• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.423-428
• /
• 2007

Programmable FIR filters are used in various signal processing tasks in medical ultrasound imaging, which are one of the major factors increasing hardware complexity. A widely used method to reduce the hardware complexity of a programmable FIR filter is to encode the filter coefficients in the canonic signed digit (CSD) format to minimize the number of nonzero digits (NZD) so that the multipliers for each filter coefficients can be replaced with fixed shifters and programmable multiplexers (PM). In this paper, a new structure for programmable FIR filters with a improved frequency response and a reduced hardware complexity compared to the conventional shift-and-add architecture using PM is proposed for implementing a very small portable ultrasound scanner. The CSD codes are optimized such that there exists at least one common nonzero digit between neighboring coefficients. Such common digits are then implemented with the same shifters. For comparison, synthesisable VHDL models for programmable FIR filters are developed based on the proposed and the conventional architectures. When these filters have the same hardware complexity, pass-band ana stop-band ripples of the proposed filter are lower than those of the conventional filter by about $0.01{\sim}0.19dB$ and by about $5{\sim}10dB$, respectively. For the same filter performance, the hardware complexity of the proposed architecture is reduced by more than 20% compare to the conventional SaA architecture.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.11B
• /
• pp.965-971
• /
• 2003

This paper suggests a low-complexity frame timing synchronization system for IEEE802.11a wireless LAN systems. The proposed timing synchronization scheme has been implemented by correlating the received OFDM preamble with quantized coefficients composed of ｛0, ${\pm}$2$^{0}$ , ${\pm}$2$^1$‥‥‥ ${\pm}$2$^{i}$ ), where i is an integer number. The 2$^{i}$ -valued coefficients enable the multipliers in the correlation system to be simplified to i-bit shifters. So we can design the correlation system using shifters instead of multipliers. We estimate the performance of the proposed scheme in comparison with conventional systems under the AWGN and Rayleigh fading channels. In this paper we show that the complexity can be reduced by 90% while still maintaining a performance comparable to that of the conventional system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.41-51
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole array antenna is constructed by the proposed flat dipole for the directional radiation pattern. Besides the vertical power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.41 no.2
• /
• pp.19-29
• /
• 2004

In this paper, the beam steering dipole phased array antenna systems for IMT-2000 base station have been designed. The designed beam steering dipole phased array antenna systems are constituted by the antenna part and the beam steering control system part. The antenna part is designed by the proposed flat dipole for the broadband characteristics, and the 8${\times}$8 dipole way antenna is constructed by the Proposed flat dipole for the directional radiation pattern. Besides the vertical Power divider is designed for the vertical power distribution. The beam steering control system part is designed the horizontal power divider for the horizontal power distribution, the 4-bit phase shifters and the driving circuit of phase shifters for the horizontal beam tilting. In order to evaluate a performance of the designed antenna systems, they were fabricated and the radiation characteristics were measured. From the measured results, we found that the horizontal beams were tilted by the each control signals, and the measured radiation characteristics showed good agreement with the design goals.

• Journal of Advanced Navigation Technology
• /
• v.22 no.2
• /
• pp.141-147
• /
• 2018

We propose a wideband 4-way quadrature divider for global navigation satellite system (GNSS). The proposed divider consists of one balun and two 2-way quadrature dividers. In the balun, the input power is divided by a wilkinson divider and the out of phase characteristic is achieved by ${\pm}90^{\circ}$ metamaterial transmission line phase shifters applied two output ports. The structures of two quadrature dividers is similar to that of the balun, but the phase shifters of two output ports are exchanged by ${\pm}90^{\circ}$ metamaterial transmission line. Metamaterial transmission lines are designed by using five LC loaded transmission line (LCL-TL) unit cells. The fabricated 4 way quadrature divider has the phase characteristic of $90^{\circ}{\pm}10^{\circ}$ in 1.165 - 1.61 GHz.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1071-1074
• /
• 2002

In this paper, power quality analysis system is proposed where voltage or current waveforms are nonsinusoidal. The proposed system relies on the FFT algorithm to compute real and reactive power. The advantage of system is that harmonic analysis is carried out on a period of the input signal. The proposed system is based on FFT processor which is designed using VHDL(Very high-speed integrated circuit Hardware Description Language). In the design of FFT processor, radix- $2^2$ is adopted to reduce several complex multipliers for twiddle factor. Complex multiplier is implemented as only shifters and adders. Therefore, the system is able to have both high hardware efficiency and high performance.

• ETRI Journal
• /
• v.35 no.5
• /
• pp.838-848
• /
• 2013

This paper presents a novel approach to automatically generate Korean multiword sentiment expressions by using a seed sentiment lexicon and a large-scale domain-specific corpus. A multiword sentiment expression consists of a seed sentiment word and its contextual words occurring adjacent to the seed word. The multiword sentiment expressions that are the focus of our study have a different polarity from that of the seed sentiment word. The automatically extracted multiword sentiment expressions show that 1) the contextual words should be defined as a part of a multiword sentiment expression in addition to their corresponding seed sentiment word, 2) the identified multiword sentiment expressions contain various indicators for polarity shift that have rarely been recognized before, and 3) the newly recognized shifters contribute to assigning a more accurate polarity value. The empirical result shows that the proposed approach achieves improved performance of the sentiment analysis system that uses an automatically generated lexicon.

• JSTS:Journal of Semiconductor Technology and Science
• /
• v.12 no.2
• /
• pp.203-211
• /
• 2012

This paper proposes a $16{\times}16$ and $32{\times}32$ inverse transform architecture for HEVC (High Efficiency Video Coding). HEVC large transform of $16{\times}16$ and $32{\times}32$ suffers from huge computational complexity. To resolve this problem, we proposed a new large inverse transform architecture based on hardware reuse. The processing element is optimized by exploiting fully recursive and regular butterfly structure. To achieve low area, the processing element is implemented by shifters and adders without multiplier. Implementation of the proposed 2-D inverse transform architecture in 0.18 ${\mu}m$ technology shows about 300 MHz frequency and 287 Kgates area, which can process 4K ($3840{\times}2160$)@ 30 fps image.

• Journal of IKEEE
• /
• v.16 no.3
• /
• pp.197-202
• /
• 2012

As more and more cores are integrated on a single chip, power consumption has become an important problem in system-on-a-chip (SoC) design. Multiple supply voltage (MSV) design is one of popular solutions to reduce power consumption. We propose a new method that determines voltage level of cores before floorplanning stage. Besides, our algorithm includes a new approach to optimize wire length and the number of level shifters without any significant decrease of power saving. In simulation, we achieved 40-52% power saving and a considerable improvement in runtime, whereas an increase in wire length and area is less than 8%.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.05b
• /
• pp.78-81
• /
• 2002

Ferroelectric thin film is a very attractive material for the tunable microwave device applications such as electronically tunable mixers, delay lines, filters and phase shifters. Thin films of $Pb_{x}Sr_{1-x}TiO3(PST)$ were fabricated onto Pt/Ti/SiO2/Si substrate by the sol-gel method. We have investigated the structural and dielectric properties of PST(50/50) thin films for tunable microwave device applications. The PST thin films show typical polycrystalline structure with a dense microstructure without secondary phase formation. Dielectric properties of PST films are strongly dependent on annealing temperature. The dielectric constants, loss and tunability of the PST (50/50) thin films were 404, 0.023 and 51.73 %, respectively.