• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2000년도 춘계학술대회 논문집
• /
• pp.415-422
• /
• 2000

The Seoul Subway Line 4 crossing downtown diagonally constructed in February 1980 and opened on October 11, 1983. The line 4 is thus able to link southern and northern parts of Seoul with the downtown as well as with the Seoul outskirts. More than 810,000 people use it everyday. Line 4 was constructed like Line 1,2,3 with ballast track system causing much maintenance cost gradually and espicially much public discontent due to wheel and rail contact noise by railway viaduct with sharp curves. CWR on railway viaduct with sharp curves, 180m$\leq$R$\leq$300m, hasn't been designed and constructed ever in domestic. Therefore in order to reduce noise and vibration caused by interaction between wheel and rail the possibility and the methods of CWR(Continuous Welded Rail) on railway viaduct with sharp curve less than R300 will lead it to the maintenance free system.

• 한국도시철도학회논문집
• /
• 제6권4호
• /
• pp.411-416
• /
• 2018

급 곡선상에 분기기를 부설하여 운용하는 것은 일반적으로 열차안전에 바람직하지 않으나, 직선을 확보할 만큼 충분한 공간을 확보할 수 없는 산악지역이나 차량기지에서는 제한적으로 선로 곡선 부에 분기기를 설치하는 때도 있다. 본 연구에서는 급 곡선상 분기기에서 실제로 발생한 열차탈선사고의 원인을 분석하기 위하여 사고가 발생한 위치에서 측정한 선로 데이터와 사고 차량의 데이터들을 이용하여 탈선해석을 수행하였다. 탈선해석결과 곡선 선로의 분기기 시작점에서 탈선계수 값이 최대가 되며 그 크기도 1.37로써 탈선을 유발할 정도로 큰 것으로 나타났으며, 이는 실제 탈선사고가 발생한 현장조사 결과와 일치함을 알 수 있었다.

• 한국정밀공학회지
• /
• 제17권2호
• /
• pp.73-79
• /
• 2000

The part-surface of mold or stamping-dies consists of a compound surface which consists of lots of composite surfaces, and may have various types of feature shapes including convex sharp edge (CSE). Those CSE features should be considered with care in machining the surface, which necessitates extraction of CSE curves on a compound surface. This work can be done rather easily for a solid model which has a complete topology information. In case of the compound surface without topology information, however, such CSE curves must be gathered through some geometrical calculations paying much computation time. In the paper, extracting CSE curves by the construction of a CSE region-map which can reduce time, and detecting various common edge types are presented.

• Structural Engineering and Mechanics
• /
• 제34권3호
• /
• pp.367-376
• /
• 2010

In this paper, an experimental investigation of the mechanical behavior and buckling failure of sharp-notched circular tubes subjected to cyclic bending is discussed. The unnotched and sharp-notched circular tubes of SUS 304 stainless steel were tested under symmetric curvature-controlled cyclic bending. It was found from moment-curvature curves that the loops show cyclic hardening and gradually steady after a few cycles for all tested tubes. The ovalization-curvature curves show an unsymmetric, ratcheting and increasing manner with the number of cycles. In addition, it was found that six almost parallel lines corresponding to unnotched and five different notch-depth (0.2, 0.4, 0.6, 0.8 and 1.0 mm) tubes were noted from the experimental relationship between the cyclic controlled curvature and the number of cycles necessary to produce buckling on a log-log scale. An empirical formulation was proposed so that it could be used for simulating the aforementioned relationship. By comparing with the experimental finding, the simulation was in good agreement with the experimental data.

• 대한기계학회논문집
• /
• 제10권3호
• /
• pp.335-342
• /
• 1986

본 연구에서는 이러한 가능성을 알아 보기 위하여 오리피스판을 통하여 기액 2상흐름이 있을 때 각 상의 유량변화레 따른 순간압력강하치를 분석하고자 한다. 우선 평균압력강하치를 측정하여 식 (1)과 비교 분석하며, 교란치의 평균진폭과 교란 강도를 구하여 기공율의 변화에 따른 이러한 통계치들의 경향을 고찰한다. 그리고 순간압력강하 곡선에 대한 통계함수들, 확률밀도함수(probability density function) 와 자기상관함수(auto-correlation function)을 구하여 이 들의 통계적 성질을 구명 하고 2상 유동량의 결정에 대한 교란치의 할동도를 토의한다.

• 대한교통학회지
• /
• 제22권7호
• /
• pp.139-146
• /
• 2004

도로 설계는 운전자의 기대와 일치되는 방향으로 수행되는 것이 바람직하다. 긴 직선과 곡선반경이 작은 곡선의 연결을 피하는 것이 도로 설계 일관성 관점에서 본 일반화된 설계 원칙이다. 연속된 도로 선형의 일관성을 평가하기 위한 방법으로 주행속도 프로파일 모형이 활용되고 있으며, 이 모형에는 긴 직선-곡선 연결선형에서 운전자의 주행행태 변화에 대한 가설이 포함되어 있다. 본 연구는 기존 주행속도 프로파일 모형에 내재된 운전자 주행행태에 대한 가설과 실제 긴 직선-곡선 연결선형에서 조사된 운전자의 주행행태 결과를 비교하였으며, 신뢰성 있는 주행속도 프로파일 모형의 구축을 위해 요구되는 운전자의 곡선부 진입 및 진출 시 가속도의 변화를 외국의 연구에서 제시한 값과 비교하는 방식으로 분석하였다. 분석결과, 모형에 내재된 긴 직선-곡선 연결선형에서 운전자의 주행행태가 실제 조사된 운전자의 주행행태 변화를 잘 설명해주고 있었다. 곡선 진입시 감속도는 $0.39{\sim}1.06m/s^2$으로 분포하였으며, 평균은 $0.66m/s^2$으로 나타났다. 곡선 진출부 가속도는 평균 $0.22m/s^2$으로 나타났다.

• 대한화학회지
• /
• 제7권2호
• /
• pp.96-105
• /
• 1963

The weight decrease curves of 18 kinds of polymers have been measured by thermobalance at the same condition where temperature is increased $1^{\circ}C$ per minutes under nitrogen or air atmosphere. The curves are further differentiated to obtain rate curve of weight decrease. Those curve offer a method to compare relative thermal stability, effects of oxygen or modes of thermal degradation of polymers qualitatively. The curves could be classified into following four types: Polystyrene, polymethylmethacrylate and acetal polymer belong to the first type. Those polymers depolymerize mainly into corresponding monomers, weight decrease curves are steepy up to perfect vaporization of polymers and rate curves show a relatively sharp peak. (Type I) Polyvinyl chloride represents the second type. This polymer decomposes with splitting off of hydrogen chloride. The thermogravimetric curve rises rapidly at first, then level off at the moderate weight decrease and gradually rises. Polyvinyl acetate also belongs to this class. (Type II) The modification of the second type is represented by polyester. The curve at the early stage is less steep, the leveling off at the next stage is less clear and the final rising of the curve is steeper than the normal second type. Polyamide, polyurethane, and polycarbonate belong to this type. (Type II') The thermal decomposition of the third type polymers is more complex than that of others. Various irregular chain scissions including side chain splitting and depolymerization to monomers occur simultaneously. The weight of the polymer decreases gradually and the rate curve does not show sharp peaks. Polyvinyl alcohol and diene polymers belong to this type. (Type III) Generally, polycondensation polymers are more stable toward heat than addition polymers and polymers having aromatic nucleus show good thermal stability. Polymers having tertiary carbon atoms such as polystyrene or polypropylene and acetal resin start decomposition under airatmosphere at the temprature below $50^{\circ}C$ or more of the temperature where the polymers start decomposition under nitrogen atmosphere.

• 대한수학회논문집
• /
• 제20권4호
• /
• pp.861-873
• /
• 2005

In this paper we approximate a cylindrical helix by bi-conic and bi-quadratic Bezier curves. Each approximation method is $G^1$ end-points interpolation of the helix. We present a sharp upper bound of the Hausdorff distance between the helix and each approximation curve. We also show that the error bound has the approximation order three and monotone increases as the length of the helix increases. As an illustration we give some numerical examples.

• 충청수학회지
• /
• 제28권2호
• /
• pp.251-259
• /
• 2015

Let $\mathbb{F}^d_q$ be a d-dimensional vector space over a finite field $\mathbb{F}^d_q$ with q elements. We endow the space $\mathbb{F}^d_q$ with a normalized counting measure dx. Let ${\sigma}$ be a normalized surface measure on an algebraic variety V contained in the space ($\mathbb{F}^d_q$, dx). We define the restricted averaging operator AV by $A_Vf(X)=f*{\sigma}(x)$ for $x{\in}V$, where $f:(\mathbb{F}^d_q,dx){\rightarrow}\mathbb{C}$: In this paper, we initially investigate $L^p{\rightarrow}L^r$ estimates of the restricted averaging operator AV. As a main result, we obtain the optimal results on this problem in the case when the varieties V are any nondegenerate algebraic curves in two dimensional vector spaces over finite fields. The Fourier restriction estimates for curves on $\mathbb{F}^2_q$ play a crucial role in proving our results.

• Applied Microscopy
• /
• 제47권3호
• /
• pp.110-120
• /
• 2017

Non-isothermal thermogravimetry (TG) measurements on melt-quenched $Bi_xSe_{100-x}$ specimens (x=0, 2.5, 7.5 at%) were made at a heating rate ${\beta}=10^{\circ}C/min$ in the range $T=35^{\circ}C{\sim}950^{\circ}C$. The as-measured TG curves confirm that $Bi_xSe_{100-x}$ samples were thermally stable with minor loss at $T{\leq}400^{\circ}C$ and mass loss starts to decrease up to $600^{\circ}C$, beyond which trivial mass loss was observed. These TG curves were used to estimate molar (Se/Bi)-ratios of $Bi_xSe_{100-x}$ samples, which were not in accordance with initial composition. Shaping features of conversion curves ${\alpha}(T)-T$ of $Bi_xSe_{100-x}$ samples combined with a reliable flow chart were used to reduce kinetic mechanisms that would have caused their thermal mass loss to few nth-order reaction models of the form $f[{\alpha}(T)]{\propto}[1-{\alpha}(T)]^n$ (n=1/2, 2/3, and 1). The constructed ${\alpha}(T)-T$ and $(d{\alpha}(T)/dT)-T$ curves were analyzed using Coats-Redfern (CR) and Achar-Brindley-Sharp (ABS) kinetic formulas on basis of these model functions, but the linearity of attained plots were good in a limited ${\alpha}(T)-region$. The applicability of CR and ABS methods, with model function of kinetic reaction mechanism R0 (n=0), was notable as they gave best linear fits over much broader ${\alpha}(T)-range$.