between the each axises and the measurement error by temperature. Structure analysis of loadcell was accomplished with FEM(Finite Element Method) to optimize the location of strain gages. The design optimization for important factors that have an effect on performance of loadcell was accomplished by using DOE(Design of Experiment). Loadcell was produced and successfully tested, showing good sensitivity and low cross-talk. The cross-talk of the developed loadcell is bellow 5%. The load history was measured at proving ground. The maximum side-force, the longitudinal force, and vertical force of MPV are 4.2 kN, 8.0 kN, and 17.0 kN, respectively, at Belgian road.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2008년도 춘계학술대회 논문집
• /
• pp.603-609
• /
• 2008

개발품의 품질을 평가하기 위해 무엇을 어떻게 시험할 것인가 적합한 모델을 정하는 것은 중요하다. 개발된 제품의 대부분의 패키지화된 소프트웨어는 소스코드를 공개하지 않으므로 외부적인 동작 특성을 측정하여 평가한다. 고속철도 선로변 정보처리 기기는 단일계로 구성되어 있던 것을 최근에 2중화하므로 신뢰성을 향상하도록 개발하였다. 철도에 사용되는 용품에 대하여 성능 및 안전성을 확보하기 위하여 철도안전법에서 공인시험기관에서 품질인증을 받을 수 있도록 하고 있어 우선 규정의 적용 가능성을 검토를 하였다. 아울러 정보처리모듈 일반 및 전용 그리고 절체기에 대하여 H/W 와 S/W의 검증을 위하여 필요한 절차와 성능을 확인하는 방안을 검토하고, TFM(Track-side Functional Module) Tester기와 Simulator를 활용하여 보드별 성능시험을 하는 방안에 대하여 고찰하고자 한다.

• 한국재료학회:학술대회논문집
• /
• 한국재료학회 1997년도 한국재료학회 춘계학술발표회
• /
• pp.38-38
• /
• 1997

In the paper, we investigate the magneto-impedance(MI) effect of the Fe-Co-B Amorphous magnetic film, the amorphous magnetic film having near zero magnetostostriction is fabricated by using the sputtering methode, and then annealed in magnetic field. When the external magnetic field is directly applied to the fabricated film, the voltage amplitude between both side of the magnetic film varies about 22% at 10[MHz] and the impedance varies about 21% at 10[Oe]. Thus, we find that the fabricated magnetic film has the characteristics of high-quality sensor element.

• 조명전기설비학회논문지
• /
• 제26권7호
• /
• pp.45-51
• /
• 2012

In this paper, the wireless power transfer system using the magnetic resonance was designed and the effect of resonant coil radius and load resistance to this system was analyzed by the circuit analysis method. As a result, the calculated transmitted-power is similar to measured one, and the coil size has a small effect to the coupling coefficients in the resonant frequency band. In addition, the fact that the calculated transmitted-power according to the source frequency is similar to measured one confirms that the circuit analysis methode in this paper is valid. The input side transmission efficiency ${\eta}_i$ including only the loss in the power transfer circuit is almost 90[%] with the large coil in the 10[cm] transfer distance, and 65[%] with the small coil in 1[cm]. The source side transmission efficiency ${\eta}_s$ is 30~40[%] at both coil when load resistance below 4.7[${\Omega}$] has been connected. Considering that the maximum ${\eta}_s$ is 50[%], this is valid in the practical applications.

• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.266-273
• /
• 2006

선형유도전동기의 순시 속도에서의 1,2차 상대 위치이동으로 나타나는 동 특성과 이 때의 단부효과를 고려한 등가회로 해석방법을 이용하여 시스템을 모델링하고 SVPWM 구동시스템에 적용한 정속도 제어 특성을 부하조건에 따른 동작특성으로 시뮬레이션하여 SVPWM 구동 편측형 선형유도전동기시스템에 적용가능성을 입증하였다.

• 한국자동차공학회논문집
• /
• 제12권5호
• /
• pp.101-107
• /
• 2004

Recently the objective of vehicle design was focused on the crash safety and the energy saving. For the energy saving vehicle structures must be light weight, but for the crash safety some energy absorbing elements must be added. In this paper hybrid structure which consists of a steel and a FRP was studied on the energy absorption characteristics under the impact load by finite element method. Test results of the other researchers were compared with that of computer simulation on this simple hybrid structure. Side rail of vehicle front structure was replaced with hybrid materials for the application of the vehicle structure. 35mph frontal crash simulation was performed with hybrid structure and with conventional steel structure. By the adoption of hybrid structure, the improvement of energy absorption characteristics and reduction of weight was observed under the frontal crash simulation.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2005년도 춘계종합학술대회
• /
• pp.245-251
• /
• 2005

선박의 자동조타기에는 반드시 방위정보가 필요하며, 방위정보를 제공하는 장비로는 자이로콤파스, 지자기 콤파스 및 GPS 콤파스가 있다. 자이로콤파스는 안정된 동작을 하지만 고가형이므로 주로 대형선박에서 사용되고 있으며, 중소형 선박에서는 저가형의 지자기콤파스 및 GPS 콤파스가 사용되고 있다. 본 연구에서는 지자기콤파스와 GPS 콤파스에서 각각의 단점을 보완하는 방식으로 안정된 방위정보를 제공하는 병행알고리즘의 전자콤파스를 구현하였다.