• 콘크리트학회논문집
• /
• 제24권3호
• /
• pp.233-240
• /
• 2012

하이브리드 SHCC는 마이크로 섬유에 의한 마이크로 균열제어와 매크로 섬유에 의한 매크로 균열제어 성능이 뛰어나 다양한 분야에 적용가능성이 높은 재료로서 활발히 연구되고 있다. 그러나 SHCC는 부배합으로 자기수축에 의한 수축균열을 고려하여야 한다. 따라서 이 연구에서는 PE섬유와 강섬유가 함께 혼입된 팽창형 하이브리드 SHCC의 역학적 특성을 평가하고자 하였다. 하이브리드 SHCC의 역학적 특성을 평가하고자 W/B(45%, 30%, 20%)와 팽창재 대체유무(0%, 10%)를 변수로하였다. 시험은 수축, 압축, 직접인장 및 휨 시험을 수행하였다. 각 실험들을 통한 성능평가결과 10%의 팽창재를 대체한 W/B 30%의 하이브리드 SHCC에서 역학적 성능 개선이 가장 우수하였다.

• International Journal of Concrete Structures and Materials
• /
• 제3권2호
• /
• pp.91-95
• /
• 2009

Reclaimed asphalt pavement (RAP) is abundant substitute for natural aggregate in many areas. It is obtained by crushing of old road pavements in milling machine during rehabilitation and reconstruction process. In this study, reclaimed asphalt pavement mortars (RAPM) have been produced with different cement dosages and replacement ratios. The destructive and nondestructive tests have been conducted on specimens to determine physical and mechanical properties of RAPM. The free and restrained shrinkage tests on RAPM have been conducted to predict fractural behavior of mortars. The aim of the shrinkage tests was to delay crack formation and improve strain capacity of mortars before cracking. The results showed that RAPM exhibits lower elasticity modulus; however the tensile capacity was improved for deformation before cracking.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2018년도 춘계 학술논문 발표대회
• /
• pp.275-276
• /
• 2018

Ultra high performance concrete(UHPC) represents high early age autogenous shrinkage strain due to its low water-to-binder ratio(W/B) and high fineness admixture usage. It has been reported that fiber can control restrained tensile stress and crack. The purpose of the present study is, therefore, to investigate the autogenous shrinkage as well as mechanical properties including compressive strength, flexural strength and modulus of elasticity on the UHPC with fiber type and pre-mix of binder.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2013년도 춘계 학술논문 발표대회
• /
• pp.93-95
• /
• 2013

Recently, with the increase in the construction of ultra-high buildings and long-span structures, there is great demand for high-strength concrete which can reduce the structural weight and thickness of member sections. While developing high-strength concrete to meet performance requirements, certain issues at the design stage must also be considered. The issues include diseconomy from a great amount of per-unit cement, spalling failure by fire at ultra-high building, autogenous shrinkage caused by increased hydration activity of binder from use of a superplasticizer. Therefore, the purpose of this study is examined the strain characteristics of Fiber-reinforced-high-strength concrete(FRHSC), which differ from those of general concrete owing to autogenous shrinkage. Based on the experimental data, we proposed an autogenous shrinkage prediction model.

• Structural Engineering and Mechanics
• /
• 제89권4호
• /
• pp.335-347
• /
• 2024

This study pioneers the exploration of creep and shrinkage behavior in ambient-cured geopolymer concrete (GPC), a vital yet under-researched area in concrete technology. Focusing on the influence of sodium hydroxide (NaOH) solution concentration, the research utilizes low calcium fly ash (Class-F) and alkaline solutions to prepare two sets of GPC. The results show distinct patterns in compressive strength development and dry shrinkage reduction, with a 14 M NaOH solution demonstrating a 26.5% lower dry shrinkage than the 16 M solution. The creep behavior indicated a high initial strain within the first 7 days, significantly influenced by curing conditions and NaOH concentration. This study contributes to the existing knowledge by providing a deeper understanding of the time-dependent properties of GPC, which is crucial for optimizing its performance in structural applications.

• Steel and Composite Structures
• /
• 제39권1호
• /
• pp.21-33
• /
• 2021

This paper aims to improve the current state-of-the-art in long-term deflection prediction in steel-concrete composite beams. The efficiency of a time-dependent finite element model based on linear creep theory is verified with available experimental data. A parametric numerical study is then carried out, which focuses on the effects of concrete creep and/or shrinkage, ultimate shrinkage strain and reinforcing bars in the slab. The study shows that the long-term deformations in composite beams are dominated by concrete shrinkage and that a higher area of reinforcing bars leads to lower long-term deformations and steel stresses. The AISC model appears to overestimate the shrinkage-induced deflection. A modified ACI equation is proposed to quantify time-dependent deflections in composite beams. In particular, a modified reduction factor reflecting the influence of reinforcing bars and a coefficient reflecting the influence of ultimate shrinkage are introduced in the proposed equation. The long-term deflections predicted by this equation and the results of extensive numerical analyses are found to be in good agreement.

• 콘크리트학회논문집
• /
• 제23권5호
• /
• pp.581-590
• /
• 2011

초고성능 시멘트 복합체(ultra-high-performance cementitious conposites, UHPCC)는 우수한 압축강도와 연성을 나타내기 때문에 구조 부재 적용 시 단면을 상당히 감소시키고, 낮은 물-결합재비와 고분말 혼화 재료의 사용으로 높은 수축 변형률이 발생하게 되어 거푸집 및 보강근 등의 구속에 의한 수축 균열의 발생 가능성이 크다. 그러므로 이 연구에서는 UHPCC의 수축을 저감시키기 위한 방법으로 팽창재와 수축 저감제를 조합하여 혼입하고 자유수축과 구속 수축 거동을 평가하여 적합성 여부를 산정하였다. 실험 결과 팽창재와 수축 저감제를 조합하여 혼입한 경우에 약 40~44%의 자유수축 저감 효과를 보였으며, 잔류 인장응력은 약 35%와 47% 감소하였다. 지속적인 구속 하중에 의한 인장 크리프의 발생으로 탄성 수축 응력의 약 61%, 64%가 이완되는 것으로 나타났으며, 따라서 구속 수축 거동을 평가할 때에는 반드시 크리프 효과를 고려해야 한다고 판단되었다. 구속도는 0.78~0.85로 나타났으며 팽창재와 수축 저감제의 혼입에 의한 영향은 미미하였고 콘크리트 링의 두께가 클수록 감소하는 경향을 보였다. 또한, UHPCC의 인장 크리프 변형률을 측정하고 재령에 따라 변하는 구속 하중을 적용한 4-매개 변수 크리프 예측 모델과 비교하였다.

• Advances in concrete construction
• /
• 제9권3호
• /
• pp.289-299
• /
• 2020

To investigate the long-term behavior of eccentrically loaded RC columns, which are more realistic in practice than concentrically loaded RC columns, long-term eccentric loading tests were conducted for 10 RC columns. Test parameters included concrete compressive strength, reinforcement ratio, bar yield strength, eccentricity ratio, slenderness ratio, and loading pattern. Test results showed that the strain and curvature of the columns increased with time, and concrete forces were gradually transferred to longitudinal bars due to the creep and shrinkage of concrete. The long-term behavior of the columns varied with the test parameters, and long-term effects were more pronounced in the case of using the lower strength concrete, lower strength steel, lower bar ratio, fewer loading-step, higher eccentricity ratio, and higher slenderness ratio. However, in all the columns, no longitudinal bars were yielded under service loads at the final measuring day. Meanwhile, the numerical analysis modeling using the ultimate creep coefficient and ultimate shrinkage strain measured from cylinder tests gave quite good predictions for the behavior of the columns.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2009년도 춘계 학술대회 제21권1호
• /
• pp.309-310
• /
• 2009

본 연구는 잠실제2롯데월드 초고층 건축 프로젝트의 기둥축소량에 필요한 첫 번째 단계인 재료연구(일명 콘크리트 테스트 프로그램)의 일환으로 진행되고 있다. 현재까지 18개월간의 크리프 및 건조수축 측정결과가 확보되어 있으며 이에 대한 강도와 하중재령별로 분석을 실시하였고 추가적으로 회기분석을 실시하여 예측모델식에 따른 유도식을 제안하였다. 비교분석 시 사용된 예측 모델식은 ACI209R Model, Bazant-Baweja B3 Model, CEB MC99 Model, 및 GL2000 Model 등과 같이 네 가지 의 모델식을 활용하였다. 결과분석항목은 실무에서 활용되고 있는 전체 건조수축 변형과 단위 응력당 전체 크리프 변형(Compliance)에 대해서 실시하였다.

• 한국정밀공학회지
• /
• 제9권3호
• /
• pp.110-116
• /
• 1992

Electromgnetic joining of aluminum alloy tubes to high toughness polyurethane rubber cores is studied in order to estimate the joining strength and to analyze the effect of the process variables. The equation which can estimate the joining strength is proposed under considering the elastic recovery of the polyurethane core and the radial shrinkage of the core by pulling it axially. The obtained results are as follows : 1) The joining strength is mainly dependent on the magnitude of residual elastic strain of the polyurethane core. 2) The radial shrinkage (residual strain reduction) of the core during the axial pulling causes the joining strength to decrease severely. The equation for the reduced axial strength is proposed and it is found that the estimated values agree well with experimental results. 3) The magnitude of radial shrinkage could be reduced for the smaller value of ratio l/r. 4) The joining strength in metal/polymer joining increases as the friction coefficient increases. But its effect of friction coefficient is insignificant in comparison with the case of metal/metal joining.