• 제목/요약/키워드: side

검색결과 25,185건 처리시간 0.039초

하지 석고붕대제거후 정상측과 석고붕대 적용측의 상하지의 둘레, 피부두겹두께 및 하지근력의 비교 (Comparison of the circumference, skinfold thickness and leg strength of normal limb with those of casted limb following removal of leg cast)

  • 최명애;박미정
    • 대한간호학회지
    • /
    • 제23권1호
    • /
    • pp.56-67
    • /
    • 1993
  • The purpose of this study was to compare the circumference and skinfold thickness of upper and lower limb and the leg strength of the casted limb with those of the normal limb after removal of a leg cast. The subjects for the study were orthopedic patients who had had long and short leg casts or splints due to tibial, fibulal, metatarsal, calcaneus fracture or ankle sprains. The subjects were divided into two groups, those who had the cast on for less than 40 days and those for over 41 days. Circumference and skinfold thickness of the upper and lower limb on the side on which the cast was ap-plied were compared with those of the contralateral side after removal of the cast. Circumference and skinfold thickness of the upper and lower limb, and leg strength for those in a cast for under 40 days were compared with those of over 41 days for both the side to which cast was applied and the contralateral side. Measurements were made after removal of the cast. Skinfold thickness was measured by fat caliper, circumference was measured by tape and lower extremity strength was determined with flat foot pressing on an electronic digital health meter in the sitting position. The results can be summarized as follows : 1. The circumference of the upper and lower leg on the side on which the cast was applied, when measured after the cast was removed, were significantly less than those of the normal side, 93.88%, 93.11% each. 2. Skinfold thickness of the quadriceps and gastrocnemius on the side on which the cast was applied were significantly less than those of the normal side when measured after removal of the cast, 85.98%, 82.85% respectively. 3. Leg strength on the side where the cast was applied was significantly 1ss than that on the normal side, 60.20%. 4. There was no difference in the circumference of upper and lower limbs, skinfold thickness or leg strength on the side where the cast was applied between the group which had the cast applied for under 40 days and the group that had it applied for over 41 days. 5. The circumference of the upper arm and lower leg on the normal side for the group that had the cast applied for over 41 days was significantly greater than the group that had the cast application for under 40 days. T ere was no difference between the two groups in the circumference of the forearm and upper leg, skinfold thickness and leg strength in the normal side. From these results, it may be concluded that muscle atrophy was apparent in the casted limb compared to the normal limb, and the circumference of the upper arm and lower leg, and leg strength on the normal side increased after removal of the cast in the group which had the cast on for more than 41 days.

  • PDF

Numerical Investigation of Jet Interaction for Missile with Continuous Type Side Jet Thruster

  • Kang, Kyoung Tai;Lee, Eunseok;Lee, Soogab
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제16권2호
    • /
    • pp.148-156
    • /
    • 2015
  • A continuous type side jet controller which has four nozzles with thrust control devices was considered. It is deployed to a missile for high maneuverability and fast controllability in the terminal guidance phase. However, it causes more complex aerodynamic jet interactions between the side jet and the supersonic free stream than does the conventional impulse type side jet with a small single thruster. In this paper, a numerical investigation of the jet interference effects for the missile equipped with a continuous type side jet thruster is presented. A three-dimensional flow field was simulated by using a commercial unstructured-based CFD solver. The numerical simulation method was validated through comparison with wind tunnel test results for the single jet. The method of defining jet direction for this type of side jet control to minimize simulation cases was also introduced. Flow fields investigation and jet interaction effects for various flow conditions, jet pressure ratios and defined jet direction conditions were performed. From the numerical simulation for the continuous type side jet, extensive aerodynamic interference data were obtained to construct an aerodynamic coefficients database for precise missile control.

악관절기능장애환자(남성)의 교합력에 관한 연구 (A Study of Bite Force of the Male Patients with TMJ Dysfunction)

  • 강규욱;이승우
    • Journal of Oral Medicine and Pain
    • /
    • 제10권1호
    • /
    • pp.63-71
    • /
    • 1985
  • A kinematical study of bite force during voluntary isometric contraction was investigated in 20 Korean men with TMJ dysfunction and 30 Korean men as normal subject, ranging from 20 to 27 years old. The author observed maximum bite force, slope of bite force graph, curve index and duration of maximum bite force with the use of the foil strain gauge (MPM-3000) and RS Dymograph (Beckman). The obtained results were as follows : 1. Maximum bite forces were 29kg and 29kg for left and right side of normal subject (p>0.05) and 19kg and 29kg for affected and non-affected side of TMJ dysfunction patient. 2. The slopes of bite force graph were $68^{\circ}$ and $68^{\circ}$ for left and right side of normal subject (p>0.05) and $59^{\circ}$ and $71^{\circ}$ for affected and non-affected side of TMJ dysfunction patient. (p<0.01) 3. The curve indices were 0.93 and 0.90 for left and right side of normal subject and 1.10 and 0.90 for affected and non-affected side of TMJ dysfunction patient. (p>0.05) 4. The durations of maximum bite force were 424 msec and 413 msec for left and right side of normal subject and 337 msec and 334 msec for affected and non-affected side of TMJ dysfunction patient. (p>0.05)

  • PDF

남성의 동체부 체형분류(제2보) -측면체형의 분류 및 정면과 측면 체형의 조합- (Classification of Men's Somatotype According to Body Shape and Size(Part II) -Classification of Side View and Compound of Front and Side View-)

  • 정재은;김구자
    • 한국의류학회지
    • /
    • 제26권10호
    • /
    • pp.1443-1454
    • /
    • 2002
  • The purposes of this study were to classify body type of adult males into several kind of shape and to provide the characteristics of size of each group which has same shape. As the sample, subjects were 1290 males of 20 to 54 year-old. The procedure and results were follows; 1. As the result of the previous reserch, the front line of body was classified in X, H, Y and A types. 2. The principal component analysis was used to obtain the shape factor of the side line of the trunk. 9 factors in the side were extracted. As the result of the cluster analysis of factor scores, the side line of body was classified in 5 types. It was named X, A, Y and H type in the front and S, D1, d, I and D2 type in the side. 3. In order to consider the shape of body as a whole, the body shape of the front and side were compounded. The whole body shapes of adult male were very various, and 6 body shapes, XS, YS, Yd, YI, AD2 and HD1 were selected as the basic types. In each type of body, several groups were classified by size factor, height and chest girth and master size was selected considering appearance frequency.

Effects of Mulligan's Mobilization with Movement on Talofibular Interval in Subjects with Chronic Ankle Instability

  • Koh, Eun-Kyung;Jung, Do-Young
    • The Journal of Korean Physical Therapy
    • /
    • 제28권5호
    • /
    • pp.303-307
    • /
    • 2016
  • Purpose: This study was conducted to determine the effects of Mulligan's mobilization with movement (MWM) on changes in the talofibular interval in the sagittal plane in subjects with chronic ankle instability (CAI). Methods: Sixteen subjects with chronic ankle instability participated in this study. The talofibular intervals were measured from US images, and the weight-bearing lunge test was used to assess dorsiflexion of the ankle joint. Each dependent variable were measured on the both affected side and sound side in three trials in pre- and post-MWM. Dependent variables were examined with a two-way mixed-design analysis of variance (ANOVA). The two factors were side (sound side versus affected side) and intervention (pre- versus post-intervention). For post hoc analysis, paired t-tests were performed to compare the dependent variables. A p<0.05 was considered to indicate significance. Results: Dorsiflexion and talofibular interval differed significantly pre- and post-intervention (p<0.05). Post-hoc analysis revealed that the talofibular interval post-MWM was significantly less than that pre-MWM on the both the affected and sound side (p<0.05). The ankle dorsiflexion in the post-MWM group was significantly greater than that in the pre-MWM group on the affected side and the sound side (p<0.05). Conclusion: The Mulligan's MWM decreased the talofibular interval in subjects with CAI. These findings suggest that the MWM technique can change the position of the talus relative to the fibular in the weight bearing position.

차량 측면도어 임팩트 빔의 최적설계 및 측면도어 충돌실험에 관한 연구 (Study on the Optimization Design and Impact Experiment of Side Door for Impact Beam in the Vehicle Side Door)

  • 김재열;최순호
    • Tribology and Lubricants
    • /
    • 제31권1호
    • /
    • pp.13-20
    • /
    • 2015
  • The impact beam, a beam-shaped reinforcement installed horizontally between the inside and outside panels of car doors, is gaining importance as a solution to meet the regulations on side collision of vehicles. In order to minimize pelvis injury which is the biggest injury happening to the driver and passengers when a vehicle is subject to side collision, energy absorption at the door impact beam should be maximized. For the inner panel, the thrust into the inside of the vehicle must be minimized. The impact beam should be as light as possible so that the extent of pelvis injury to the driver and passenger during side collision of the vehicle is minimal. To achieve this, the weight of the impact beam, has to be optimized. In this study, we perform a design analysis with a goal to reduce the weight of the current impact design by 30% while ensuring stability, reliability, and comparison data of the impact beam for mass production. We conduct three-point bending stress experiments on conventional impact beams and analyze the results. In addition, we use a side-door collision test apparatus to test the performance of beams made of three (different materials: steel, aluminum, and composite beams).

악관절 폐구성 과두걸림 환자의 하악운동에 관한 연구 (A Study on the Mandibular Movements in the Patients with TMJ Lock Closed)

  • Ji-Won Lee;Sung-Chang Chung
    • Journal of Oral Medicine and Pain
    • /
    • 제15권1호
    • /
    • pp.79-89
    • /
    • 1991
  • The author examined the patterns and various ranges of mandibular movements in TMJ lock closed patients in the frontal, sagittal and horizontal plane and obtained the following results. 1. In the frontal trajectory, the mean amount of maximum mouth opening was 24.4mm and the opening paths were deviated to the affected side in 87.1% of the patients. The mean amount of maximum laterotrusion to the affected side was 10.4mm and that of non-affected side was 7.5mm. There was a significant difference between them(p<0.001). 2. In the sagittal trajectory, the mean amount of the maximum protrusion was 7.0mm, the mean amount of the maximal retrusion was 1.0mm 3. In the horizontal trajectory, the pattern of laterotrusion showed asymmetry: the mean length of non-affected side was smaller than that of the affected side. Protrusive path were deviated to the affected side in 64.5% of the patients, the mean degree of deviation was 16.4$^{\circ}$. The mandibular movements of TMJ lock-closed patients can be characterized by decreased range of mouth opening, protrusive movement, and laterotrusive movement to the non-affected side and also characterized by deviated opening and protrusive path to the affected side.

  • PDF

얼굴 애니메이션을 위한 동적인 근육모델에 기반한 3차원 얼굴 모델링에 관한 연구 (A Study on 3D Face Modelling based on Dynamic Muscle Model for Face Animation)

  • 김형균;오무송
    • 한국정보통신학회논문지
    • /
    • 제7권2호
    • /
    • pp.322-327
    • /
    • 2003
  • 본 논문에서는 효율적인 얼굴 애니메이션을 구축하기 위하여 동적인 근육 모델을 기반으로 한 3차원 얼굴 모델링 기법을 제안하였다. 동적인 근육 모델을 기반으로 얼굴 근육을 256개의 점과 이 점들을 연결한 faceline으로 구성한 wireframe을 구축하고, wireframe을 이용한 표준 모델을 구성한 후 정면과 측면의 두장의 2D 영상을 사용하여 텍스처 매핑을 실시하여 3차원 개인 얼굴 모델을 생성하였다. 정확한 매핑을 위하여 특징점들의 정면과 측면 부분을 이용했는데, 정면 이미지와 정면 특징점들의 2차원 좌표를 이용하여 텍스터 좌표를 가진 얼굴을 만든 다음, 측면 이미지와 측면 특징점들의 2차원 좌표를 이용하여 텍스터 좌표를 가진 얼굴을 구축하였다.

탄성밴드를 이용한 측방 보행 훈련이 뇌졸중 환자의 보행 및 균형에 미치는 영향 (Effects of Side Walking Training with Elastic-Band on Gait and Balance of Stroke Patients)

  • 홍성일;방대혁;신원섭
    • The Journal of Korean Physical Therapy
    • /
    • 제26권5호
    • /
    • pp.372-378
    • /
    • 2014
  • Purpose: The aim of this study was to evaluate the effect of side walking training with an elastic-band on gait and balance ability of stroke patients. Methods: Twenty three patients with stroke participated in the study. Participants were randomly assigned to the side walking with elastic-band group (n=7), the side walking without elastic-band group (n=8), and the walking on the treadmill group (n=8);. 10 m walking test (10MWT), Dynamic Gait Index (DGI), Berg Balance Scale (BBS), and modified Functional Reach Test (mFRT) were performed for evaluatione of pre- and post-intervention in gait and balance ability of participants. Results: Significantly differences in 10 MWT, DGI, BBS, and mFRT were observed between pre- and post-intervention in three groups (p<0.05). Improvement of pre- and post-intervention of mFRT showed significant difference (p<0.05). The highest rate of change was observed in the side walking with elastic-band group and rate of change showed in the order of the side walking without elastic-band group, walking on the treadmill group. Conclusion: This study suggests that side walking training with an elastic-band may help to improve gait and balance ability of stroke patients.

광정횡월류위어의 유량계수 산정 (An Estimation of discharge Coefficient for Broad Crested Side Weir)

  • 윤영배;조홍제
    • 대한토목학회논문집
    • /
    • 제31권1B호
    • /
    • pp.63-70
    • /
    • 2011
  • 횡월류위어를 천변저류지 등의 유입부에 설치하기 위해서는 정확한 월류량을 산정하는 것이 선행되어야 한다. 본 연구에서는 실제 하천에 적용성이 높을 것으로 판단되는 사다리꼴 수로의 광정횡월류위어에 대한 수리실험을 실시하였고, 유량계수산정을 위하여 상류 Froude수, 위어높이, 위어길이, 본류수로폭, 수로경사 등을 고려하였다. 분석결과 광정횡월류위어에서 $h/y_u$, $L/y_u$, $Fr_u$의 중요도가 큰 것을 확인하였고, 다중회귀분석을 통해 유량계수식을 제시하였다. 또한 기존 연구자들의 실험자료와 본 실험의 연구자료를 비교하였으며, 측정된 월류량과 계산된 월류량을 비교하여 유량계수식의 적용성을 확인하였다.