• Journal of the Korean Orthopaedic Association
• /
• v.56 no.6
• /
• pp.498-503
• /
• 2021

Purpose: The aim of this study were to find ideal entry point of straight antegrade humeral intramedullary nail (SAHN) for the treatment of proximal humerus fracture in Korean and to analyze anatomical conformity using computed tomography. Materials and Methods: From May 2014 to October 2016, the study was conducted retrospectively on 74 Korean patients who had taken computed tomography on both normal and affected shoulder joint as result of shoulder injury. The mean age of the patients was 64.5 years (range, 22-95 years). Radiologic evaluation was done using multiplanar reconstruction technique of the computer tomography on normal proximal humerus. We located ideal entry point of SAHN as the point where humerus intramedullary center axis and humeral head meet. Distance between the entry point and local anatomical landmark was measured. We defined the critical distance as the distance between entry point and the most medial point of the supraspinatus attachment site. For adequate fixation and avoidance of injury to rotator cuff, critical distance should be over 8 mm according to Euler, and we defined the critical type when it is less than 8 mm. Critical distance, sex, age, height, body weight, body mass index was evaluated for the statistical significance. Results: The ideal entry point was as follows: the mean anteroposterior distance, the sagittal distance to the lateral margin of bicipital groove, was 11.5 mm and the mean mediolateral distance, the coronal distance to the lateral margin of grater tuberosity, was 20.5 mm. The mean critical distance, distance from the entry point to the just medial to insertion of the supraspinatus tendon, was 8.0 mm. Critical type with critical distance less than 8 mm was found in 41 in 74 patients (55.4%). Conclusion: The ideal entry point of SAHN in Korean was located on 11.5 mm posteriorly from the lateral margin of bicipital groove and 20.5 mm medially from lateral margin of greater tuberosity. More than half of the cases were critical type. Since critical type can possibly cause rotate cuff injury during nail insertion on entry point, surgeon should consider anatomical variance before choosing surgical option.

• Journal of Korea Entertainment Industry Association
• /
• v.13 no.4
• /
• pp.369-375
• /
• 2019

This study looked at the effects of teratainment taping and footpad exercise on the improvement of flat foot in a university student. We divided it into flexible flat foot taping group(n=13), flexible flat foot exercise group(n=14), rigid flat foot taping group(n=12), rigid flat foot exercise group(n=13) through a navicular drop test. After one hour's application of teratainment taping and footpad exercise, the height change of navicular, balancing ability and postural stability were evaluated. Change in the height of the navicular was measured before and after intervention, and the balancing ability was measured timed up & go test, and the postural stability ability was evaluated for stability limits in shoulder-width double leg stance, narrow base double leg stance, tandem stance. According to result, there was a statistically significant difference in the left and right foot of the flexible tapping group, right foot of the flexible tapping group, right foot of the rigid tapping group in the change in the height of the navicular in comparison pre- and post- intervention(p<0.5). There were no statistically significant differences in pre- and post- intervention comparisons intragroup and intergroup in balancing ability. There was a statistically significant difference in flexible flat foot exercise group and rigid flat foot taping group in tandem stance in comparison pre- and postintervention in the postural stability(p<0.5). And there was a statistically significant difference in tendem stance of the flexible flat foot exercise group compared to the rigid flat foot exercise group(p<0.5). The results of this study show that teratainment taping and footpad exercise have a significant effect on the improvement of flat foot in adults. Therefore, it is recommended to apply teratainment taping and footpad exercise to improve flat foot.

• MISULJARYO - National Museum of Korea Art Journal
• /
• v.96
• /
• pp.209-223
• /
• 2019

The Iron Seated Buddha sculpture in the National Museum of Korea had long sat unregistered in storage at the museum. However, a new accession number "bon9976" has recently been assigned to it. This sculpture was excavated from the neighborhood of Heungnyongsa Temple in Baekun-ri, Yidong-myeon, Pocheon-gun, Gyeonggi-do Province together with another Iron Seated Buddha sculpture(bon9975) called "Iron Buddha from Pocheon." A comparison and examination of Gelatin Dry Plate and official documents from the Joseon Government-General Museum during the Japanese occupation period have revealed that these two Iron Buddha sculptures were transferred to the Museum of the Government-General of Korea on December 17, 1925. The Iron Seated Buddha sculpture(bon9976) has a height of 105 centimeters, width at the shoulders of 57 centimeters, and width at the knee of 77 centimeters. The Buddha is wearing a robe with rippling drapery folds and the right shoulder exposed. He is seated in the position called gilsangjwa(the seat of good fortune) in which the left foot is placed over the right thigh. The features of the Buddha's oval face are prominently sculpted. The voluminous cheeks, eye sockets in a large oval shape, slanted eyes, short nose, and plump lips can also be found in other ninth-century Iron Seated Buddha sculptures at Silsangsa Temple in Namwon, Jeollanam-do Province, Hancheonsa Temple in Yecheon, Gyeongsangbuk-do Province, and Samhwasa Temple in Donghae-si, Gangwon-do Province. Moreover, its crossed legs, robe exposing the right shoulder, and rippling drapery folds suggest that this sculpture might have been modeled after the main Buddha sculpture of the Seokguram Grotto from the eighth century. The identity of this Iron Seated Buddha can be determined using the Gelatin Dry Plate(M442-2, M442-7). In them, the Buddha has its right palm facing upwards and holds a medicine jar on its left palm. Until now, the Iron Seated Bhaiṣajyagura(Medicine) Buddha(bon1970) excavated from Wonju has been considered the sole example of an iron Medicine Buddha sculpture. However, this newly registered Iron Seated Buddha turns out to be a Medicine Buddha holding a medicine jar. Furthermore, it serves as valuable material since traces of gilding and lacquering clearly remain on its surface. This Iron Seated Buddha sculpture (bon9976) is presumed to have been produced around the ninth century under the influence of Esoteric Buddhism by the Monk Doseon(827~898), a disciple of the Monk Hyecheol, to protect the temple and help the country overcome geographical shortcomings. According to the records stored at Naewonsa Temple(later Heungnyongsa Temple), Doseon selected three significant sites, including Baegunsan Mountain, built "protector" temples, created the Bhaisajyagura Buddha triad, and enshrined them at the temples. Moreover, the inscription on the stele on the restoration of Seonamsa Temple states that Doseon constructed temples and produced iron Buddha sculptures to help the country surmount certain geographical shortcomings. Heungnyongsa Temple is located in Dopyeong-ri, Yidong-myeon, Pocheon-si, Gyeonggi-do Province. This region appears to have been related to rituals directed to the Medicine Buddha since Yaksa Temple(literally, "the temple of medicine") was built here during the Goryeo Dynasty, and the Yaksa Temple site with its three-story stone pagoda and Yaksadong Valley still exist in Dopyeong-ri.

• Journal of the Ergonomics Society of Korea
• /
• v.36 no.5
• /
• pp.589-599
• /
• 2017

Objective: The objective of this study was to measure the upper-limb motions and postures of grapes-harvesting tasks using electrical goniometers and analyze the upper-limb motions in a kinematic way to assess the risk of musculoskeletal disorders. Background: Grapes farmers are exposed to various risk factors of musculoskeletal disorders (MSDs) such as repetitive upper-limb motions, non-neutral postures, and manual handling of heavy items. The farmers have to use scissors repetitively while harvesting grapes with their being arms elevated over the shoulder height, which presumed to increase the physical workload. It has been reported that the grapes farmers feel the harvesting task as the one of the hardest work in cultivating grapes. We tried measure the wrist and elbow angles while the farmers were carrying out harvesting tasks to understand how much workload the work impose on the farmers, which can be helpful in making interventions of preventing musculosksletal disorders among grapes farmers. Method: We measured joint angles at the right wrist and elbow with a wireless measuring system with two electrical goniometers from five grape farmers. The grapes-harvesting task was classified into 6 different subtasks: 1) searching, 2) picking, 3) cleaning, 4) carrying, 6) storing, and 7) miscellaneous tasks. The subtasks were compared by mean angles, 10%, 50%, and 90% APDF values of wrist flexion/extension, ulnar/radial deviation, and elbow flexion. Results: The Kruskal-Wallis tests showed that the 10th percentiles of APDF of ulnar/radial deviation and flexion/extension of the wrist significantly differs among subtasks (p<0.05). It was found that the farmers assumed more deviated wrist postures in the ulnar direction when they picking and adjusting the grapes. The use of scissors seemed to force the farmers to severely bend their wrist in the directions of ulnar deviation and flexion. The grapes-harvesting task showed similar wrist postures and motion with poultry deboning and milking tasks. Conclusion: The grapes harvesting tasks make the farmers take ulnar deviated and extended postures in the wrist. The use of scissors makes them take more severely deviated postures in the wrist. Safety guidelines including use of ergonomic scissors can be provided to the farmers to improve their work conditions. Application: The results of this study can be used as a basic data for the development of safety guidelines for agricultural work.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.33 no.7
• /
• pp.1109-1120
• /
• 2009

This study develops a fitted torso type basic pattern for men by utilizing 3D body scan data. Recent fashion trends are reflected in the development of the pattern. The subjects were 15 men in their 20's, who wear size 95 (M size). Body scan data was obtained through a 3D whole body scanner (WB4, Cyberware, USA), and a body surface development figure for developing male fitted torso type basic pattern was attained through the use of Rapid Form 2006 as well as Auto CAD 2006 programs. The results are as follows: A body surface development figure through body surface segment method showed high exactitude in an error range of 100$\pm$1%. In addition, it occurred in an error range of 100:1:3% because of the hard scanning conditions in the incline of the shoulder and armpit areas. However, the body surface development figure as well as the direct measurement results can be used as basic data for the given patternmaking since the error range falls into 100$\pm$3%. Dart amounts obtained from the average cross section were center back 2.2cm (24.3%), back armpit point 3.8cm (41.8%), front armpit point 3.0cm (33.9%). As shown the jacket pattern, the biggest dart amount was portioned out at the back armpit point. The drafting equations for the development pattern acquired are as follows; Full width=C/2+5cm, back length=height/4-1cm, armhole depth=(C/10+12cm)+3cm, back width=2C/10+2cm, front width=2C/10. The development pattern was a fitted torso basic pattern that was composed of 3 pieces, so it would be very useful in developing shirt or jacket patterns. According to the results of the evaluation of the developed pattern appearance, it obtained higher scores of over 3.5 points in almost items, meaning that the developed pattern is appropriate for a male fitted torso type basic pattern. It suggests a possibility of patternmaking from a body surface development figure in 2-D to prototype.

• Journal of Korean Society of Transportation
• /
• v.34 no.5
• /
• pp.409-420
• /
• 2016

Korea is expected to enter 'Super Aged Society' in 2026. However, as walking is the very basic human right of mobility, securing safe and convenient moving of elderly people comprising the majority of transportation vulnerable is thought to be the most basic welfare, which can be easily neglected. From this perspectives, this study provides the walking characteristics of elderly people to be used in design of pedestrian facilities. The analysis of the measurements using Motion Analysis Systems shows that all walking factors of elderly people is 75% level of the younger group. Elderly group shows slower movement, reduced shoulder movement and increased ankle movement compared to the others. Also, foots are risen less and ground repulsive force is increased. Cluster analysis shows that the group of the elderly shows high variability inside the group, and 2 or 3 clusters can be formed with factors of Walking, Balance and Muscles. These walking characteristics can be used in designing pedestrian road, slope and step height of roadway facilities.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.15 no.6
• /
• pp.585-597
• /
• 2013

In this study, in order to evaluate stability of the room-and-pillar underground structure, a series of preliminary numerical analyses were performed. Design concept and procedure of an underground structure for obtaining a space are proposed, which should be different from structural design for the room-and-pillar in mine. With assumed material properties, a series of numerical analyses were performed by varying size ratios of room and pillar and then the failure modes and location at yielding initiation were investigated. From the results, relationship between the ratio of pillar width to the roof span (w/s) and overburden pressure at failure initiation shows a relatively linear relation, and the effect of w/s on structural stability is much more critical than the ratio of pillar width and height (w/H) which is a crucial parameter in design of the room-and-pillar mining. It means that roof tensile failure and shear failure at shoulder and pillar are necessary to be considered together for confirming overall structural stability of the room-and-pillar structure, rather than considering the pillar stability only in mining. Failure modes and location at failure initiation were varied with respect to the ratio of room and pillar widths. Therefore, it is necessary to simultaneously consider stability of both roof span and pillar for design of underground structure by the room-and-pillar method.

• Korean Journal of Applied Biomechanics
• /
• v.14 no.2
• /
• pp.69-83
• /
• 2004

The purpose of this study is searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system. Moreover, It is also analysis the repeating the establishment of exercise purpose and studying for the effect of the field adaptation. The subject of this study was five male weight lifting players who have been engaged in Korean Delegation Team. The institution of exercise target was made through two times qualitative analysis and the result of studying for the effect of the field adaptation was produced before offering feedback. Moreover, two time analysis added after offering feedback. All analysis was based on 2-D visual analysis. The results of this study are as follows: 1. Maximal barbell moving speed in starting phase was decreased after offering feedback. This result implies advancement of technical skills after offering feedback. 2. From starting posture to 앉아받기, forward and backward moving distance of hip joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 3. In terms of pull phase, forward and backward moving distance of hip and shoulder joint was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 4. In terms of pull phase, the difference of horizontal value of coordinates was decreased after offering feedback in all subjects. This result represents advancement of technical skills after offering feedback. 5. In terms of pull phase, the motion range of hip joint was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them were not variable or narrow decreasing. This result represents that feedback system could not brought tremendous effects. 6. From apex point of barbell to 앉아받기, the difference of barbell height was decreased after offering feedback in three of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them weren't variable or narrow increasing. This result represents that feedback system could not brought tremendous effects. 7. In terms of last-pull phase, the angular velocity of knee joint was increased after offering feedback in four of five subjects and this represents advancement of technical skills after offering feedback. However, the rest of them, only one subject, decreased. This result represents that feedback system could not brought tremendous effects. 8. In terms of last-pull, the conversional tendency of maximal extension to flextion came out all but simultaneously without offering feedback in four of five subjects. This is well-performed technique. Only one subject, however, could not use power effectively because the fact that his maximal extension came out in serial, from ankle to knee and waist means dispersion of power. In addition to, after offering feedback, only one subject made increasing the maximal extension of knee in last-pull and this result represents advancement of skills after offering feedback. However, the rest of them could not make meaningful development after offering feedback. 9. It might be assumed that searching for technical merits and demerits of each weight lifting player through qualitative motion analysis system could improve player's skill.

• The Journal of Korean Academy of Prosthodontics
• /
• v.39 no.6
• /
• pp.599-610
• /
• 2001

Due to an increasing interest in esthetics and concerns about toxic and allergic reactions to certain alloys, patients and dentists have been looking for metal-free tooth-colored restorations. Recent improvement in technology of new all-ceramic materials and composite materials has broadened the options for esthetic single crown restorations. The aim of this investigation was to study the fracture strength of the metal-free posterior single crowns fabricated using two recently introduced systems, Empress 2 ceramic and Targis-Vectris. Forty premolar-shaped stainless steel dies with the 1mm-wide circumferential shoulder were prepared. Ten cylindrical crowns having a diameter of 8.0mm and total height of 7.5mm were fabricated for each crown system respectively(PFM, Empress staining technique, Empress 2 layering technique, and Targis- Vectris). The crowns were filled with cement and placed on the stainless steel dies with firm finger pressure. The crowns were then stored in distilled water at room temperature for 24 hours before testing. The crowns were tested for fracture strength in an Instron universal testing machine (Instron 6022). With a crosshead speed of 1mm/min the center of the occlusal surface of the crown was loaded using a 4-mm-diameter stainless steel ball until fracture occurred. The fracture surfaces of the crowns were gold coated and examined using scanning electron microscopy(Jeol JSM-840 Joel Ltd., Akishima, Tokyo, Japan). Within the parameters of this study the following conclusions were drawn: 1. The mean fracture strength for PFM crowns was 5829(${\pm}906$)N; for Empress staining technique the fracture strength was 1697(${\pm}604$)N; for Empress 2 Layering technique the fracture strength was 1781N(${\pm}400$)N, and the fracture strength for Targis- Vectris was 3093(${\pm}475$)N. 2. The fracture strength of the PFM crowns was significantly higher than that of the Empress 2 and the Targis-Vectris crowns (P<0.05). 3. The fracture strength of the Targis-Vectris crowns was significantly higher than that of the Empress 2 crowns (P<0.05). 4. No statistical difference was found when Empress staining technique was compared with Empress 2 layering technique. 5. The SEM image of fracture surface of Empress 2 crown showed a very dense microstructure of the lithium disilicate crystals and the SEM image of fracture surface of Targis-Vectris crown showed indentations of Vectris and some fibers tom off from Vectris.

• Journal of the Korean Society of Costume
• /
• v.64 no.3
• /
• pp.77-92
• /
• 2014

The purpose of this research is to examine the expression methods of Haute Couture designers' high value-added jacket designs, In order to achieve this, the positions and sizes of the design component items of tailored jackets designed by Haute Couture designers from the 1940s to the 1970s were analyzed. The results of the analysis are as follows. First, the silhouette changed while leading the contemporaneous fashions, and such changes could be confirmed by the width and length of the jacket's shoulder, chest, waist, and hem that determine the silhouette. Particularly, the length of the chest changed which signifies that the depth of the armhole was playing an important role in the production of high value-added jackets in relation to the sleeves and the fit of jackets. Second, the position and the size of the dart are the components that can express the fit of a jacket and the designer's creativity, The starting point position of the dart and the position passing by waist, and the position of the end of the dart were placed in the position beyond B.P. depending on the designer's creativity and techniques, deriving the changes of the silhouette and creating high value-added jackets. Third, the tailored collar, which was a three-dimensional component made up of the upper collar, gorge line, lapel, and break line, was an important component that could express high value-added jackets. Changes in the width and the height of the break line position of the sides of the neck were represented as changes in the neck size of the collar, and changes in the vertex locations of the upper collar corner-point, the gorge line (the corner-point of the lapel and V zone) were also represented as diverse tailored collar designs. And the differences in the width and the length of each component of the collar were related to each other and represented as changes in the slope and angle of the collar outline. Fourth, the changes in sleeve designs of the jacket were in such items as the width of the sleeve opening, the width of the sleeve hem, and the length of the sleeve, and were represented as diverse sleeve designs such as widened sleeve opening types, and straight line types.