1 |
American Association of State Highway and Transportation Officials (AASHTO LRFD) (2010), AASHTO LRFD Bridge Design Specifications, Washington, DC.
|
2 |
Laman, J.A., Pugasap, K. and Kim, W. (2006), Field Monitoring of Integral Abutment Bridges, Report No. FHWA-PA-2006-006-510401-01, Pennsylvania Transportation Research Council.
|
3 |
Laman, J.A. and Kim, W. (2009), Monitoring of Integral Abutment Bridges and Design Criteria Development, Report No. FHWA-PA-2009-005-PSU002, Pennsylvania Transportation Research Council, Harrisburg, PA.
|
4 |
Mirza, S.A., Hatzinikolas, M. and MacGregor, J.G. (1979), "Statistical descriptions of the strength of concrete", J. Structural Div., 105(6), 1021-1037.
|
5 |
National Cooperative Highway Research Program (NCHRP 18-07), Tadros, M.K., Al-Omaishi, M., Seguirant, S.J. and Gallt, J.G. (1999), Prestress Losses in Pretensioned High-Strength Concrete Bridge Girders, Transportation Research Board, Washington, D.C., Rep 496.
|
6 |
National Climate Data Center (NCDC) (2006), Comparative Climate Data for the United States through 2006, National Oceanic and Atmospheric Administration. (http://www.noaa.gov/)
|
7 |
Nilson, A.H. (1991), Design of Concrete Structures, Eleventh Edition, McGraw-Hill Inc., New York.
|
8 |
Nowak, A.S. and Szerszen, M.M. (2003), "Calibration of design code for buildings (ACI 318): Part 1- statistical models for resistance", ACI Structureal Journal, 100(3), 377-382.
|
9 |
Nowak, A.S., Yamani, A.S. and Tabsh, S.W. (1994), "Probabilistic models for resistance of concrete bridge girders", ACI Structural Journal, 91(3), 269-276.
|
10 |
Oesterle, R.G., Refai, T.M., Volz, J.S., Scanlon, A. and Weiss, W.J. (1998), Jointless and Integral Abutment Bridges Analytical Research and Proposed Design Procedures, Construction Technology Laboratories, Inc., Draft Final Report to Federal Highway Administration, Washington, D.C.
|
11 |
Ott, R.L. and Longnecker, M. (2001), An Introduction to Statistical Methods and Data Analysis, 5th Edition, Duxbury, Thomson Learning, Inc., Pacific Grove, CA.
|
12 |
Pugasap, K., Kim, W. and Laman, J.A. (2009), "Long-term response prediction of integral abutment bridges", J. Bridge Eng., 14(2), 129-139.
|
13 |
The Pennsylvania State Climatologist (PSC), http://pasc.met.psu.edu/PA_Climatologist.
|
14 |
American Association of State Highway and Transportation Officials (AASHTO Guide) (1989), AASHTO Guide Specifications Thermal Effects in Concrete Bridge Superstructures, Washington, DC.
|
15 |
American Concrete Institute Committee 209 (ACI 209) (1994), Prediction of Creep, Shrinkage, and Temperature Effects in Concrete Structures, ACI Manual of Concrete Practice Part I, American Concrete Institute, Farmington Hills, MI.
|
16 |
America Concrete Institute Committee 363 (ACI 363) (1998), Guide to Quality Control and Testing of High-Strength Concrete, American Concrete Institute, Farmington Hills, MI.
|
17 |
American Society of Heating, Refrigeration, and Air-Conditioning Engineers (ASHRAE) (1993), Fundamentals Handbook, American Society of Heating, Refrigeration, and Air-Conditioning Engineers, New York, NY.
|
18 |
Ayyub, B.M., and McCuen, R.H. (2003), Probability, Statistics, and Reliability for Engineers and Scientists, Chapman and Hall/CRC Press, Boca Raton, FL.
|
19 |
Baecher, G.B. and Christian, J.T. (2003), Reliability and Statistics in Geotechnical Engineering, John Wiley & Sons, ISBN: 0-471-49833-5.
|
20 |
Bazant, Z.P. and Baweja, S. (1995), "Justification and Refinement of Model B3 for concrete creep and shrinkage models-1. Statistics and sensitivity", Materials and Structures, 28(181), 415-430.
DOI
|
21 |
Bazant, Z.P. and Baweja, S. (2000), "Creep and shrinkage prediction model for analysis and design of concrete structures: model B3-short form", Adam Neville Symposium: Creep and Shrinkage: Structural Design Effects, American Concrete Institute, 85-100.
|
22 |
Comite Euro-Internationale du Beton (CEB) (1990), CEB-FIP Model Code for Concrete Structures, Buletin D'Information No. 213/214, Lausanne, Switzerland.
|
23 |
Das, B.M. (1999), Principles of Foundation Engineering, Brooks/Cole Publishing Company, 4th Ed., ISBN: 0-534-95403-0
|
24 |
Das, B.M. (2002), Soil Mechanics Laboratory Manual, 6th Ed., Oxford University Press.
|
25 |
Duncan, J.M. (2000), "Factors of safety and reliability in geotechnical engineering", J Geotechnical and Geoenvironmental Engineering, 126(4), 307-316.
DOI
ScienceOn
|
26 |
Yang, I. (2005), "Uncertainty and updating of long-term prediction of prestress forces in PSC box girder bridges", Computers and Structures, 83, 2137-2149.
DOI
ScienceOn
|
27 |
Russell, H.G., Miller, R.A., Ozyildirim, H.C. and Tadros, M.K. (2006), Compilation and Evaluation of Results from High-Performance Concrete Bridge Porjects, Volume I: Final Report, FHWA-HRT-05-056. U.S. Department of Transportation, Federal Highway Adminstration, McLean, VA.
|
28 |
Stewart, M.G. (1997), "Time-dependent reliability of existing RC structures", J. Struct. Eng., 123(7), 896- 902.
DOI
ScienceOn
|
29 |
Tanesi, J., Kutay, M.E., Abbas, A. and Meininger, R. (2007), "Effect of CTE variability on concrete pavement performance as predicted using the mechanistic-empirical pavement design guide", Proceedings: TRB 86th Annual Meeting, Transportation Research Board, Washington D.C.
|
30 |
Emanuel, J.H. and Hulsey, J.L. (1997), "Prediction of the thermal coefficient of expansion of concrete", J American Concrete Institute, 74(4), 149-155.
|
31 |
Galambos T. V., Ellingwood B., MacGreger J. G., and Cornell C. A. (1982), "Probability Based Load Criteria: Assessment of Current Design Practice", J Structural Engineering, 108(ST5);959-977.
|
32 |
Greimann, L.F., Yang, P. and Wolde-Tinsae, A.M. (1986), "Nonlinear analysis of integral abutment bridges", J. Structural Engineering, 112(10), 2263-2280.
DOI
ScienceOn
|
33 |
Harr, M.E. (1987), Reliability-based design in civil engineering, McGraw-Hill, New York.
|
34 |
Kada, H., Lachemi, M., Petrov, N., Bonneau, O. and Aϊtcin, P.C. (2002), "Determination of the coefficient of thermal expansion of high performance concrete from initial setting", Materials and Structures, 35, 35- 41.
DOI
|
35 |
Kim, W. (2008), "Simplified nonlinear numerical analysis method for integral abutment bridges", Proceedings of the 2008 International Bridge Conference, Pittsburgh, PA, IBC-08-43, 290-298.
|
36 |
Kim, W. and Laman, J.A. (2010a), "Numerical analysis method for long-term behavior of integral abutment bridges", Eng. Struct., 32(8), 2247-2257.
DOI
ScienceOn
|
37 |
Kim, W. and Laman, J.A. (2010b), "Integral abutment bridge response under thermal loading", Eng. Struct., 32(6), 1495-1508.
DOI
ScienceOn
|
38 |
Kim, W. and Laman, J.A. (2012), "7-year field monitoring of four integral abutment bridges", J. of Performance of Constructed Facilities, 26(1), 54-64.
DOI
|
39 |
Kulhawy, F.H. (1992), "On the evaluation of soil properties", ASCE Geotech. Special Publication, 31, 95- 115.
|
40 |
Lacasse, S. and Nadim, F. (1997), "Uncertainties in characterizing soil properties", Norwegian Geotechnical Institute, Oslo, Norway, 201, 49-75.
|
41 |
Laman, J.A., Linzell, D.G., Leighty, C.A. and Fennema, J.L. (2003), Methodology to Predict Movement and Stresses in Integral Abutment Bridges, Report No. FHWA-PA-2002-039-97-04(80), Pennsylvania Transportation Research Council.
|