• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2004년도 추계 학술발표회 제16권2호
• /
• pp.493-496
• /
• 2004

The change of creep deformation mechanism due to the persistent change of stress conditions requires the constitutive relation for the analysis of long tenn behaviors considering age dependent material properties of concrete. In the present research, the process of time dependent behaviors in structure is divided into two stages; the non-mechanical deforming level which causes creep and shrinkage deformations, and the mechanical deforming level which causes mechanical deformations by the restraints of non-mechanical deformations due to internal or external factors. The incremental constitutive relation is derived by expanding the total stress-strain relation on the present time, with respect to the reference time using the Taylor series, and the modulus of elasticity in early ages of concrete was defined thru this process.

• 한국주조공학회지
• /
• 제17권5호
• /
• pp.502-509
• /
• 1997

The mechanical behavior and microstructural evolution in the ignition-proof Mg-Zn-Ca-Zr alloy produced by the semisolid squeeze casting are clarified and the mechanical properties are also compared with those of squeeze cast Mg-Zn-Ca-Zr alloy. The tensile strength and elongation increase slightly as the solid fraction depending on temperature decreases, while the 0.2% proof stress decreases. The size of primary crystal increases with increasing holding time. The tensile strength and 0.2% proof stress of the semi-solid squeeze cast Mg-Zn-Ca-Zr alloy decrease as the size of primary crystal increases, indicating the dependence of strength on the size of primary crystal. The elongation of the semi-solid squeeze cast Mg-Zn-Ca-Zr alloy is two times as large as the squeeze cast Mg-Zn-Ca-Zr alloy and the tensile strength is unchanged despite the growth of primary crystal, resulting from the refining of the melted ${\alpha}Mg$ phase and the brittle eutectic compound as well as the reduction of solidification shrinkage and porosities.

• Computers and Concrete
• /
• 제15권4호
• /
• pp.687-707
• /
• 2015

A finite element computer code for short-term analysis of steel-concrete composite structures is extended to study long-term effects under service loads, in the present work. Long-term effects are important in engineering design because they influence stress and strain distribution of the structural system and therefore contribute to the increment of deflections in these structures. For creep analysis, a rheological model based on a Kelvin chain, with elements placed in series, was employed. The parameters of the Kelvin chain were obtained using Dirichlet series. Creep and shrinkage models, proposed by the CEB FIP 90, were used. The shear-lag phenomenon that takes place at the concrete slab is usually neglected or not properly taken into account in the formulation of beam-column finite elements. Therefore, in this work, a three-dimensional numerical model based on the assemblage of shell finite elements for representing the steel beam and the concrete slab is used. Stud shear connectors are represented for special beam-column elements to simulate the partial interaction at the slab-beam interface. The two-dimensional representation of the concrete slab permits to capture the non-uniform shear stress distribution in the horizontal plane of the slab due to shear-lag phenomenon. The model is validated with experimental results of two full-scale continuous composite beams previously studied by other authors. Results are given in terms of displacements, bending moments and cracking patterns in order to shown the influence of long-term effects in the structural response and also the potentiality of the present numerical code.

• 콘크리트학회지
• /
• 제5권2호
• /
• pp.181-188
• /
• 1993

본 논문에서는 철근콘크리트 쉘 구조물의 크리프와 건조수축에 의한 시간의존성 효과를 포함하여 해석할 수 있는 기법을 개발하였다. Degenerate 쉘 요소를 해석에 사용하였으며 층 분할 기법을 이용하였다. 콘크리트의 압축 거동 모델은 탄-소성 모델 혹은 변형율 경화 모델을 사용할 수 있도록 하였고, 인장 영역에서는 균열 발생시 까지 선형 탄성으로 가정하였다. 철근은 등가의 두께를 가지는 철근 층으로 근사되었으며 각 철근 층은 철근의 배치 방향으로만 저항하는 일축거동을 하며 응력-변형율 곡선을 두 개의 직선으로 이상화 하였다. 비선형 해석을 위해 하중 증분 기법과 반복계산 기법을 사용하였으며 시간 의존성 효과를 고려하기 위해 시간영역을 같은 간격이 아닐 수도 있는 여러 개의 구간으로 나누어 해석하였다. 몇 개의 계산 예를 제시하고 다른 연구자들의 결과와 비교하여 본 연구의 타당성을 검토하였다.

• 복식
• /
• 제57권7호
• /
• pp.137-152
• /
• 2007

The purpose of this study is to research on concept, consisting factors, and specialties of theme park' character costumes to understand better about character costumes as well as to establish fundamental research data. The characteristics of character costumes in the theme park are as follows. First, theme park' character costumes are personified so that visitors may feel friendly and have emotional communication with them. Specially, costume that anthropomorphize an animal(85.3%) and silhouette of lozenge style(86.8%) dominated the highest weight. Animal figures are walking upright and wearing human's clothes. They communicate with visitors using mime actions. Second, various types of body proportion is applied to highlight the characteristics of character costume. Most character costumes are applied with unrealistic body proportion. This unrealistic body proportion give abnormal image and looks funny. The important factor is size of their head. Especially, 3.5 body proportion(78.9%) is general. Third, simplification, exaggeration, shrinkage, and modification are other factors. Simplification is applied differently by parts. Pocket, collar details are simplified to clarify the character's image. More simplification can lead to ommission. For their head, peculiar parts look stand out but other parts are simplified to stress their characteristics. Exaggeration is used with shrinkage to give strong impression to visitors. Forms are broken intentionally and they are modified. They look impressive because they are not harmonized. It is unexpected image and induces humor and familiar feelings. Matter of stylization includes exaggeration, shrinkage, modification and movement of actors that have tangible factor of character costume.

• 한국주조공학회지
• /
• 제38권6호
• /
• pp.121-131
• /
• 2018

The effect of additives on the castability of the AC2BS aluminum alloy, which contains 35% recycled scrap, was investigated. For the wide utilization of the recycled scrap AC2BS aluminum alloy, the research results were compared to those with the AC2B virgin alloy, which is typical Al-Si-Cu alloy system. It was confirmed that the addition of Al-5%Ti-1%B increased the ${\alpha}$-Al nucleation temperature during solidification and decreased the grain size through cooling curve and microstructural observations of the recycled alloy. It was also found that an addition of Al-10%Sr decreased the eutectic Si growth temperature during the solidification process and modified the shape of the eutectic Si of the recycled alloy. The characteristics of fluidity, shrinkage and solidification crack strength were evaluated. For the AC2BS aluminum alloy containing 35% recycled scrap, both ${\alpha}$-Al grain refinement due to Ti-B and eutectic Si modifications due to Sr contributed to the improvement of the fluidity. The macro- shrinkage ratio increased with additions of both Al-10%Sr and Al-5%Ti-1%B and the micro-shrinkage ratio increased with the addition of Al-10%Sr but decreased with the addition of Al-5%Ti-1%B. The casting characteristics of TiB and Sr-treated AC2BS aluminum alloy containing 35% recycled scrap are similar to those of AC2B virgin alloy. The improvement of the solidification crack strength of the AC2BS aluminum alloy was possible by the reduction of the grain boundary the stress concentration through the enhancement by both ${\bullet}{\cdot}$-Al refinement and eutectic Si modification. More extensive use of the AC2BS aluminum alloy containing 35% recycled scrap can be expected in the future.

• Composites Research
• /
• 제34권6호
• /
• pp.426-433
• /
• 2021

탄소 섬유 강화 복합재료는 오토클레이브 공정 시 발생하는 잔류응력이 발생하고, 스프링 인, 뒤틀림과 같은 열변형으로 인해 치수 결함이 발생한다. 열변형의 주요원인은 제품의 형상, 수지의 화학 수축과 열팽창, 몰드의 재질과 표면 상태에 따른 몰드 효과 등 다양한 요인에 의해 발생한다. 본 연구는 열변형을 예측하기 위해 점탄성 모델 해석 기법을 평판 모델에 적용하여 열변형의 주요 원인인 수지의 화학 수축과 열팽창의 영향을 분석했고, 몰드 유무에 따른 3-D 점탄성 모델의 해석 기법을 검증했다. 검증된 3-D 점탄성 모델의 해석 기법을 이용하여 L-형상의 몰드 효과를 분석한 결과, 동일한 재질의 몰드를 사용했더라도 표면 상태에 따라 잔류 변형이 다르게 나타났다.

• Composites Research
• /
• 제22권6호
• /
• pp.45-51
• /
• 2009

치아의 와동에 수복된 치과용 복합레진을 광(LED) 조사를 통해 경화 수축시키면서 음향방출(acoustic emission, AE)법을 이용하여 와동 벽면과 복합레진 사이의 계면상태를 실시간 해석하였다. 복합레진의 중합 수축에 의해 AE 신호들이 검출되었는데 계면 접착 상태가 나쁜 경우, 경화 수축률이 큰 초기 1분 동안 많은 AE 사상들이 관측되었으며, 이들 AE는 주파수범위가 주로 100-200kHz인 돌발형이었다. 인간치아 재질의 시편에서 발생된 AE 사상수는 스테인리스 스틸 시편보다 적었으나, PMMA 시편보다는 많았고 접착제의 도포 상태가 양호할수록 검출되는 AE 사상수는 적었다. AE 파라미터의 특성은 복합레진과 링재 사이의 접착부에서 발생하는 인장형 균열전파 및 복합레진의 수축에 따른 링재의 압축거동과 관련되었으며, 음향방출법이 치아 수복물의 접착성에 대한 비파괴 검사법으로써 유효함을 알았다.

• Corrosion Science and Technology
• /
• 제11권6호
• /
• pp.275-279
• /
• 2012

Ni-W alloy deposits have lately attracted the interest as an alternative surface treatment method for hard chromium electrodeposits because of higher wear resistance, hardness at high temperature, and corrosion resistance. This study deals with influences of process variables, such as electodeposition current density, plating temperature and pH, on the internal stress of Ni-W nanocrystalline deposits. The internal stress was increased with increasing the applied current density. With increasing applied current density, the grain size of the deposit decreases and concentration of hydrogen in the deposit increases. The subsequent release of the hydrogen results in shrinkage of the deposit and the introduction of tensile stress in the deposit. Consequently, for layers deposited at high current density, cracking occurs readily owing to high tensile stress value. By increasing the temperature of the electrodeposition from $60^{\circ}C$ to $80^{\circ}C$, the internal stress was decreased. It seems that an increase in the number of active ions overcoming the activation energy at elevated temperature caused a decline in the concentration polarization and surface diffusion. It decreased the level of hydrogen absorption due to the lessened hydrogen evolution reaction. Therefore, the lower level of hydrogen absorption degenerated the hydride on the surface of the electrode, resulting in the reduction of the internal stress of the deposits. By increasing the pH of the electrodeposition from 5.6 to 6.8, the internal stress in the deposits were slightly decreased. It is considered that the decrease in internal stess of deposits was due to supply of W complex compound in cathode surface, and hydrogen ion resulted from decrease of activity.

• 폴리머
• /
• 제28권1호
• /
• pp.67-76
• /
• 2004

폴리(트리메틸렌 테레프탈레이트)/폴리(에틸렌 테레프탈레이트) (PTT/PET) 블렌드의 저온 연신 시, 연신 온도와 연신 비에 의한 PTT/PET 100/0, 90/10 및 80/20 블렌드의 열적 특성, 결정화도 및 배향 특성을 살펴보고 이에 따른 수축률과 기계적 특성 변화를 고찰하였다. 연신에 의한 배향과 응력에 의한 결정화 발현에 의해 PTT/PET 블렌드의 상대 결정화도와 유리 전이 온도가 증가되는 반면 냉결정화 온도 및 냉결정화 엔탈피는 감소하였다. PET 유리 전이 온도 이하 연신의 경우 PET의 첨가에 의해 결정화도는 감소되나 배향도 증가에 의하여 인장강도 및 탄성계수가 증가하였다. 수축률은 주사슬 배향에 따라 증가되나 연신에 의한 결정화도 증가에 의하여 최소화될 수 있음을 알 수 있었다.