• Journal of Korea Multimedia Society
• /
• v.18 no.8
• /
• pp.909-914
• /
• 2015

In wireless sensor networks, sensor nodes have a short transmission range and data is transferred from source to destination node using the multi-hop transmission. Sensor nodes are powered by battery and the link qualities are different, and the routing protocol in the wireless sensor network is one of the important technical issues. Multipath routing was proposed to reduce the data congestion and increase data throughput. In the multipath routing, however, each path can be interfered by the other path, and it can aggravate network performance. In this paper, we propose the multipath routing scheme for multi-rate wireless sensor networks. The multipath routing selects transmission paths to minimize transmission delay and path interference.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.7A
• /
• pp.1057-1062
• /
• 2000

Allow me to introduce the development of an FM transmitter. The transmitter uses millmeter waves at the frequency of 60 GHz, and it can produce as much as 20 mW power with the band width of 1 GHz. The great feature of the FM transmitter is that it has been created by the special technique of utilizing the NRD (non radiative dielectric) waveguide. The advantage of adopting the NRD waveguide is that it can significantly reduce transmission loss. We can construct a small-size NRD guide transmitter in a simple way that has superb transmission performance. The NRD guide transmitter is very useful for CATV transmission or transmission over a wide range. In addition, the transmitter has almost the same band width as optical communication, and the data transmission speed of the transmitter is faster than that of optical communication. A transmitter with these merits would be highly appreciated as a way of ultra-highspeed communication network over short distances.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.7 no.4
• /
• pp.107-117
• /
• 2008

OBE(On Board Equipment) of IR(Infrared)/RF(Radio Frequence)-DSRC(Dedicated Short Range Communication) are set up 1.25 million cars because Korea Highway Cooperation supplied in HiPass(Domestic Electronic Toll Collection System). But this DSRC system has strength and weakness of service for BIS(Bus Information System) or UTIS(Urban Traffic Information System) because BIS and UTIS are required vary high communication's performance and management. In this paper, Efficiency of IR/RF-DSRC is analyzed performance of MAC(Medium Access Control) by computer simulation for services of BIS or UTIS, so Suggested to be commensurated with medium of there service. Specially, DSRC is needed high mobility and throughput in the vary short communication range, so Analysed the transmission rate of data in each communication medium over the specific character of the MAC frame.

• Proceedings of the Korean Society of Near Infrared Spectroscopy Conference
• /
• 2001.06a
• /
• pp.3123-3123
• /
• 2001

Near infrared (NIR) spectroscopy has become a widely used method in food and beverage analysis because of its speed, accuracy and the simplicity of sample preparation. One of the basic requirements of NIR instruments is a wide dynamic range if weak, or small, absorption changes or concentrations are to be measured. Thus the instrument must be sufficiently luminous, and efficient, to enable measurements to be made in a reasonably short time, as for some applications (e.g. sorting) short response times are essential. Diode lasers function the same way as lasers but linewidths are not as narrow as typical lasers. In this work an array of seven laser diodes (in the range of 750-1100 nm) with energy outputs of around hundred milliwatts each were combined with a fast diode array spectrometer (400-1100 nm, 1024 pixels, integration time from 3 ms) as detector. Measurements in transmission mode were performed in solutions of sugars in aqueous solutions and in deuteriumoxide. The feasibility of non-destructive measurements in transmission mode was investigated for different fruits and vegetables.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.9 no.6
• /
• pp.802-812
• /
• 1998

Safety related to electric field exposure for the personnel of high voltage power plant and substation is of importance. To analyze the induced current influencing on human body in this paper, we calculate directly capacitance in three dimension which is complex and time consuming, as not to separate the voltage source and the induced object using a effective modeling technique. The proposed algorithm in this paper has been applied to 765 kV high voltage transmission line to evaluate human hazard for the induced current through the case study. As the results, the short circuit current of human body has been identified in the range of 0.3 mA to 6.8 mA. Closing to transmission line, this range of short current can exceed 5 mA that ANSI recommended let-go current. Therefore, it is necessary to countermeasure such as putting on conductive clothing in live-line maintenance of transmission line.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.9
• /
• pp.4446-4462
• /
• 2019

In this paper, we focus on interference cancellation for three-hop cognitive radio networks (CRNs) over Rayleigh fading channels. In CRNs, secondary users (SUs) are allowed to opportunistically utilize the licensed spectrum during the idle time of primary users (PUs) to achieve spectrum sharing. However, the SUs maybe power constrained to avoid interference and cover a very short transmission range. We here propose an interference cancellation scheme (ICS) for three-hop CRNs to prolong the transmission range of SUs and improve their transmission efficiency. In the proposed scheme, a flexible transmission protocol is adopted to cancel the interference at both secondary relays and destinations at the same time. And a closed-form expression for the secondary outage probability over Rayleigh fading channels is derived to measure the system performance. Simulation results show that the proposed scheme can significantly reduce the secondary outage probability and increase the secondary diversity in comparison with the traditional cases.

• Journal of Advanced Navigation Technology
• /
• v.10 no.1
• /
• pp.7-12
• /
• 2006

In this paper, we investigated performance for 5.8GHz dedicated short range communication system using OFDM which will be applied to Intelligent transportation system services. The maximum speed of a vehicle in DSRC channel is very fast as 180km/h, so a service time is very short to serve a various traffic information if hand-off is not occurred. Therefore higher bit rate is required to proved advanced and intelligent service to the drivers of various vehicle and the data transmission rate of the next generation DSRC system if being promoted over 10Mbps. The signals received in Racian channel have been simulated using the computer simulator. For performance improvement, BCH coding scheme are adopted.

• Proceedings of the IEEK Conference
• /
• 2001.06d
• /
• pp.13-16
• /
• 2001

In the Dedicated Short Range Communication (DSRC) system channel, a large number of bit errors occur because of Additive White Gaussian Noise (AWGN) and fading. When an image data is transmitted under the condition, reconstructed image quality is significantly degraded. In this paper, as an alternative to the error correcting code and/or automatic repeat request scheme, we propose an error recovery scheme for image data transmission. We first analyze how transmission errors in the DSRC system channel degrade image quality. Then, in order to improve image quality, we propose error resilient and concealment schemes for still image transmission using DCT-based fixed length coding, hamming code, cyclic redundancy check, and interleaver. Finally, we show its performance by an experiment.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2386-2388
• /
• 2005

As anti-crash and pre-crash systems in vehicles become more extensively used, the need for high performance short-range radars is playing an increasing role. This paper presents the design of a micromachined, ultra-wideband beamformer centered at 24 GHz for automotive short-range radar systems. This beamformer is a Butler matrix designed using ultra-wideband transmission-line couplers, which consist of a multilayered structure that exhibits wider bandwidth compared to conventional microstrip branch-line couplers. The circuit has been designed on a quartz substrate, and to achieve the desired coupling, lines suspended on BCB layers located at specific parts of the circuit were used, achieving a three metal layered structure in form of wide microstrips, that give low loss and a wideband response. In this paper the design and fabrication procedure of the proposed beamformer are fully described.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.11
• /
• pp.1047-1053
• /
• 2011

In this paper, we proposed an HF-band wireless power transfer system with adaptive frequency control circuit for efficiency enhancement in a short range. In general, a wireless power transfer system shows an impedance mismatching due to a reflected impedance, because a coupling coefficient is varied with respect to separation distance between two resonating loop antennas. The proposed method can compensate this impedance mismatching by varying input frequency of a voltage-controlled oscillator adaptively with respect to separation distance. Therefore, transmission efficiency is enhanced in a short distance, where large impedance mismatch occurs. The adaptive frequency circuit consists of a directional coupler, a detector, and a loop filter. In order to demonstrate the performance of the proposed system, a wireless power transfer system with adaptive frequency control circuits is designed and implemented, which has a pair of loop antennas with a dimension of 30${\times}$30 $cm^2$. From measured results, the proposed system shows enhanced efficiency performance than the case without adaptive frequency control.