• 한국결정성장학회지
• /
• 제8권3호
• /
• pp.508-512
• /
• 1998

마이크로파(2.45GHz) 에너지를 이용한 소결법으로 $1100^{\circ}C$~$1300^{\circ}C$의 온도범위에서 반도체 세라믹스인 $Mn_3O_4{\cdot}Co_3O_4{\cdot}3NiO$ 조성의 NTC 서미스터를 소결하였으며, 그 전기적 특성을 조사하였다. 소결온도가 높아질수록 소결밀도가 높은 치밀한 소결체를 얻을 수 있었으며, 25~$85^{\circ}C$ 범위의 온도변화에 따른 전기저항변화 특성으로부터 구한 비저항 $B_{25^{\circ/85^{\circ}}$ 정수는 3100~3200K이었다. 마이크로파 하이브리드, 소결법으로 소결된 시편과 일반소결법으로 소결된 시편을 비교하면 소결특성과 전기적물성에서 비슷한 결과를 얻을 수 있었다. 마이크로파 에너지를 이용한 소결공정은 20분 안에 완료되는 짧은 시간의 급속소결법으로 공정 시간과 에너지를 크게 절감할 수 있었다.

• 한국의류학회지
• /
• 제15권2호
• /
• pp.199-209
• /
• 1991

In this paper, the fabrics for Korean folk clothes(KFC) undergoes repeated laundering under given condition. After this cyclic laundering was applied, the mechanical properties of the specimen were measured using KES-F system in order to evaluated the end-use performance of fabrics for KFC. And also, the crease recovery of fabrics for KFC were measured by shirley crease recovery tester. 78 different kinds of commercial silk fabrics and polyester fabrics for KFC were used for this study. The experimental results were analysed statistically to relate the mechanical properties and the crease recovery of fabrics for KFC. Furthermore, these changes in dimensional stability, mechanical properties and handle of fabrics for KFC were discussed in comparison with those values for silk fabrics and polyester fabrics. The results obtained are as follows. 1. Regardless of materials, remarkable increase are observed in shrinkage of the fabrics for KFC about repeated laundering, but dull increase are observed in shrinkage after 10 cycles of the repeated laundering. On the other hand, slack extend are observed in dimensions after 20 cycles of the repeated laundering. The shrinkage of fabrics for KFC after 10 cycles of the lundering showed that the silk fabrics are $1.74{\pm}0.33\%$ (warp direction) and $1.35{\pm}0.23\%$ (weft direction) and the polyester fabrics are $1.45{\pm}0.22\%$ (warp direction) and $1.25{\pm}0.23\%$ (weft direction). 2. Except for tensile property, these changes in mechanical properties of fabrics for KFC by laundering have $\pm$ 16 range of bending, shearing, compression, surface, thickness & weight as compared with before laundering. Particularly, the LT and RT about $1\~3$ cycles of the repeated laundering showed remarkable decrease. And SMD, WC, T & W of fabrics for KFC by the laundering were more increased than one for original fabrics. But B, 2HB, G, 2HG, 2HGS were decreased more than one for original fabrics. 3. 'Stiffness', 'Anti-drape', 'Crispness' and 'Scroop' hand values decrease and'Fullness & softness', 'Flexibility & softness' hand values increase with repeated laundering. 4. Remarkable decrease are observed in crease recoveries about $1\~5$ cycles of the repeated lundering, but slack decrease are observed in crease recoveries after 5 cycles of repeated laundering. The crease recovery of fabrics for KFC have negative(-) correlation with LT, RT, G, RC and MMD, This fact implies that the smaller these values, the larger the crease recovery. The crease recovery of fabrics for KFC has a high degree of correlation with the mechanical properties such as shearing, compression, surface property. And also, the crease recovery are expected by measuring the mechanical properties such as G, 2HG, 2HGS, RC, WC, LC, MIU, MMD and SMD, according to the obtained regression equation.

• 한국세라믹학회지
• /
• 제42권3호
• /
• pp.198-204
• /
• 2005

본 연구에서는 규불화염, 가용성 실리카, 방향족계 고분자 축합물 그리고 잠열특성을 지닌 질산염계 무기화합물로 구성된 규불화염계 수화열 저감제를 시멘트 모르타르의 수화열 및 건조수축에 미치는 영향을 조사하였다. 규불화염계 수화열 저감제의 첨가로 시멘트 모르타르의 단열상승온도 및 건조수축에 의한 길이변화가 저감되는 특성을 나타내었다. 또한, 규불화염계 수화열 저감제가 첨가된 판상형 시멘트 모르타르 시험체의 균열 패턴을 측정한 결과, 수화열 저감과 건조수축에 의해 길이변화가 저감되는 복합적 효과를 통해 시멘트 모르타르의 균열저감성이 개선되는 것을 확인하였다.

• 한국의류학회지
• /
• 제23권6호
• /
• pp.853-863
• /
• 1999

the change of physical properties (thickness, weight, air permeability) and mechanical properties(abrasion resistance breaking load and displacement) of samples were determined after heat exposure by a RPP tester. The effect of exposure time and heat flux intensity on the changes and the relationship between physical properties and mechanical properties were investigated. FR treated cotton Kevlar/PBI and Nomex with different structureal characteristics were chosen for specimens. The changes of physical properties and mechanical properties were calculated based on their initial values before heat exposure. The longer exposure time and the high heat flux intensity the more changes of those properties. Heat flux intensity was more effective on the changes, The showed to be affected by an interplay of shrinkage and pyrolysis products loss. The changes of thickness and abrasion resistance showed to be higher for plain weave fabric and those of air permeabiliyt and breaking load and displacement for twill weave fabric. While FR treated cotton which have high RPP value experienced serious and detrimental changes after heat exposure Kevlar/PBI which has low RPP value showed no high changes. In conclusion it could be confirmed that when total performance of a protective clothing is estimated retention capability of physical and mechanical properties after heat exposure as well as RPP value must be considered.

• Structural Engineering and Mechanics
• /
• 제46권1호
• /
• pp.53-73
• /
• 2013

Prediction of prestressed concrete girder integral abutment bridge (IAB) load effect requires understanding of the inherent uncertainties as it relates to thermal loading, time-dependent effects, bridge material properties and soil properties. In addition, complex inelastic and hysteretic behavior must be considered over an extended, 75-year bridge life. The present study establishes IAB displacement and internal force statistics based on available material property and soil property statistical models and Monte Carlo simulations. Numerical models within the simulation were developed to evaluate the 75-year bridge displacements and internal forces based on 2D numerical models that were calibrated against four field monitored IABs. The considered input uncertainties include both resistance and load variables. Material variables are: (1) concrete elastic modulus; (2) backfill stiffness; and (3) lateral pile soil stiffness. Thermal, time dependent, and soil loading variables are: (1) superstructure temperature fluctuation; (2) superstructure concrete thermal expansion coefficient; (3) superstructure temperature gradient; (4) concrete creep and shrinkage; (5) bridge construction timeline; and (6) backfill pressure on backwall and abutment. IAB displacement and internal force statistics were established for: (1) bridge axial force; (2) bridge bending moment; (3) pile lateral force; (4) pile moment; (5) pile head/abutment displacement; (6) compressive stress at the top fiber at the mid-span of the exterior span; and (7) tensile stress at the bottom fiber at the mid-span of the exterior span. These established IAB displacement and internal force statistics provide a basis for future reliability-based design criteria development.

• 한국의류학회지
• /
• 제40권2호
• /
• pp.305-314
• /
• 2016

This paper investigated the applicable possibility of PTT and wool staple fibers to the air vortex system as high quality yarns for a high emotional and comfort garment. It was found that the tactile hand of vortex yarn knitted fabrics was harsher than ring and compact yarns knitted fabrics. It was observed that formability and sewability of air vortex yarn knitted fabrics seemed worse than ring and compact yarns due to low tensile and compressional resilience and high bending and shear hysteresis of air vortex yarn knitted fabrics. It revealed that wicking and drying rates of air vortex yarn knitted fabric were better than ring and compact yarns; in addition, the heat keepability of vortex yarn knitted fabric was higher than ring and compact yarns due to low thermal conductivity and max heat flow rate ($Q_{max}$). Any difference of thermal shrinkage between air vortex and ring yarn knitted fabrics was not shown, but pilling characteristic of air vortex yarn knitted fabric was superior. However, it was shown that wicking, drying, thermal property and pilling characteristics of air vortex yarn knitted fabric were superior due to air vortex yarn structure with parallel fibers in the core part and periodical and fasciated twists in the sheath part of the yarns.

• 대한가정학회지
• /
• 제23권3호
• /
• pp.9-16
• /
• 1985

There are two standards for evaluation of fabric aesthetics, the feeling of fabric and the fabric sense of sight. Its drapalility with lustre is one of factors to decide the fabric sense of sight. This study was carried out to investigate the drape property property of fabrics. The fabric characteristics and the physisical properties of fabrics were tested. And the effect of the laundering on the drape properties was examined. RESULTS : 1. The drape coefficients of sampled fabrics were increasd as the thickness of fabrics were increased, excluding the fabric consisting of 60% polyester$\times$40% wool. 2. The drape coefficient of sampled fabrics were decreased as the cover faders of fabrics were increased, excluding the summer clothes and the fabrics of 100% wool. 3. The drape coefficients of fabrics other than sumer clothes were increased as the weight of fabrics were in creased. 4. Positive correlation was observed between the stiffness and the drape coefficient. 5. Negative correlation was observed between the fabric shrinkage and the drape coefficient. 6. The drape coefficient was decreased to a certain limit by laundering.But as the laundering was repeated up to certain number, the drape coefficient and the node number, a significant correlation was observed between the drape coefficient and the node shape.

• 한국구조물진단유지관리공학회 논문집
• /
• 제23권5호
• /
• pp.68-74
• /
• 2019

본 연구에서는 부착성능 향상 모르타르 숏크리트의 역학적 특성 및 내구성능에 대한 실험적 연구를 수행하였다. 모르타르 숏크리트는 도로공사 표준시방서에서 제시하고 있는 숏크리트 배합에서 굵은 골재를 100% 잔골재로 치환한 배합을 이용하였다. 바인더로는 OPC와 GGBFS, 무수석고를 이용하였으며, 폴리머는 바인더의 각각 1, 2% 치환하여 사용하였다. 실험을 통해 폴리머를 사용하는 경우 압축강도가 감소하나 부착강도는 Plain 대비 50% 정도 향상되는 것을 확인하였다. 또한 폴리머 혼입 시 건조수축이 감소하고 탄산화 저항성도 향상되었다. 반면 초기 수화 반응에 의한 발열량은 감소하였는데, 이로 인해 초기 압축 강도가 감소한 것으로 판단된다.

• Journal of the Korean Wood Science and Technology
• /
• 제52권1호
• /
• pp.87-100
• /
• 2024

Wood has different properties depending on the species or growth area. Therefore, in order to use wood efficiently, it is necessary to have a proper understanding of the characteristics of wood depending on the species and the appropriate use for them. In particular, in order to effectively use more than 1,000 species of woody plants in South Korea as wood, it is necessary to evaluate the characteristics of various Korean domestic woods and make a database of them. In this study, the anatomical properties (length and width of tracheid, cell wall thickness), physical properties (specific gravity and shrinkage), mechanical properties (bending strength, compressive strength, tensile strength, shear strength, hardness), and chemical composition (ash, extract, lignin, total sugar content) of Korean red pine which was grown in Pyeongchang-gun, Gangwon-do, South Korea were evaluated.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 춘계학술대회 논문집
• /
• pp.67-70
• /
• 2007

LTCC (Low Temperature Co-fired Ceramic) has been emerged as a promising technology in packaging industry. In this technology the lamination and the sintering process are very important because they change the permittivity of ceramics and the dimension of metal pattern which have influences on electric property. In this paper we studied on influence of the permittivity and the dimension change by lamination pressure and sintering temperature of LTCC process. As a results, permittivity increase along with increasing of lamination pressure and sintering temperature.