• 한국생활과학회지
• /
• 제22권1호
• /
• pp.131-140
• /
• 2013

Eco-friendly and health-functional clothing is now becoming the target of the worldwide hot trends. The purpose of this study is to develop an eco-friendly textiles to decrease environmental pollution and to be harmless for human health by investigating how the natural chorangak liquid treatment affects the changes of mechanical properties and the hand of silk fabrics according to different treatment conditions. Treatment was varied with various temperatures ($85^{\circ}C$, $90^{\circ}C$, $95^{\circ}C$) for 90 seconds after degumming. The results were as follows: 1) The natural chorangak liquid is the most effective at the ratio of glacial acid 200ml with eggshell 20g minimizing the time limit and sludge reduction. Its treatment of silk fabrics is optimized at $90^{\circ}C$ for 90 seconds with 25% conc. after degumming when considering tenacity and elongation. 2) After the treatment, tenacity and elongation of specimen are increased compared with those of degummed silk fabrics. 3) After analyzing the effect of the treatment on the characteristic values of basic mechanical properties of silk fabrics, mechanical properties (tensile, bending, shearing, compression, surface) are overall improved. The properties of thickness and weight are increased as well. 4) Based on the clear analysis on effects of the treatment on the mechanical properties and the hand of silk fabrics, the level of THV was enhanced from good to excellent. Therefore, chorangak liquid can be utilized satisfactorily as a new finishing agent for developing eco-friendly textiles.

• Journal of Advanced Research in Ocean Engineering
• /
• 제2권2호
• /
• pp.86-98
• /
• 2016

In this study, after the installation of a subsea pipeline, backfilling was performed in the trenched area. During these operations, a stability problem in the subsea pipeline occurred. The pipeline was directly impacted by environmental loading such as waves and currents that were caused by backfill material when scouring or sediment transport and siltation was carried out. Therefore, this study reviewed whether trenching was necessary, and conducted research into an indigenous seabed property that contains granular soil. A study of cohesive soil was also conducted in order to cross-correlate after calculating the values of the critical Shields parameter relevant to elements of the external environment such as waves and current, and the shear Shields parameter that depends on the actual shearing stress. In case of 1), sedimentation or erosion does not occur. In the case of 2), partial sedimentation or erosion occurs. If the case is 3), full sedimentation or erosion occurs. Therefore, in the cases of 1) or 2), problems in structural subsea pipeline stability will not occur even if partial sedimentation or erosion occurs. This should be reflected particularly in cases with granular and cohesive soil when a reduction in shear strength occurs by cyclic currents and waves. In addition, since backfilling material does not affect the original seabed shear strength, a set-up factor should be considered to use a reduced of the shear strength in the original seabed.

• 한국의류학회지
• /
• 제35권8호
• /
• pp.968-981
• /
• 2011

This study examines the effect of the structure of Intarsia and Jacquard knit on mechanical properties of knit fabrics to suggest data for knit design. Intarsia and 7 types of Color Jacquard (Floating Jacquard, Normal Jacquard, Bird's eye Jacquard, Tubular Jacquard, Ladder's back Jacquard, Blister Jacquard, and Transfer Jacquard) were used. The samples with a gauge of 14 were knitted using 100% wool 2/48's yarn by Shima Seiki SIG computer knitting machine. The Objective Hand was measured by KES-FB system and HV and THV were calculated by the formula of KN-402-KT and KN-301-winter respectively. The results showed that Intarsia and Floating Jacquard are thin, flexible and light, Bird's eye Jacquard is slick, flat and slim, Tubular Jacquard is stiff and undrapable, Ladder's back Jacquard is difficult in shearing deformation and relatively bulky, Blister Jacquard is thickest and transfer jacquard is uneven in surface contour. The selection of proper structure is important for the knit apparel production since the thickness and weight of knit determine the amount of yarn needed and consequently the production cost. The hands of Ladder's back Jacquard and Tubular Jacquard are superior to those of other structures. Intarsia and Floating Jacquard which are thin, light and flexible seem to be good structures for designs showing a body silhouette whereas, Bird's eye Jacquard, Tubular Jacquard and Blister Jacquard (which are thick, heavy, and stiff) are suitable for a boxy silhouette.

• Fibers and Polymers
• /
• 제6권4호
• /
• pp.322-331
• /
• 2005

Graduated compression stockings (GCS) have been widely used for the prophylaxis and treatment of venous diseases. Their gradient pressure function largely related to their fabric structure and material properties. By combing fabric physical testing and wear trials, this study investigated the GCSs fabric structure and material properties at different locations along the stocking hoses, and quantitatively analyzed the effects of fabrics on skin pressure longitudinal and transverse distributions. We concluded that, Structural characteristics and material properties of stocking fabrics were not uniform along the hoses, but a gradual variation from ankle to thigh regions, which significantly influenced the corresponding skin pressure gradient distributions; Tensile (WT, EM) and shearing properties (G) generated most significant differences among ankle, knee and thigh regions along the stocking hose, which significantly influenced the skin pressure lognitudinal gradient distribution. More material indices generating significant gradual changes occurred in the fabric wale direction along stocking hose, meaning that materials properties in wale direction would exert more important impact on the skin pressure gradient performances. And, the greater tensibility and smoother surface of fabric in wale direction would contribute to put stocking on and off, and facilitate wearers' leg extension-flexion movements. The indices of WT and EM of stocking fabrics in series A have strong linear correlations with skin pressure lognitudinal distribution, which largely related to their better performances in gradual changes of material properties. Skin pressure applied by fabric with same material properties produced pronounced differences among four different directions around certain cross-sections of human leg, especially at the ankle region; and, the skin pressure magnitudes at ankle region were more easily influenced by the materials properties, which were considered to be largely related to the anatomic structure of human leg.

• 패션비즈니스
• /
• 제7권4호
• /
• pp.121-128
• /
• 2003

A new textile material, poly(trimethylene terephthalate) polymer, has been introduced to the textile industry. The structure of PTT is similar to the PET, while the tensile deformation and subsequent recovery property is better than that of PET. In this study, the physical and mechanical properties of textile woven fabrics made of PTT, PET, and nylon 6 yarns as the filling yarn were determined using the Kawabata Evaluation System (KES), including tensile, bending, shearing, compression, and surface related parameters. On top of these measurements, the subjective ratings by evaluators were performed on the fabric samples. From the examination of the stress-strain behavior of the yarn specimens focused on the recovery mode, it was evident that the PTT specimen developed lower stress at 3% elongation. The subsequent recovery curve showed that the PTT has less stress-decay rate than the other specimens, implying that the recovery behavior of the PTT is recommendable for the end-uses including stretchable textile materials, sports wears, etc. The KES bending rigidity(B) value of the PTT sample fabric was lower than that of the PET sample fabric. Subjective evaluation of the fabric samples by the evaluators on the descriptive word pair "soft - not soft" showed similar tendency with the KES B determination of the fabric samples.

• 한국도로학회논문집
• /
• 제19권2호
• /
• pp.97-102
• /
• 2017

PURPOSES : Emulsified asphalt is critical for road construction. The objective of applying asphalt emulsion as an adhesive is to prevent the phenomenon of debonding between the upper and lower layers. The quantity and veriety of bituminous material can be varied according to the type of pavement and site conditions. The objective of this study is to reveal the optimum application rates of the emulsified asphalt materials by types of tack-coats using Interface Shear Strength(ISS). METHODS : In the research, emulsified asphalt was paved on the surface of the divided mixture. The specimens of paving asphalt emulsion were utilized to evaluate the bond strength of tack-coat materials. In the evaluation process, NCHRP Report 712 was utilized to investigate the Interface Shear Strength, which reflects the bond capacity of asphalt emulsion. Then, the optimum residual application rates by tack-coat types were determined using regression analysis. RESULTS :As a consequence of squared R values investigated from 0.7 to 1 as part of the regression analysis, the tendency of predicted ISS values was compared with the results. The optimum residual application rates of AP-3, RS(C)-4, QRS-4, and BD-Coat were determined to be $0.78{\ell}/m^2$, $0.51{\ell}/m^2$, $0.53{\ell}/m^2$, and $0.73{\ell}/m^2$, respectively, utilizing 4th regression analysis. CONCLUSIONS :Based on the result of this study, it was not feasible to conclude whether higher residual application of tack-coat material leads to improved bond capacity. Rather, the shearing strength varies depending on the type of pavement.

• 한국지반공학회지:지반
• /
• 제8권2호
• /
• pp.45-58
• /
• 1992

지반재료의 탄소성 구성 모델은 유연성과 안정성을 동시에 만족하여야 공학적으로 의미를 가지며 실용적으로 사용될 수 있다. 본 연구에서는 안정성이 있는 계수를 사용하는 수정 Cam-clay 모델을 근간으로, 한계상태 간격비를 계수로 도입하여 더욱 유연성이 있는 모델을 제안하였다. 한계상태 간격비는 추가적인 실험없이 간편하게 구할 수 있으며 특히 비배수 전단거동에 대하여 실용적으로 사용될 수 있다. 제안된 모델은 비 배수전단 삼축압축시험에 대하여 응력경로 및 응 력-변형률관계를 수정 Cam-clay 모델에 비하여 매우 정확하게 예측할 수 있었다. 뿐만 아니라 전단변형률 속도, 크리프 및 응력이완의 영향을 고려할 수 있었다. 특히 실제의 상태경계면을 표현 탄성 -완전소성모델, 사용해야 삼축압축시험중 비 배수시험이 W W 삼축압축시험시 전단시험을 논문에서 해석한 점토질 지반의 거동에 대하여 관련유동칙을 따른다는 가정이 잘 적용되기 때문이라고 판단된다.

• 한국재료학회지
• /
• 제21권12호
• /
• pp.655-659
• /
• 2011

An ultrafine grained complex aluminum alloy was fabricated by an accumulative roll-bonding (ARB) process using dissimilar aluminum alloys of AA1050 and AA5052 and subsequently annealed. A two-layer stack ARB process was performed up to six cycles without lubricant at an ambient temperature. In the ARB process, the dissimilar aluminum alloys, AA1050 and AA5052, with the same dimensions were stacked on each other after surface treatment, rolled to the thickness reduction of 50%, and then cut in half length by a shearing machine. The same procedure was repeated up to six cycles. A sound complex aluminum alloy sheet was fabricated by the ARB process, and then subsequently annealed for 0.5h at various temperatures ranging from 100 to $350^{\circ}C$. The tensile strength decreased largely with an increasing annealing temperature, especially at temperatures of 150 to $250^{\circ}C$. However, above $250^{\circ}C$ it hardly decreased even when the annealing temperature was increased. On the other hand, the total elongation increased greatly above $250^{\circ}C$. The hardness exhibited inhomogeneous distribution in the thickness direction of the specimens annealed at relatively low temperatures, however it had a homogeneous distribution in specimens annealed at high temperatures.

• 대한의용생체공학회:의공학회지
• /
• 제21권4호
• /
• pp.433-439
• /
• 2000

볼륨 렌더링은 기하학적인 기본 도형으로 모델링하지 않고, 3차원 데이터를 직접 가시화하는 방법이다. 이런 볼륨 렌더링의 특성으로 말미암아 3차원 영상을 도시할 때에, 복잡한 물체의 경우에도 물체의 표면을 상세하게 표현하는데 유리하여 의료 영상을 가시화하는 쪽으로의 적용이 많이 이루어져 왔다. 일반적으로 볼륨 데이터의 크기가 커서 실시간으로 처리하기 쉽지 않기 때문에, 근래에는 이 렌더링 시간을 줄이기 위해서 많은 여러 가지 렌더링 알고리즘이 제안되었다. 본 논문에서는 부호화 되어 있지 않은 볼륨 데이터를 빠르게 렌더링 하기 위해서, 쉬어-왑 분해를 이용하는 블록 기반의 볼륨 렌더링 기법을 제안한다. 이 방법에서는 블록 기반의 데이터와 함께 장기의 영역 분할 데이터를 동시에 이용하여 볼륨 렌더링을 수행하므로써, 부호화되어 있지 않은 데이터에 대해 렌더링 속도를 증가시킨다. 본 논문에서는 3차원 X-ray CT 흉부 영상과 MR 3차원 두부 영상을 렌더링 함으로써 제안한 방법의 성능을 검증하였다.

• Journal of the Korean Wood Science and Technology
• /
• 제49권2호
• /
• pp.181-190
• /
• 2021

Screw-type fasteners are widely used to make connections between wood members or between wood and steel connectors because they can tolerate the applied loads by withdrawal or shearing. In this study, we evaluated the withdrawal resistances of the screw-type fasteners and analyzed the effects of the lead-hole size, relative grain direction (tangential, radial, and cross-sections) of the wood member, screw diameter, screw type, and species. Two wood species, including domestic larch and imported spruce, and three screw-type fasteners, including domestic lag screws (diameters of 9.46, 7.79, and 6.27 mm), domestic tapping screw (diameter, 6.3 mm), and imported Sherpa screw (diameter, 8.0 mm) were used. To assess the effect of lead-hole size, the lead holes with diameters corresponding to 68.7%, 70.8%, and 74.0% of the shank diameter of the lag screw were predrilled. The lead hole corresponding to 74% of the shank diameter was selected for this study because the smaller lead holes required higher rotational force for installation, which may cause damage in the screw neck, although there was no significant difference in the withdrawal resistance depending on the lead-hole sizes applied in this study. The lag screws installed on the tangential and radial surfaces showed similar withdrawal resistances to each other, which were greater than those installed on the cross-sectional surface. As the lag screw diameter increased from 6.27 mm to 9.46 mm, the withdrawal resistance also increased proportionally. The withdrawal resistance of the tapping screw having a diameter of 6.3 mm was almost 1.6 times higher than that of the lag screw having a similar diameter of 6.27 mm, while that of Sherpa screw having a diameter of 8.0 mm was around 1.4 times higher than that of the lag screw having a similar diameter of 7.79 mm.