• Computers and Concrete
• /
• 제29권2호
• /
• pp.117-126
• /
• 2022

The vibrational characteristic of three-layered cylindrical shell (CS) submerged in fluid with the ring support has been studied. The inner and outer layer is supposed to construct by isotropic layer. The composition of central layer is of functionally graded material type. Acoustic Wave condition has been utilized to present the impact of fluid. The central layer of cylindrical shell (CS) varies by volume fraction law that has been expressed in terms of polynomial. The main shell frequency equation has been obtained by theory of Love's shell and Rayleigh-Ritz technique. The oscillation of natural frequency has been examined under a variety of end conditions. The dependence of axial model has been executed with the help of characteristic beam function. The natural frequencies (NFs) of functionally graded material (FGM) shell have been observed of cylindrical shell along the shell axial direction. Different physical parameters has been used to examine the vibration characteristics due to the effect of volume fraction law. MATLAB software has been used to get result.

• 한국세라믹학회지
• /
• 제48권5호
• /
• pp.447-453
• /
• 2011

The monodisperse spherical $SiO_2$ particles were overcoated with $Y_2O_3:Eu^{3+}$ phosphor layers via a Pechini sol-gel process and the resulting $SiO_2@Y_2O_3:Eu^{3+}$ core-shell phosphors were subsequently annealed at $800^{\circ}C$ at an ambient atmosphere. The crystallographic structure, morphology, and luminescent property of core-shell structured $SiO_2@Y_2O_3:Eu^{3+}$ phosphors were characterized by X-ray diffraction (XRD), field emission scanning electron microscopy (FE-SEM), and photoluminescence (PL). The spherical, nonagglomerated $SiO_2$ particles prepared by a Stober method exhibited a relatively narrow size distribution in the range of 260-300 nm. The thickness of phosphor shell layer in the core-shell particles can be facilely controlled by varying the coating number of $Y_2O_3:Eu^{3+}$ phosphors. The core-shell structured $SiO_2@Y_2O_3:Eu^{3+}$ phosphors showed a strong red emission, which was dominated by the $^5D_0-^7F_2$ transition (610 nm) of $Eu^{3+}$ ion under the ultraviolet excitation (263 nm). The PL emission properties of $SiO_2@Y_2O_3:Eu^{3+}$ phosphors were also compared with pure $Y_2O_3:Eu^{3+}$ nanophosphors.

• 폴리머
• /
• 제34권1호
• /
• pp.38-44
• /
• 2010

탄산칼슘/유기계 core-shell 입자를 제조하기 위해 core로는 침강성 탄산칼습을 사용하였고, shell로서는 여러 종류의 methyl methacrylate(MMA), ethyl acrylate(EA), n-butyl acrylate(BA), styrene(St), 2-ethylhexyl acylate(2-EHA)을 사용하여, 반응 온도 유화제, 개시제의 종류와 첨가량을 변화시킨 후에 유화중합을 시켜 최적의 유화중합 조건을 구하였다. 생성된 core-shell 입자의 구조는 FT-IR로, 입자크기와 형태는 입도 분석, SEM, TEM으로 각각 측정하였다. 그리고, 이 core-shell 입자에 부직포를 함침시켜 처리전후의 표면변화는 접촉각으로 확인하였다. 또한, 함침 처리 전후의 부직포/부직포 소재와 관능성 단량체 첨가한 부직포/부직포 소재의 박리 접착강도를 측정하여 상호 비교하였다. 탄산칼슘/유기 core-shell 입자 합성의 경우에는 유화제인 SDBS를 0.5 wt% 첨가한 탄산칼슘을 core로 하여 MMA와 0.1 wt% 농도의 APS를 단계적으로 주입하여 중합함으로써 탄산칼슘입자 표면에 단량체의 중합이 잘 유도될 수 있었으며 중합 도중에 새로운 중합체 입자의 생성이 적었다.

• 접착 및 계면
• /
• 제3권4호
• /
• pp.27-36
• /
• 2002

다양한 가능을 가진 고분자 복합재료인 Core-shell 복합인자를 제조하여 부직포 바인더로 사용하기 위하여 유기/유기계 core-shell 에멀젼 중합을 시도하였다. 유기/유기계 Core-shell 중합으로 메틸메타아크릴레이트(MMA), 스티렌(St)의 core와 shell의 단량체, 개시제는 과황산암모늄(APS) 유화제는 도데실벤젠슬폰나트륨(SDBS)의 농도, 교반속도를 변화시켜 전환율, 분자량, 입자경과 입자형태, 유리전이온도, 인장강도를 측정하여 최적반응조건을 산출하였다. 1) PMMA, PSt core와 shell의 입자중합은 각각 개시제의 농도 $1.58{\times}10^{-3}mol/L$와 $4.0{\times}10^{-4}mol/L$가 최적이다. 2) PMMA/PSt의 PMMA core 중합에서 유화제의 농도는 $1.45{\times}10^{-5}mol/L$, PSt/PMMA의 PSt core 중합은 $2.91{\times}10^{-5}mol/L$가 최적이다. 3) 유화중합에 최적교반속도는 200 rpm이며, 입자안정성은 유화제 첨가량과 비례하여 증가하였다. 4) Core-shell 복합입자는 동일조성의 공중합체에 비하여 유리온도 조절이 용이하고, 인장강도값도 높게 측정되었다.

• 대한용접접합학회:학술대회논문집
• /
• 대한용접접합학회 2006년도 춘계 학술대회 개요집
• /
• pp.97-99
• /
• 2006

A ship owner has been disappointed with the wrinkle, phenomenon visually occurring at the side shell structure of VLCC(very large crude oil carrier). In order to solve this problem, we have firstly performed a variety of actual measurements. Furthermore, comparing the welding deformation level of DSME(Daewoo Shipbuilding & Marine Engineering Co. Ltd.) with that of SHI(Samsung Heavy Industries), the superiority of deformation control level of Korean shipyard has been substantiated.

• 한국공간구조학회논문집
• /
• 제4권4호
• /
• pp.77-84
• /
• 2004

Researches on spherical shell which is most usually applied have been completed by many investigators already and generalized numerical formula was derived. But the existent researches are limited to those on spherical shell with isotropic or orthotropic roof stiffness, periodic distribution of roof stiffness that can be caused by spherical and latticed roof system is not considered. Therefore, the object of this study is to develop a structural analysis program to analyze spherical shells that have periodicity of roof stiffness distribution caused by latticed roof of large space structure, grasp buckling characteristics and behavior of structure.

• 한국정밀공학회지
• /
• 제19권6호
• /
• pp.43-50
• /
• 2002

In the design of structure, the forces acting on tai structure are key parameter fur noise and vibration control. However, in the complex structure, the forces at the injection point on the structure cannot be measured directly. So, it is necessary to find out Indirect force evaluation method. In this paper, forces have been measured with In-situ vibration responses and system information. And, three existing techniques of indirect force measurement, vita. direct inverse. principal component analysis and regularization have been compared. This paper shows that multi-vibration responses are essential for talc precise estimation of the forces. To check these conditions, rotary compressor is adopted as test sample, because it is very difficult to measure the injection forces from internal excitation to shell. It alas also been obtained that relatively higher force is transmitted through three welding paths to the compressor shell. It shows a good agreement between direct and indirect force evaluation with curvature shell and plate.

• 비파괴검사학회지
• /
• 제31권4호
• /
• pp.335-342
• /
• 2011

FBG (Fiber Bragg Grating) 변형률 센서를 이용하여 철골트러스 지붕의 변형을 계측하였다. 이는 특수한 형태인 콘크리트 역쉘 구조물의 시공 중 안정성을 평가하기 위함이었다. 구조해석을 통하여 FBG 센서의 설치위치를 결정하였으며, 센서를 통한 변형률 값을 구조해석 값과 비교하였다. 이를 통하여 특수 구조물의 시공 중 계측을 위한 사전계측 계획의 필요성을 확인 할 수 있었고, 측정된 변형률 값이 구조해석 값을 통한 허용범위 내에 있어, 대상 구조물은 안전한 것으로 판단되었다.

• Structural Engineering and Mechanics
• /
• 제62권5호
• /
• pp.551-565
• /
• 2017

Based on the strain gradient theory (SGT), vibration analysis of an embedded micro cylindrical shell reinforced with agglomerated carbon nanotubes (CNTs) is investigated. The elastic medium is simulated by the orthotropic Pasternak foundation. The structure is subjected to magnetic field in the axial direction. For obtaining the equivalent material properties of structure and considering agglomeration effects, the Mori-Tanaka model is applied. The motion equations are derived on the basis of Mindlin cylindrical shell theory, energy method and Hamilton's principal. Differential quadrature method (DQM) is proposed to evaluate the frequency of system for different boundary conditions. The effects of different parameters such as CNTs volume percent, agglomeration of CNTs, elastic medium, magnetic field, boundary conditions, length to radius ratio and small scale parameter are shown on the frequency of the structure. The results indicate that the effect of CNTs agglomeration plays an important role in the frequency of system so that considering agglomeration leads to lower frequency. Furthermore, the frequency of structure increases with enhancing the small scale parameter.

• Steel and Composite Structures
• /
• 제24권2호
• /
• pp.249-264
• /
• 2017

In this paper free linear vibration of lattice composite conical shells will be investigated. Lattice composite conical shell consists of composite helical ribs and thin outer skin. A smeared method is employed to obtain the variable coefficients of stiffness of conical shell. The ribs are modeled as a beam and in addition to the axial loads, endure shear loads and bending moments. Therefore, theoretical formulations are based on first-order shear deformation theory of shell. For verification of the obtained results, comparison is made with those available in open literature. Also, using FEM software the 3D finite element model of composite lattice conical shell is built and analyzed. Comparing results of analytical and numerical analyses show a good agreement between them. Some special cases as variation of geometric parameters of lattice part, effect of the boundary conditions and influence of the circumferential wave numbers on the natural frequencies of the conical shell are studied. It is concluded, when mass and the geometrical ratio of the composite lattice conical shell do not change, increment the semi vertex angle of cone leads to increase the natural frequencies. Moreover for shell thicknesses greater than a specific value, the presence of the lattice structure has not significant effect on the natural frequencies. The obtained results have novelty and can be used for further and future researches.