• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집B
• /
• pp.422-427
• /
• 2000

The design of low-solidity vaned diffusers and the effect on the performance of a turbocharger compressor is discussed. The effect of vane number and turning angle was investigated while maintaining a basic design with a leading edge angle of $70^{\circ}$, leading and trailing edge radius ratios of 1.1 and 1.3. All results are compared with those obtained with the standard vaneless diffuser configuration and it was shown that all designs increased and shifted the pressure ratio to reduced flowrates. Despite the low-solidity configuration none of the vane designs provided a broad operating range, and the vane leading edge angle was not main factor that system went into the surge condition. The diffuser of higher trailing edge angle improved the flow range for the compressor to operate at lower flow region.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.1008-1012
• /
• 1997

This study is on a mathematical model of profile shifted involute gear, and this model is based on Camus's theory. Gear is general mechanical elements that used for power transmission between two shafts that interval is comparatively short. and it delivers bit power as accurate ratio of speed. The profile of Spur gear which is the most basic factor is divided into Trochoidal fillet curve and Involute curve. Involute curve is used a lot of a shape curve of machine parts such as a gear, a scroll compressor and a collar of centrifugal pump. However, It is poor to study the modeling of Trochoidal fillet curve and the three dimensions model shaped mathematical curve. So we draw three dimensions gear have accurate mathematical function using ADS(Automatic Drawing system), VisualLISP. To check accuracy and perfection, we make a program of checking Interference. and use for this study.

• 동력기계공학회지
• /
• 제11권3호
• /
• pp.41-46
• /
• 2007

The microstructure and electrochemical analysis of welds of electric resistance welding(ERW) pipe were investigated. The direction of metal flow line in HAZ of ERW pipe shifted to the inner(or outer) surface of pipe by plastic deformation during welding. The lowest heat input welds of ERW pipe was showed crack by liquid penetrant testing. Accelerated corrosion test by constant current density of 20mA/$cm^{2}$ developed groove at the welds of ERW pipe and the measured grooving factors were about $1.2{\sim}1.5$. Corrosion potential of base metal obtained by cyclic polarization in artificial sea water(3.5wt.% NaCl solution) was 100mV higher than that of weld metal of ERW pipe.

• 한국세라믹학회지
• /
• 제23권1호
• /
• pp.7-12
• /
• 1986

Dielectric properties of $Ba_{0.9}Ca_{0.1}(Ti_{1-x}Sn_x)O_3$ were investigated from x=0 to 0.20, and temperature range -4$0^{\circ}C$~13$0^{\circ}C$ Density and grain size decreased with increasing Sn content due to grain growth inhibitor. Dielectric constant below the Curie temperature increased with increasing Sn content and dissipation factor dec reased. These results are due to grain size effect and internal stress. Curie temperature was shifted to lower temperature with increasing ratio of total polarizability to volume resulting from substitution of $Ba^{2+}$ ion with $Ca^{2+}$ ion $Ti^{4+}$ ion with $Sn^{4+}$ ion.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2006년도 전력전자학술대회 논문집
• /
• pp.128-130
• /
• 2006

We introduce 2[MVA] 3300[V] 7-level voltage source inverter system developed by POSCON and describe the main characteristics of inverter system i.e. PWM converter, H-bridge power module, phase shifted carrier PWM The PWM converter is a three-phase boost converter, which operates in a 4-quadrant and in a nearly unit displacement power factor. Experimental waveforms are also presented to verify the proposed method and performance of the developed system.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 1998년도 Proceedings ICPE 98 1998 International Conference on Power Electronics
• /
• pp.586-591
• /
• 1998

This paper presents an innovative prototype of a new conceptual electromagnetic induction-based fluid heating appliance using voltage-fed series capacitor-compensated load resonant high-frequency IGBT inverter with a phase-shifted PWM and a power factor correction schemes. Its operating characteristics in steady-state and dynamic state are illustrated including unique features and evaluated on the basis of its computer simulation and experimental results of 10kw breadboard appliance developed for hot water producer and superheated steamer.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 추계학술대회 논문집
• /
• pp.709-712
• /
• 2002

For the electro-discharge machining of an electro-conductive anisotropic composite, an unsteady state formulation was established and solved by Galerkin's finite element method. The distribution of temperature on work piece, the shape of the crater and the material removal rate were obtained in terms of the process parameters. As the spark was initiated the workpiece immediately started to melt and the heat affected zone was formed. The moving boundary of the crater was also identified with time. When the radial and axial conductivities were increased separately the temperature distribution and the shape of the crater were shifted in the same direction respectively and the material removal rate was found to be higher in the case of increasing radial conductivity rather than the axial conductivity.

• 공학교육연구
• /
• 제16권2호
• /
• pp.37-49
• /
• 2013

In this paper, articles in full body of JEER in Korea and JEE in U.S. were classified into two categories- Research area and Key words-to endeavor a comparative study of the engineering education research(EER) topics and their temporal changes. In the recent 4 year term, 'Accreditation of Engineering Education' and 'Courses & Curriculum' were the most common key words appearing in JEER and 'Researches on EER' and 'Learner's Factor' in JEE. If we put curriculum/teaching materials/teaching as the input elements and learning/assessment as the output elements for education achievement, JEE demonstrates that many of the research topics have shifted from input to output in the recent years, while JEER research is in the transient stage.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2003년도 춘계학술대회논문집
• /
• pp.269-274
• /
• 2003

Vibration table is required to obtain high packing density in expendable pattern casting process. Packing density, which is an important manufacture factor, depends on the vibration pattern induced by vibration table. Modal test is utilized to identify the dynamic characteristics of vibration table. And finite element method is used to modify flask by fixing the stiffener. The positions of stiffener to modify are found and the natural frequency could be easily shifted to the objective value by using sensitivity analysis.

• 제어로봇시스템학회논문지
• /
• 제20권10호
• /
• pp.1002-1007
• /
• 2014

This paper deals with the adaptive backstepping hovering control for a quadrotor with model parameter uncertainties. In this paper, the backstepping based technique is utilized to design a nonlinear adaptive controller which can compensate for the motor thrust factor and the drag coefficient of a quadrotor. First, the quadrotor nonlinear dynamics is derived using Newton-Euler formulation. In particular, we use the ${\pi}/4$ shifted coordinate for x- and y-axis of a quadrotor. Second, an adaptive backstepping based attitude and altitude tracking control method is presented. The system stability and the convergence of tracking errors are proven using the Lyapunov stability theory. Finally, the simulation results are given to verify the effectiveness of the proposed control method.