• International Journal of Concrete Structures and Materials
• /
• 제18권2E호
• /
• pp.73-77
• /
• 2006

This paper shows a study of the efficiency of expansive additive and shrinkage reducing admixture in controlling restrained shrinkage cracking of high performance concrete at early age. Free autogenous shrinkage test of $100{\times}100{\times}400mm$ concrete specimens and simulated completely-restrained test with VRTM(variable restraint testing machine) were performed. Creep and autogenous shrinkage of high-performance concrete with and without expansive additive and shrinkage reducing admixture were investigated by experiments that provided data on free autogenous shrinkage and restrained shrinkage. The results showed that the addition of expansive additive and shrinkage reducing admixture effectively reduced autogenous shrinkage and tensile stress in the restrained conditions. Also, it was found that the shrinkage stress was relaxed by 90% in high-performance concrete with and without expansive additive and shrinkage reducing admixtures at early age.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1995년도 가을 학술발표회 논문집
• /
• pp.229-233
• /
• 1995

In this study we have the properties of drying shrinkage crack of hardened cement mortar using admixtures. The drying shrinkage cracking test process has been examined by the restrained drying shrinkage strain by restraining rate measuring properties of strain-with- restraint by JIS original proposal and keeps a flow value of mortar about 100$\pm$5%. The results show that the usage of shrinkage reducing agent 1.5% was effective on the control of drying shrinkage in OPC and CP by restraining rate 20% and strain-with-restraing 20~30 $\mu$, the usage of expansion agent 0.45% was effective by restraining rate 50~60% and strain-with-restraint 40~80$\mu$, and the effectiveness was increased with shrinkage reducing agent. Also. admixtures such as Flyash, CP and NC reduced restrained shrinkage and drying shrinkage cracking and more with shrinkage reducing agent

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.73-76
• /
• 2009

In ultra-high-strength concrete, chemical shrinkage is larger than drying shrinkage due to using a large amount of cement and admixtures, and this is a factor deteriorating the quality of structures. Thus, we need a new technology for minimizing the shrinkage strain of ultra-high-strength concrete. So, this study have prepared super-high-strength concrete with specified mixing design strength of over 100MPa and have evaluated a method of reducing chemical shrinkage by using expander and shrinkage-reducing agent. According to the results of this study, with regard to the change in length by chemical shrinkage, an expansion effect was observed until the age of seven days. The expansion effect was higher than previous research that used only expander or shrinkage reducing agent. In addition, ultra-high-strength concrete showed a shrinkage rate that slowed down with time, and the effect of the addition of expander material on compressive strength was insignificant. That is shown that required more database to be accumulated through experimental research for the shrinkage strain of members.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 1998년도 가을 학술발표논문집(II)
• /
• pp.368-373
• /
• 1998

Prepackaged system consists out of a dry mix which contains cement, sand, redispersible polymer powder and admixtures in the right proportions. The purpose of this study is to evaluate the quality of prepackaged-type polymer-modified mortar products using redispersible poly(ethylene-vinyl acetate)(EVA) powder. Polymer-modified mortars using the redispersible polymer powder with powdered with powdered shrinkage-reducing agent were prepared with cellulose fiber contents of 0, 0.5, 1.0% and shrinkage-reducing agent contents of 0, 4%, and tested for drying shrinkage, strength, adhesion in tension, water absorption. From the test results, the prepackaged-type polymer-modified mortar products with 4% of shrinkage-reducing agent content give good properties. and that their properties largely depends on the shrinkage-reducing agent content rather than the cellulose fiber contents.

• 한국건축시공학회지
• /
• 제5권3호
• /
• pp.101-107
• /
• 2005

This paper reports the contribution of Shrinkage reducing admixture(SRA) to the physical properties and drying shrinkage of concrete. Dosage of SRA is varied with. For the properties of fresh concrete, an increase in SRA dosage results in a decrease in fluidity and air content, while setting time is accelerated. For the properties of hardened concrete, the incorporation of mineral admixture leads to a decrease in compressive strength at early age, whereas after 28 days, the incorporation of fly ash(FA) and blast furnace slag(BS) has greater compressive strength than conventional concrete without admixture. The use of SRA results in a decrease in compressive strength. The incorporation of SRA with every $1\%$ increase causes the decrease of compressive strength by as much as $3\~6\%$. For drying shrinkage properties, the incorporation of FA and BS reduces drying shrinkage slightly. The use of SRA also decreases drying shrinkage. Every $1\%$ of increase in SRA dosage can reduce drying shrinkage by as much as $10\~15\%$

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2002년도 가을 학술발표회 논문집
• /
• pp.415-420
• /
• 2002

This study is intended to investigate the influence of mineral admixtures on the autogenous and drying shrinkage of high performance concrete. According to results, drying shrinkage increases with increase of fly ash content, and it does not show difference with replacement of blast furnace slag powder. It increases when incorporating silica fume or fly ash and silica fume together. The autogenous shrinkage shows increasing tendency with increase of silica fume and blast furnace slag powder content, and incorporating of silica fume or fly ash and silica fume together has effects on reducing autogenous shrinkage. Therefore, it is considered that application of both silica fume and fly ash can reduce the cracks caused by autogenous shrinkage, including enhancement in strength and placeability of high performance concrete.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2008년도 추계 학술발표회 제20권2호
• /
• pp.919-922
• /
• 2008

본 연구는 최근 국내 공동주택 지하주차장 등에 설치하는 지연 조인트에 적용할 콘크리트의 수축저감을 위한 연구로서, 팽창재와 3가지의 수축저감제를 단독 또는 병용하여 혼입할 경우 콘크리트의 물리적 특성 및 수축 특성에 대해 검토하기 위해 수행되었다. 실험 결과, 팽창재는 굳지않은 콘크리트의 유동성에 큰 영향을 미치지 않으나, 수축저감제의 경우콘크리트의 유동성을 증진시켜 고성능 감수제의 혼입량을 0.05$\sim$0.1% 정도 감소시킬 수 있다. 또한 팽창재를 혼입할 경우 경화 콘크리트의 압축, 인장 및 휨강도는 다소 증가하는 경향을 보였지만, 수축저감제를 단독 또는 팽창재와 병용 혼입한 경우에는 압축, 인장 및 휨강도가 다소 감소하는 경향을 보였다. 건조수축에 의한 길이변화율 측정결과, 수축저감제 중 SRA3을 2.0% 혼입한 경우 길이변화율 감소 효과가 가장 우수하였으며, 팽창재를 단독으로 사용하거나 팽창재와 SRA1, 2, 3을 병용 혼입한 경우에는 비슷한 감소 효과를 보였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제18권5호
• /
• pp.34-40
• /
• 2014

HPFRCC는 물-결합재비 (W/B)가 20%로 상당히 낮고 굵은 골재를 사용하지 않으며, 고분말 혼화재료를 혼입하기 때문에 자기수축이 상당히 크게 발생하여 구조물 적용 시 균열저감대책이 필요하다. 따라서 이 연구에서는 HPFRCC의 수축을 효율적으로 저감시키기 위한 방법으로 수축저감제와 팽창재의 사용을 검토하기 위하여 이들의 단독 또는 병행 혼입률에 따른 역학적 특성과 구속 수축특성을 평가하였다. 구속수축 실험 중에서 링-테스트 (Ring-test)를 통하여 HPFRCC에 사용되는 시멘트에 대하여 중량비로 수축저감제 1%와 팽창재를 7.5%를 병행 사용하였을 경우 압축강도와 인장강도가 크게 저하되지 않으면서도 수축을 가장 효율적으로 저감시킬 수 있는 최적 배합임을 도출하였고 수정된 건조수축 균열실험을 통하여 이를 검증하였다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2000년도 가을 학술발표회 논문집(II)
• /
• pp.921-924
• /
• 2000

The purpose of this paper is to investigate the effects of admixture such as AE water reducing agent and Flyash on properties of cement mortar for floor. As for the effects of AE water reducing agent kinds, fluidity and air content increase in order for melamine type, lignine type and naphtalene type. As Flyash contents increase, fluidity shows high, but air content shows decline tendency. compressive strength according to AE water reducing agent kinds increase in order for melamine type, lignine type and naphtalene type. As AE water reducing agent content increases, it shows to be decreased. As for the effects of Flyash, it retards at early age but at later age it gains high with increase of Flyash contents due to pozzanic reaction. Drying shrinkage shows to be docreased slightly with increase of AE water reducing agent.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권1호
• /
• pp.45-53
• /
• 2019

본 연구에서는 지오폴리머 결합재인 고로슬래그를 분쇄할 때 석고의 혼입 여부, 고로슬래그와 플라이애시의 혼합비율과 수축저감제 첨가 여부를 변수로 하여 실험하였다. 실험에서는 슬럼프플로우를 측정하여 작업성을 파악하였으며, 압축강도와 휨강도 및 건조수축을 측정하여 역학적 성능을 파악하였다. 석고를 혼입한 고로슬래그는 혼입하지 않은 고로슬래그에 비해 슬럼프플로우가 커지는 경향을 보였으며, 고로슬래그와 플라이애시의 혼합비율이 5:5인 경우가 혼합비율이 8:2인 경우보다 슬럼프플로우가 커지는 경향을 보여 석고와 플라이애시가 지오폴리머의 작업성을 높여주는 것으로 나타났다. 석고를 혼입하지 않은 고로슬래그를 사용한 지오폴리머는 석고를 혼입한 고로슬래그를 사용한 경우보다 압축강도와 휨강도가 모두 크게 나타났으며, 고로슬래그와 플라이애시의 혼합비율이 8:2인 경우가 혼합비율이 5:5인 경우보다 압축강도와 휨강도가 커지는 경향을 보였다. 석고를 혼입하지 않은 고로슬래그를 사용하고 플라이애시의 혼합비율을 높일수록 건조수축은 감소되었으며 수축저감제도 지오폴리머의 건조수축 저감에 효과적임을 알 수 있었다.