• Structural Engineering and Mechanics
• /
• 제33권5호
• /
• pp.543-560
• /
• 2009

The rotating Rayleigh-Timoshenko beam element based on B-spline wavelet on the interval (BSWI) is constructed to discrete short shaft and stiffness disc. The crack is represented by non-dimensional linear spring using linear fracture mechanics theory. The wavelet-based finite element model of rotor system is constructed to solve the first three natural frequencies functions of normalized crack location and depth. The normalized crack location, normalized crack depth and the first three natural frequencies are then employed as the training samples to achieve the neural networks for crack diagnosis. Measured natural frequencies are served as inputs of the trained neural networks and the normalized crack location and depth can be identified. The experimental results of fatigue crack in short shaft is also given.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2009년도 세계 도시지반공학 심포지엄
• /
• pp.1522-1529
• /
• 2009

When a shaft is excavated in Korea, the mechanized method such as RBM(Raise Boring Machine) or RC(Raise Climber) is used independently of depth. But usually, the mechanized method is useful for the deep depth. On the contrary, when the depth of shaft is short, the cost of excavation increase. So in the case of shaft constructon less than 100m, we need to consider more suitable method of shaft construction such as Stage-cut which is one of blasting methods. Stage-Cut is widely used in the field of shaft construction in Japan as a tool of rock excavation. The main purpose of this study is to provide technical guidance for design and construction of shafts in rock, using Stage-cut method which is suitable for 20m~80m depth shaft. In this study, Blasting tests was performed in field, according to rock classification. Finally, the stage-cut method which is suitable for the geology of Korea was developed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문집
• /
• pp.428-433
• /
• 2002

There have been many studies to visualize the vibration and noise of rotary compressor. Most of these studies assumed that the signal is stationary and the time-averaged signal is used for visualization. However, the noise and vibration signals generated during one cycle of crank shaft vary continuously. In this paper, the noise and vibration of rotary compressor which vary continuously are visualized by short time fourier transform method. The location of source and the transfer path of vibration and noise at arbitrary frequencies, which can not be visualized by averaged signal, can be visualized clearly.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 추계학술대회논문초록집
• /
• pp.346.1-346
• /
• 2002

There have been many studies to visualize the vibration and noise of rotary compressor. Most of these studies assumed that the signal is stationary and the time-averaged signal is used for visualization. However, the noise and vibration signals generated during one cycle of crank shaft vary continuously. In this paper, the noise and vibration of rotary compressor which vary continuously are visualized by short time fourier transform method. (omitted)

• 한국정밀공학회지
• /
• 제33권4호
• /
• pp.257-264
• /
• 2016

Solid state joining techniques are increasingly applied in a wide range of industrial applications. Friction welding is a solid state welding technique that is used to join similar or dissimilar materials. In this study, friction welding was applied to rotor shaft composed of a disk and a shaft. The disk and shaft were manufactured by hot forging and rolling, respectively. The aim of the study was to predict the structural characteristics during hot forging and friction welding process for rotor shaft of turbo charger. The structural characteristics were determined by heat input and heat affected zone (HAZ) during a short cycle time. Thus, transient FE analysis for hot forging and friction welding was based on heat transfer. The results were used to predict structural characteristics during hot forging and friction welding processes. The prototype of rotor shaft was manufactured by the result-based process parameters.

• Smart Structures and Systems
• /
• 제30권2호
• /
• pp.209-219
• /
• 2022

The determination for bearing capacity of precast nodular piles is conventionally time-consuming and high-cost by using numerous experiments and empirical methods. This study proposes an intelligent method to evaluate the bearing capacity and shaft resistance of the nodular piles with high efficiency based on long short-term memory (LSTM) approach. A series of field tests are first designed to measure the axial force, shaft resistance and displacement of the combined nodular piles under different loadings, in comparison with the single pre-stressed high-strength concrete piles. The test results confirm that the combined nodular piles could provide larger ultimate bearing capacity (more than 100%) than the single pre-stressed high-strength concrete piles. Both the LSTM-based method and empirical methods are used to calculate the shift resistance of the combined nodular piles. The results show that the LSTM-based method has a high-precision estimation on shaft resistance, not only for the ultimate load but also for the working load.

• 한국임상수의학회지
• /
• 제34권3호
• /
• pp.200-203
• /
• 2017

The objective of this study was to evaluate the effectiveness of the minimally invasive plate osteosynthesis (MIPO) method for treatment of tibial shaft fractures in dogs by comparing MIPO radiographic and fracture healing time results with those from the popular open reduction and internal fixation (ORIF) technique. In this clinical study at the Royal Animal Medical Center, five consecutive dogs with diagnoses of comminuted tibial shaft fractures were treated with the MIPO surgical approach. For comparison, an additional five breed-, age-, and weight-matched dogs with comminuted tibial shaft fractures were treated with the ORIF technique. Mean healing time was $75.6{\pm}12.5$ days in the MIPO group and $131.8{\pm}18.6$ days in the ORIF group (p < 0.01). The mean surgery time in the MIPO group ($36.4{\pm}3.5$ minutes) was significantly shorter (p < 0.01) than that for the ORIF group ($47.0{\pm}2.2$ minutes). Based on the short surgical and healing times, the MIPO approach is clinically superior to the ORIF approach and should be the preferred approach in tibial fracture cases.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1995년도 추계학술대회 논문집
• /
• pp.355-360
• /
• 1995

In order to align the shaft, the dialgauge method has used as a means of solution until now. The method using a dialgauge require a great deal of labour and money due to making by hand, the accurate alignmentis not up to the expectation. For aligning the shaft, all the rotor must come to accord. It means that the moment of the point of coupling must keep being "Zero". The ideal measurement method as to material on the zero is used by straingauge which can gauge the moment at any point of the shaft. Also, the dialgauge method cannot be compared with straingauge measurement method, form the viewpoint, which can gauge in short time.hort time.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1106-1116
• /
• 2008

Single-pole transmission structures which are supported by drilled shaft foundations are usually subjected to large overturning moments with modest vertical and lateral loads. To analyze the behavior of the drilled shaft under such loading conditions, an analytical model was developed based on beam-column and subgrade reaction methods. Field model tests were performed to calibrate the developed analytical model in which additional subgrade spring models were adopted. The field test results estimated from the calibrated analytical model were compared with those calculated by one spring model and other commercial program. According to the comparison study, the developed analytical model was proven to be a useful tool to analyze the laterally loaded behavior of foundations for single-pole structures.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권8호
• /
• pp.1152-1161
• /
• 2009

신조선 선박에서 시운전 중 주 추진 시스템의 동력을 측정하는 방법은 스트레인 게이지를 이용하여 축의 변형률로부터 얻어지는 직접적인 방법과 기계적인 또는 전기적인 픽업을 이용하여 계측한 실린더연소압력으로부터 환산된 면적에 의한 간접적인 방법으로 구분할 수 있다. 이러한 동력은 장주기로 선박의 여러 가지 해상 운동에 의해서 그리고 단주기로는 축계의 비틀림, 축계 배치 및 횡진동의 영향에 의해서 변동한다. 본 논문에서는 축동력측정과 평가를 위하여 통계적인 해석법을 소개하고 있고, 저속2행정디젤엔진과 감속기를 포함 중속 4행정 디젤엔진 모델에 의해서 이들이 확인되고 있다.