Abstract
Application of FBG (Fiber Bragg Grating) sensors to measure strain of steel roof trusses has been performed. This is to check and confirm the structural integrity of an unusually shaped, reverse shell structure made of reinforced concrete. The issue was to place sensors at proper location and compare the measured values to the results from structural analysis. It has been learned that a deliberate measurement scheme is needed in order to monitor a complex structure during construction. In this study, the measured values were within allowable range of strain, thus confirming the safety of the structure during measurement and construction.
FBG (Fiber Bragg Grating) 변형률 센서를 이용하여 철골트러스 지붕의 변형을 계측하였다. 이는 특수한 형태인 콘크리트 역쉘 구조물의 시공 중 안정성을 평가하기 위함이었다. 구조해석을 통하여 FBG 센서의 설치위치를 결정하였으며, 센서를 통한 변형률 값을 구조해석 값과 비교하였다. 이를 통하여 특수 구조물의 시공 중 계측을 위한 사전계측 계획의 필요성을 확인 할 수 있었고, 측정된 변형률 값이 구조해석 값을 통한 허용범위 내에 있어, 대상 구조물은 안전한 것으로 판단되었다.