• The Journal of Korean Academy of Prosthodontics
• /
• v.34 no.1
• /
• pp.31-69
• /
• 1996

The purpose of this investigation was to analyze stress distribution in implant supporting tissue according to different types of attachments such as combination bar attachment, Hader bar attachment, O-Ring attachment and Dal-Ro attachment that are used in mandibular overdenture by using two osseointegrated implants, to study the influence that POM IMC used in bar type attachment has in implant supporting tissue and compare the preceding analyses to find out an effective stress distribution method. Three dimensional photoelastic method was used to obtain the following results. (A) Analysis of stress distribution according to attachment type 1. Under vertical load condition, compressive stress was seen at implant supporting area of working side on all the photoelastic models but in Hader bar attachment tensional stress was seen at distal upper area of implant supporting area. Relatively Hader bar and O-Ring attachment showed even stress distribution pattern. 2. Under vertical load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models. 3. Under $25^{\circ}$ lateral load condition, general compressive stress was seen at working side implant supporting area in most of the models, especially at distal upper supporting area higher compressive stress concentration was seen in combination bar attachment and tensional stress concentration, in Hader bar attachment. 4. Under $25^{\circ}$ lateral load condition, compressive stress at implant apex area and tensional stress at implant lateral supporting area were seen at nonworking side of all models, except O-Ring model which showed compressive stress only. (B) Influence of POM IMC to stress distribution in bar type attachment 5. Under vertical load condition, better stress distribution pattern was seen at working side of combination bar and Hader bar attachment model using POM IMC. 6. Under vertical load condition, stress value was increased at nonworking side of combination bar attachment model using POM IMC and tendency of increasing compression was seen at nonworking side of Hader bar attachment model using POM IMC. 7. Under $25^{\circ}$ lateral load condition, better stress distribution pattern was seen at working side of combination bar attachment model using POM IMC but tendency of increasing stress was seen on working side of Hader bar attachment model using POM IMC. 8. Under $25^{\circ}$ lateral load condition, stress reduction was seen at nonworking side of combination bar attachment model using POM IMC but tendency of increasing stress was seen at nonworking side of Hader bar attachment model using POM IMC.

• Computational Structural Engineering
• /
• v.10 no.4
• /
• pp.165-175
• /
• 1997

In this paper, the stress, buckling and vibration analyses have been performed for several case with the spot weld stiffened rear side frame, the unstiffened rear side frame and the dual thickness laser weld rear side frame. For stress and vibration analyses, the clamped boundary condition with spring supports are used. But for the buckling analyses, the both ends simply supported boundary conditions are used. For the nummerical analyses, ANSYS 5.0 code is adopted. Maximum stress of the spot weld stiffened rear side frame occurs in the main frame and is 80.9 MPa. Maximum strain is 501 .mu.. The maximum stress of the dual thickness laser weld rear side frame of 1.8mm thickness structure is equal with the stress of spot weld stiffened frame. The weight of dual thickness laser weld frame can be reduced about 17.2%. For the stiffened spot weld rear side frame with both ends simply supported boundary conditon, the bucking load is 52.54 kN. When the thickness of the dual thickness laser weld rear side frame become 1.9mm thickness structure, the buckling load of the stiffenerd rear side frame is equal to that of dual thickness laser weld frame. The reduction of the structure weight is about 5%. The fundamental natural frequency of the stiffened spot weld rear side frame for bending mode is 163.6 Hz and that of the dual thickness laser weld rear side frame is 179.8 Hz.

• Journal of Biomedical Engineering Research
• /
• v.25 no.6
• /
• pp.489-496
• /
• 2004

Insertion of cannulae into vessels may disturb the blood flow doing non-physiological load and stress on blood cells such that ADP may increase and result in hemolysis. Authors used the computational method to simulate the 3-dimensional blood flow inside of the cannula using numerical method. We limited the research to within the drainage cannulae with side holes inserted through the human vein. In this paper, 9 different cannulae with side holes categorized by the number of side holes of 4, 12, and 20, and also categorized by the array type of side holes of staggered array, in-line array, and alternative in-line array were studied and compared to the cannula with no side holes by using CFD analysis. We evaluated the flow rate, the wall shear stress, and the shear rate and compared them with one another to estimate the effect of the side holes. The flow rate is not proportional to the number of the side holes. However, larger number of side holes can reduce the mean shear rate. Both the number and the array type of side holes play an important role on the fluid dynamics of the blood flow in cannulae.

• Journal of Legislation Research
• /
• no.41
• /
• pp.201-228
• /
• 2011

In 97hu2200, the Supreme Court of Korea suggested five requirements to apply the doctrine of equivalents, i.e. identity of problem-solving principles, interchangeability, ease of interchangeability, exception of known arts and file-wrapper estoppel. There have been arguments on whether the standard of ease of interchangeability could be regarded as the same as the obviousness standard in deciding patentability. The side who thinks that they are different (hereinafter, the side of difference) considers that the standard of ease of interchangeability is narrower than the obviousness standard. This side criticizes the side who thinks that they are the same each other (hereinafter, the side of the same) on the reason that doctrine of equivalents can be overly expanded. On the other hand, 'the side of the same' argues that every accused invention having no inventive step from the perspective of the patented invention should be considered to infringe. 'The side of the same' points that if the standard of ease of interchangeability is considered as narrower than the obviousness standard, 'grey area' should exist where the patent law cannot work. The difference between the two side may cause contradictory results in the decision of infringement under the doctrine of equivalents. Because 'the side of difference' construes claims narrowly than 'the side of the same,' an accused invention in the grey area is not regarded to infringe. 'The side of the same,' however, considers the accused invention to fall into the scope of the patent under the doctrine of equivalents. This paper concludes that the standard of ease of interchangeability should be regarded as the same as the obviousness standard from the perspective of economics of innovation.

• PNF and Movement
• /
• v.13 no.4
• /
• pp.181-188
• /
• 2015

Purpose: This study aimed to examine the effects of proprioceptive neuromuscular facilitation (PNF) lower extremity patterns combined with elastic bands applied to stroke patients diagnosed with hemiplegia through self-training using the non-paralyzed side approach and the paralyzed side approach, and to investigate the differences in the effects. Methods: Nine chronic stroke patients who were being treated not more than twice a week at H, K, R, and C hospitals located in Gangwon-do, performed self-training for 16 minutes, two times per day for four weeks between August and October 2015. The subjects' balance ability was measured using the Tetrax stability index, the weight distribution index, the Berg Balance Scale (BBS), and the Timed Up and Go (TUG) test before the experiment and four weeks later. Among the statistical methods, paired t-tests were conducted for intra-group comparison of the measurements taken before and after the experiment, and independent t-tests were conducted for inter-group comparison of the ex post facto values. The statistical significance level was set to 0.05. Results: When the lower extremity patterns were applied to the non-paralyzed side group and the paralyzed side group, significant intra-group differences were observed for the Tetrax stability index, the weight distribution index, the Berg Balance Scale (BBS), and Timed Up and Go (TUG) tests (p<0.05); however, the inter-group comparisons showed no significant differences. Conclusion: The non-paralyzed side approach was found to be easy for patients to participate in and it also affected the patients' paralyzed side. Although the paralyzed side approach produced good exercise effects in a short period of time, it could result in adverse effects, such as a decrease in motivation and self-confidence. Therefore, these approaches are considered to be more effective when they are selectively applied depending on the purpose of the intervention and the degree of a patients' participation.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.49 no.2
• /
• pp.95-106
• /
• 2021

Side-jets enable the immediate maneuver of a missile compared to control surfaces; however, they may cause adverse effects on aerodynamic coefficients, for they interfere with freestream. To find out the impact of side-jets on aerodynamic coefficients, we simulate side-jets as air gas and utilize multi-fidelity models to evaluate differences between aerodynamic coefficients obtained with and without side-jets. We computed differences in aerodynamic coefficients to investigate side-jet effects for the changes of a Mach number, a bank angle, and an angle of attack. As a result, asymmetrically developed side-jets affect the longitudinal force and moment coefficients, and the lateral force and moment coefficients drastically change in-between -30 and 30 degrees of bank angles. In contrast, side-jets hardly influence the axial force coefficients. As for the axial moment coefficient, we could not determine the side-jet effect due to a lack of aerodynamic coefficient samples in the Mach number. All in all, we confirm that side-jets lead to the change of a missile attitude as they considerably vary the longitudinal and lateral aerodynamic coefficients.

• Development and Reproduction
• /
• v.18 no.2
• /
• pp.79-87
• /
• 2014

In Pleuronectiformes, blind-side malpigmentation (hypermelanosis) is common in cultured flatfishes, and is economically important. To understand the mechanism of blind-side hypermelanosis in flatfishes, we examined when the malpigmentation initially occurred, and studied how the symptoms proceeded during early development of the starry flounder, Platichthys stellatus. To assess quantitative pattern changes of blind-side skin, we observed morphological development of the whole body from 22 (total length [TL] $10.0{\pm}0.2$ mm and body weight [BW] $8.8{\pm}0.57$ mg) to 110 days (TL $23.4{\pm}0.7$ mm, BW $193.6{\pm}23.3$ mg) after hatching (DAH), and also examined the malpigmented area rate of blind-side skin and the malpigmented fish ratios. The experimental animals were reared in fiberglass-reinforced plastic (FRP) tanks in water at a temperature of $18.9{\pm}1.9^{\circ}C$ and salinity of $32.6{\pm}0.6$ psu and were fed with rotifer and Artemia nauplii from 22 to 48 DAH, and with A. nauplii and commercial feed from 49 to 110 DAH. As results, the first staining patch seen by the naked eye was observed around the area between the anus and pelvic fin or caudal edge of the trunk at 80 DAH (TL $20.6{\pm}0.5$ mm, BW $112.5{\pm}8.8$ mg). The pigmented area and the pigmented fish ratios were significantly increased from 80 to 110 DAH. These results indicated that malpigmentation on the blind side of starry flounder was initially observed at about 2 cm in length and 100 mg in weight, and the pigmented domain on the blind-side skin was continually broadened by the differentiation of pigmented cells (melanophores and xanthophores) with growth.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.2
• /
• pp.205-212
• /
• 2013

This paper presents the results of a numerical study on the effects of a side guide on the top and tail camber. The temperature distribution on the surface of an actual hot-rolled bar was measured using a thermal imager. The measured temperatures were incorporated with finite element analysis, and the thermomechanical behavior of the hot bar was examined. The installation location of the side guide, length of the side guide, and gap between the bar and the insides of the side guide were selected as the parameters to be investigated. The results show that it is more effective to install the side guide at the position where the magnitude of the camber is larger. It is noted that a longer side guide is more effective than a shorter one in reducing the camber. It is also found that the camber decreases in proportion with the guiding gap.

• Journal of Korean Physical Therapy Science
• /
• v.18 no.2
• /
• pp.17-28
• /
• 2011

Purpose: The aim of this study was to ascertain the effects of the lower extremity muscle strengthening exercise on balance and ambulation of children with cerebral palsy. Methods: 10 subjects who participated in this research undertook the 12-week the lower extremity muscle strengthening exercise program, which consisted of a series of mat exercises and sling exercises. The statistical significances were examined by using Wilcoxon signed-rank test, a non-parametric test, for evaluating the improvement of balance and ambulation of the subjects. In order to evaluate the correlation among the variables, Pearson's correlation coefficients were also calculated. In all statistical analyses the significance level was selected as ${\alpha}$=0.05. Results: Berg balance scale(BBS) was significantly increased after the intervention(p<.05). Percentage weight bearing(PWB) was decreased after the intervention, but there was no significant difference. Time up and go test(TUG) value was significantly decreased(p<.05). Gait velocities was increased after the intervention, but there was no significance. Stride length, step lengths of the affected side and the sound side were significantly increased after the intervention(p<.05). In the correlation analyses of the measures before the intervention, TUG had significant negative correlation to BBS and gait velocity(p<.05). Stride length, step lengths of the sound side and the affected side had significant positive correlation between themselves(p<.01). In the correlation analyses of the measures after the intervention, TUG had significant negative correlation to BBS and gait velocity(p<.05). BBS revealed significant positive correlations to stride length, step lengths of the sound side and the affected side(p<.05). Stride length, step lengths of the sound side and the affected side had significant positive correlation between themselves(p<.01). Conclusion: Based upon the outcomes as above, it is likely that the muscle strength exercises have substantial effects on balance and ambulation of children with cerebral palsy. Thus various lower extremity muscle strengthening exercise programs are required to be studied and developed in order to contribute to functional improvements of children with cerebral palsy.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.13 no.2
• /
• pp.14-22
• /
• 1976

This research was started to develop a VHF television antenna which secures good pictures in spite of the disturbance from tile rear side. In a year of research, an antenna which front to banck ratio is gyrator than 30dB and whose side lobe level is smaller than -30dB alas been developed. This new antenna was designed log-periodically for the sake of wide frequency bandwidth which is necessary to cover all tile high channel. And it was found having characteristics of anti-interference against the disturbance wave from tole behind, and anti-ghosts from the reflected waves. Furthermore, the gain of this new antenna is reasonablly high, because of its low side lobe level. After all, the developed antenna is silpposcd to increace the service area considervably and to improve the TV receiving certainly.