• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회A
• /
• pp.1481-1486
• /
• 2007

Frictional laws are criticized with emphasis on their application to bulk metal forming simulation in this paper. Coulomb frictional law and constant shear frictional law are investigated in detail in terms of their effect on metal forming process. A friction sensitive bulk metal forming process, a long-pipe simultaneously shrinking and expanding process, is introduced and the problems of the constant shear frictional law are revealed comparing the predictions obtained by the Coulomb frictional law and the constant shear frictional law with the experiments. It is shown that the constant shear frictional law is improper in the case that the normal stress varies very much from position to position and that the normal stress is low compared with flow stress of the adjacent material. It is also shown that the Coulomb frictional constant is more or less affected by the normal stress.

• Geomechanics and Engineering
• /
• 제7권3호
• /
• pp.297-316
• /
• 2014

This paper presents a detailed study focused on investigating the effects of silt content on the static and dynamic properties of sand-silt mixtures. Specimens with a low-plastic silt content of 0, 15, 30 and 50% by weight were tested in static triaxial, cyclic triaxial, and resonant columns in addition to consolidation tests to determine such parameters as compression index, internal friction angle, cohesion, cyclic stress ratio, maximum shear modulus, normalized shear modulus and damping ratio. The test procedures were performed on specimens of three cases: constant void ratio index, e = 0.582; same peak deviator stress of 290 kPa; and constant relative density, $D_r$ = 30%. The test results obtained for both the constant-void-ratio-index and constant-relative-density specimens showed that as silt content increased, the internal friction angle, cyclic stress ratio and maximum shear modulus decreased, but cohesion increased. In testing of the same deviator stress specimens, both cohesion and internal friction angle were insignificantly altered with the increase in silt content. In addition, as silt content increased, the maximum shear modulus increased. The cyclic stress ratio first decreased as silt content increased to reach the threshold silt content and increased thereafter with further increases in silt content. Furthermore, the damping ratio was investigated based on different silt contents in three types of specimens.

• Steel and Composite Structures
• /
• 제28권1호
• /
• pp.111-121
• /
• 2018

It has been argued that fracture energy of composite laminates depends on their thickness and number of layers. In this paper a modified direct energy balance approach (DEBA) has been developed to evaluate the mode-II shear fracture energy for E-glass/Epoxy laminates from finite element model at an arbitrary thickness. This approach considers friction and damage/plasticity deformations using cohesive zone modeling (CZM) and nonlinear finite element modeling. The presence of compressive stress and resulting friction was argued to be a possible cause for the thickness dependency of fracture energy. In the finite element modeling, CZM formulation has been developed with bilinear cohesive constitutive law combined with friction consideration. Also ply element have been developed with shear plastic damage model. Modified direct energy balance approach has been proposed for estimation of mode-II shear fracture energy. Experiments were performed on laminates of glass epoxy specimens for characterization of material parameters and determination of mode-II fracture energies for different thicknesses. Effect of laminate thickness on fracture energy of transverse crack tension (TCT) and end notched flexure (ENF) specimens has been numerically studied and comparison with experimental results has been made. It is shown that the developed numerical approach is capable of estimating increase in fracture energy due to size effect.

• Steel and Composite Structures
• /
• 제20권2호
• /
• pp.251-266
• /
• 2016

The paper combines two distinct parts. First the behavior of welded headed studs with small diameters of 10 and 13 mm acting as shear connectors (which are not embraced in current standards) is studied. Based on standard push tests the load-slip relationships and strengths are evaluated. While the current standard (Eurocode 4 and AISC) formulas used for such studs give reasonable but too conservative strengths, less conservative and full load-slip rigidities are evaluated and recommended for a subsequent investigation or design. In the second part of the paper the partially encased beams under bending are analyzed. Following former experiments showing rather indistinct role of studs used for shear connection in such beams their role is studied. Numerical model employing ANSYS software is presented and validated using former experimental data. Subsequent parametric studies investigate the longitudinal shear between steel and concrete parts of the beams with respect to friction at the steel and concrete interface and contribution of studs with small diameters required predominantly for assembly stages (concreting). Substantial influence of the friction and effect of concrete confinement was observed with rather less noticeable contribution of the studs. Distribution of the longitudinal shear and its sharing between friction and studs is presented with concluding remarks.

• 한국지반환경공학회 논문집
• /
• 제11권3호
• /
• pp.23-32
• /
• 2010

흙채움 마대는 현장의 재료를 사용하여 간편하게 사면 및 제방의 복구나 보강에 사용되고 있다. 이런 흙채움 마대의 전단저항력을 증가시키기 위해 흙채움 마대 상 하면에 벨크로(Velcro)를 부착한 흙채움 마대가 개발되었으며, 벨크로를 부착한 흙채움 마대의 역학적 특성을 분석하기 위해 대형직접전단실험과 원호파괴를 가정한 실내모형실험이 수행되었다. 실제 벨크로가 부착된 마대를 이용해 사면을 설계하기 위해 흙-토목섬유 요소실험을 실시하여 강도정수를 파악하였다. 그리고 사면형성 시 벨크로와 흙채움 마대가 혼재하고 있기 때문에 정확한 파괴면을 알 수 없다. 따라서 실내모형실험을 통해 내적파괴에 대한 거동을 분석하고, 역해석을 통해 설계강도정수를 제안하였다. 흙-토목섬유의 요소실험결과, 벨크로의 부착으로 인해 흙채움 마대 상호간의 전단저항 정수인 내부마찰각과 점착력의 증가가 나타났으며, 특히 내부마찰각보다는 점착력의 뚜렷한 증가가 나타난 것으로 분석되었다. 또한, 실내모형실험 결과, 지지력이 20%이상 증가해 대형장비의 주행성 증가와 시공속도의 증대를 가져올 것으로 판단된다.

• Geomechanics and Engineering
• /
• 제22권2호
• /
• pp.165-171
• /
• 2020

Laboratory determination of strength and deformation behavior of clean sands and gravels has always been challenging due to the difficulty in obtaining their undisturbed samples. An alternative solution to this problem is to develop correlations between mechanical properties of cohesionless soils and their gradation characteristics. This study presents database of 3 natural sands with 11 varying particle size gradation curves to allow investigating relationships between mean particle size, maximum and minimum void ratio, relative density and shear strength of the test soils. Direct shear tests were performed at relative densities of 50, 75 and 95% to explore the effects of gradation and density on the angle of internal friction of the modeled sand samples. It is found that the mean grain size D₅₀ bears good correlations with void ratio range (e_max - e_min) and peak angle of internal friction 𝜙'_peak. The generated regression models are in good agreement with published literature and can be considered as reliable for natural sands in Pakistan. These empirical correlations can save considerable time and efforts involved in laboratory and field testing.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.181-185
• /
• 2001

This paper deals with the dynamic stability of a disc brake pad taking into account of its shear deformation and rotary inertia. A brake pad can be modeled as a beam like model subjected to distributed friction forces and having two translational springs. The study of this model is intended to provide a fundamental understanding of dynamic stability of drum brake pad. Governing equations of motion are derived from extended Hamilton's principle and their corresponding numerical solutions are obtained by applying the finite element formulation. The critical distributed friction force and the instability types are investigated bt changing two translational spring constants, rotary inertia parameter and shear deformation parameter. Also, the changes of eigen-frequencies of a beam determining instability types are investigated for various combinations of two translational spring constants.

• Journal of Welding and Joining
• /
• 제24권1호
• /
• pp.50-55
• /
• 2006

In an attempt to optimize friction spot joining process of Al alloys for automobiles, effects of joining parameters such as tool rotating speed, plunging depth, and joining time on the joints properties were investigated. A wide range of joining conditions could be applied to join Al alloys for automobile without defects in the weld zone except for certain welding conditions with a lower heat input. For sound joints without defects, tensile shear strength of joints was higher than acceptable criteria of tensile shear strength of resistance spot welded joints for aluminum.

• 터널과지하공간
• /
• 제29권5호
• /
• pp.292-304
• /
• 2019

완만한 거칠기를 갖는 석회암 자연절리면에 대하여 KSRM 표준시험법에 의거한 개별적 직접전단시험과 수직응력을 단계별로 조절하는 다단계 직접전단시험을 실시하였다. 각 시험을 통해 전단시험 전후의 절리면 거칠기 변화를 알아보았고, 두 가지 시험에서 얻은 전단특성 값의 차이를 분석하였다. 두 가지 시험에서 모두 절리면의 거칠기가 클수록 전단저항은 증가하였으며, 수직응력이 증가할수록 절리면의 전단에 필요한 최대전단응력 값은 증가하였다. 다단계 직접전단시험으로 구한 최대마찰각은 개별적 직접 전단시험으로 구한 것의 63% 수준에 불과하였다. 다단계시험은 절리면 요철부의 초기 맞물림이 단계적인 전단과정에 따라 시험 중 수시로 변화되어 원래의 거칠기가 변형되기 때문에 암석 절리면의 마찰각을 구할 때는 개별적 직접전단시험이 더 유효한 방법으로 판단된다. JRC값 4~8의 완만한 거칠기를 갖는 석회암 절리면의 물성값은 최대마찰각 $47^{\circ}$, 잔류마찰각 $38^{\circ}$, 점착력 37 kPa으로 평가되었다.

• 한국전산구조공학회논문집
• /
• 제22권1호
• /
• pp.105-115
• /
• 2009

휨거동을 하는 전단벽을 대상으로 동일한 총 단면적을 갖는 1개의 전단벽과 마찰형 감쇠기로 연결된 전단벽의 내진성능을 수치해석을 통해 비교하였다. KBC 2005 설계스펙트럼을 근거로 축소 조절한 7개의 지진파를 입력하중으로 마찰형 감쇠기가 설치된 전단벽의 평균응답을 분석하였다. 마찰형 감쇠기의 중요한 설계변수인 기준 마찰력인 슬립하중은 각층의 마찰형 감쇠기 위치에 생기는 수직방향 전단력의 총합의 5, 10, 20, 30, 60, 90%값으로 하여 슬립이 특정한 층에 편중되지 않도록 하였다. SeismoSturct 프로그램을 이용해 비선형시간이력 해석을 수행하여 밑면 전단력, 에너지 소산량, 1층 벽체곡률, 최상층변위 측면에서 마찰 감쇠기의 제진성능을 분석하였다. 기준마찰력의 30%이하 수준의 총 마찰력을 갖는 마찰 감쇠기가 우수한 제진성능을 보였다.