• Journal of Korea Technical Association of The Pulp and Paper Industry
• /
• v.29 no.4
• /
• pp.28-35
• /
• 1997

Sole-binder formulation has been recently introduced to solve the problems of coating process and printability caused by use of natural polymer However, the decrease of natural polymer application causes another problem in paper coating. Therefore, synthetic thickener is used to get similar effect to natural polymer usage. In this study. low shear viscosity, dewatering of coating colors were measured to evaluate the performance of the alkali sensitive water retention and rheology modifiers. The effects of alkali sensitive thickener on the physical properties of coated paper and printability were also investigated. The gloss and printability of coated paper containing the synthetic flow modifier were similar or superior to those of CMC containing coated paper. This modifier was also effective to improve the problems caused by the use of starch. The results indicated that the flow modifier synthesized with alkali sensitive thickener can reduce the problems of natural polymer and could be a good substitute f3r a natural polymer.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2016.05a
• /
• pp.205-206
• /
• 2016

This study examines the effect of binding material and alkali activator on the rheology characteristics of alkali active mortar quantitatively, and a result is as follows. In the 1/2 slump flow, the higher mixing ratio of the fly ash has been shown to increase the table flow. the reason is that fly ash ball bearing action. When viewed in the consistency curve, the higher mixing ratio of the blast furnace slag powder was higher shear stress.

• Elastomers and Composites
• /
• v.50 no.4
• /
• pp.304-313
• /
• 2015

In this study, the anionic emulsified asphalt was prepared by dispersing asphalt particles evenly into water with combination of anionic and nonionic surfactants. Effects of NaOH and $CaCl_2$ on the phase stability of the emulsified asphalt were also investigated through zeta potential value and rheology behavior; the emulsified asphalt added with NaOH and $CaCl_2$ showed higher zeta potential value than that the asphalt with addition of only anionic and nonionic surfactants. In addition, with regard to shear thinning behaviors, it was found that pH of the emulsified anionic asphalt and $Ca^{2+}$, counter ion, affected the phase stability. SBR (styrene-butadiene-rubber) latex, EPD (water dispersed Epoxy), PU (polyurethane) and RI-10S, SBS (styrene-butadiene-styrene)-based property improvement additive, were used and studied to enhance the adhesion properties with the aggregates. RI-10S, however, was found to be only compatible with the anionic emulsified asphalt; the coating rate, adhesion and compression strength were increased with the RI-10S content.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.1-6
• /
• 1998

액체와 액체를 교반할 경우 혹은 두가지 이상의 상이 함께 반응하는 화학공정의 경 우에서는 비상용성인 액체들을 난류조건하에 분산시켜 섞이게 한다. 부산계로 구성된 중합 반응기의 경우 분산입자의 크기는 최종제품의 생산성 및 품질에 큰 영향을 미치게 되므로 분산입자의 크기를 예측하는 것은 대단히 중요하다. 이러한 분산계에서 분산입자의 크기는 분산입자가 겪는 유동장에 의해 결정된다. 오일/오일 분산계로 이루어진 고분자 유탁액의 난류교반시 유동장은 종종 점성전단 부영역에 속하게 되는데 이경우의 분산입자의 크기를 예측하는 모델에 대한 연구는 별로 이루어지지않았다. 본연구에서는 오일/오일 분산계의 고 분자 유탁액에 대한 분산입자의 크기를 예측하는 모델식을 유체동력학적인 이론을 배경으로 하여 개발하였다. 개발한 모델식을 난류교반을 겪은 오일/오일 분산계를 거쳐 생산된 제품 인 내충격성 폴리스티렌으로 검증하여 모델식의 타당성을 입증하였다.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.7-13
• /
• 1998

중량 평균 분자량이 1.22$\times$106이고 다분산도가 8.90이며 수분과 아밀로오스 함량이 각각 9.35%, 27%인 도토리 전분에 sucrose를 첨가하여 동적 유변학적 특성에 대한 온도와 농도의존성을 고찰하였다. AS(acorn starch)-sucrose 계의 점도는 전단속도가 증가하면 감 소하는 전단담화 현상을 나타내며 sucrose 농도가 증가할수록 점도가 증가하였고, Casson 식에 의해 얻어진 항복치는 sucrose 농도가 증가하면 증가하였다. 저장영률과 손실영률은 sucrose 농도가 증가하면 단일하게 증가하였고 손실 탄성률은 온도가 증가하면 감소하였다. DSC 측정자료를 zipper model에 적용시켜 본 결과 sucrose 농도가 증가할수록 zipper의 수 와 junc-tion zone의 수는 증가했으며 크기는 감소하였다. Sucrose는 전분과 수소결합을 형 성하여 용액내에서 가소제처럼 거동함을 알수있었다.

• The Korean Journal of Rheology
• /
• v.10 no.1
• /
• pp.14-23
• /
• 1998

비상용성 고분자 브렌드계인 PS/PP와 EPDM/PP의 유변학적 거동에 미치는 계면의 영향을 알아보았고 그실험 결과를 Park & Lee 모델과 비교하였다. PS/PP와 EPDM/PP 블 렌드계에서의 계면에 의한 전단응력과 법선 응력차에의 기여도는 $textsc{k}$와λ(1-$\mu$), 두 개의 변 수에 의해 잘설명되었다. 특히 계면의 탄성적인 효과와 관련있는 법선응력차 항이 전단 응 력 항보다 더 뚜렷하게 나타났다. 30PS/70PP 블렌드 조성에서는 블렌드의 유변학적 특성이 주로 연속상을 이루는 고분자의 의해 좌우된 반면에 50PS/50PP 블렌드조성에서는 계면에 의한 영향이 더두드러지게 나타났다. 이것은 50/50 블렌드 조성에서 계면의 넓이가 증가한 것과 관계 있다. 그러나 EPDM/PP 블렌드계에서 계면에 의한 응력 항들이 모두 PS/PP 블 렌드계의 그것보다 매우 큰 값을 가졌지만, 그 상대적인 비를 나타내는 $textsc{k}$값은 작았다. 이것 은 블렌드를 구성하고 있는 순수한 성분의 법선응력차 값의 차이가 크기 때문이다. 또한 PS/PP 블렌드계에 대한 동적 계면장력을 Park & Lee 모델을 이용하여 예측해 보았다.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.645-648
• /
• 2005

The rotational barrel type equipment has been designed for the new rheology fabrication process. During the continuous rotation of barrel with a constant temperature, the shear rate is controlled with the rotation speed and rotation time of barrel. The barrel surface can be controlled the temperature by the induction heating and cooling system. Many experiments were widely examined by using this system with controlling the rotation speed and the rotation time. The possibility for the rheoforming process was investigated with microstructural characteristics.

• Journal of the Korean Ceramic Society
• /
• v.42 no.1
• /
• pp.1-6
• /
• 2005

In aqueous alumina tape casting, the effects of altering the composition of the suspensions, the binders and the casting thickness were studied. The rheological behavior of the suspensions and the defects of the dried tapes were examined and the relationships between them are discussed. The changes in the defect regions reported in the previous paper were related with the rheological properties with variations of the binder, the composition and the casting thickness. The shear thinning factor increased with the organic content and the solid content (the decrease of water content). The apparent viscosity increased with the shear thinning factor. The relation between the shear thinning factor and the log apparent viscosity was similar for all binder types. In the relation between the defect free region and the rheological properties, the defect free region became narrower with increasing casting thickness. The defect free region is independent of binder type. Therefore, the thicker tape is more difficult to produce in aqueous alumina tape casting. Knowledge of the rheological properties of the suspensions could help Predict the defect type and the possibility of defect free dried tapes.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.366-366
• /
• 2006

Five sandwiched multilayers consisting of PBT(Polybutyleneterephthalate), PS(Polystyrene) and clay were prepared to investigate the migration mechanism of clay in the polymer blend system. Rheometry (RMS800) was used to apply well-defined shear on the above multilayer samples in order to well understand dominant factors controlling the migration. Applied shear force was enough to move clay tactoids to the interface, if either long time or high shear was available, but it was not sufficient to separate into individual platelets of clay. The morphology evolution was subsequently studied in term of scanning electron microscopy (SEM) and high resolution transmission electron microscopy (HR-TEM), respectively.

• Korea-Australia Rheology Journal
• /
• v.14 no.1
• /
• pp.33-45
• /
• 2002

Recent results obtained for the port-pom model and the constitutive equations with time-strain separability are examined. The time-strain separability in viscoelastic systems Is not a rule derived from fundamental principles but merely a hypothesis based on experimental phenomena, stress relaxation at long times. The violation of separability in the short-time response just after a step strain is also well understood (Archer, 1999). In constitutive modeling, time-strain separability has been extensively employed because of its theoretical simplicity and practical convenience. Here we present a simple analysis that verifies this hypothesis inevitably incurs mathematical inconsistency in the viewpoint of stability. Employing an asymptotic analysis, we show that both differential and integral constitutive equations based on time-strain separability are either Hadamard-type unstable or dissipative unstable. The conclusion drawn in this study is shown to be applicable to the Doi-Edwards model (with independent alignment approximation). Hence, the Hadamardtype instability of the Doi-Edwards model results from the time-strain separability in its formulation, and its remedy may lie in the transition mechanism from Rouse to reptational relaxation supposed by Doi and Edwards. Recently in order to describe the complex rheological behavior of polymer melts with long side branches like low density polyethylene, new constitutive equations called the port-pom equations have been derived in the integral/differential form and also in the simplifled differential type by McLeish and carson on the basis of the reptation dynamics with simplifled branch structure taken into account. In this study mathematical stability analysis under short and high frequency wave disturbances has been performed for these constitutive equations. It is proved that the differential model is globally Hadamard stable, and the integral model seems stable, as long as the orientation tensor remains positive definite or the smooth strain history in the flow is previously given. However cautious attention has to be paid when one employs the simplified version of the constitutive equations without arm withdrawal, since neglecting the arm withdrawal immediately yields Hadamard instability. In the flow regime of creep shear flow where the applied constant shear stress exceeds the maximum achievable value in the steady flow curves, the constitutive equations exhibit severe instability that the solution possesses strong discontinuity at the moment of change of chain dynamics mechanisms.